#magic#tutorial#trick#amazing This video demonstrates an interesting magic trick that turns a drawing on paper into a real object.
The performance: The magician places a piece of paper with a drawing of a key ring into a small box. When the box is closed and reopened, the piece of paper disappears, and a real key ring appears.
The trick revealed: The box is specially designed with magnets hidden in the lid and a false bottom. The real key ring is pre-hidden in a slit at the bottom of the box. When the box is closed, the magnets in the lid pull the false bottom and the piece of paper upwards, hiding them. At the same time, when the magician gently presses the box down on the table, the real key ring is pushed up.
AI Generated·May contain errors
Comments are disabled for this video.
Hello there, welcome everybody. Don here once more with another magic trick for you.
I'll show you the trick and then later reveal how it's done and also how you can make it.
You may have noticed from the title of this video, Mini 3D Printer, you might think I'm
encouraging clickbait by getting people that are interested in 3D printers to come over to my
magic channel and I get more viewers. If that's what you think, you're absolutely right.
I'm trying to encourage as many viewers as possible, so we'll see if it works.
OK, so like a 3D printer, we've got our little machine here. You can see just a little box
and I'll just leave it there for a moment.
And like a printer, what you do is tell the machine what you want it to produce
and I will draw a very precise and accurate keyring. OK, that's what I want from the machine.
OK, if I tell it that and we'll fold that over and we'll stick that in the machine.
I like that. OK, and if we close the box, that's exactly what we get. A keyring. There we go.
Isn't that amazing? OK, so should you want to know how it's done and how to make it,
please watch the rest of the video. In the meantime, please subscribe to the channel
if you don't mind. OK, well, without further ado, let's get on with it and we'll see exactly
what we need to do. So I made the ring box in two halves and I made them two and a half inches or
62 millimetres, 63 millimetres by two inches or five centimetres.
But of course, they can be any size you like. And for the first half, I've inset a top.
So there's the bottom. But the inset is just set a bit low because this ring is going to go right
the way down there and level with that inset and then this sticking out the bottom. But of course,
the audience won't see that. And then when the top is on, all I have to do is put it down onto the
deck and then it will be revealed. OK, so for the time being, that's where the ring will sit like
that. And then there is another piece the same size with four magnets on each corner and that
will sit into that recess like that. OK, so then when we mark out the circle like that, which is
what we want, something like that, and fold that over and put that into that little recess there,
it will go in. And then on the top, there's another false bottom, if you like, with the
corresponding four magnets in those corners. So when I hinge the box together like that,
that will come across. The middle part will stick up in. Well, it should stick up into the
top like that and get rid of that paper. And then I can press the box down and when I open it,
it will reveal the key ring. OK, so that's basically it. I will use
this, I can never remember the name of it, masking tape, cloth tape, that's it, cloth tape or gaffer
tape to make a hinge. So if I put those two together and just put a piece on the back there,
that will make a hinge like that. So it's in its rough state, as you can see at the minute, so I'll
make it look a little more presentable and I'll be back in one moment and we'll see what it looks
like then. So I finished the box off completely and decorated it in my normal fashion, put that
piece of cloth tape along the back. Although cloth tape is extremely sticky, I don't trust it to act
as a hinge. So I use PVA glue on the back of the cloth tape and then just let that dry and then
that acts as a permanent hinge like that and a little bit on the inside as well. OK, so we've
got our box and then we can put our ring down there and hide that down there like that and then
we can put our false bottom in there and then I can stick that on its stand and then to start the trick
I want a key ring like that, that shape. OK, so if I fold that, put that into the slot
like that. OK, and then with a quick bang then automatically it changes to the ring.
OK, there we go. I think that's a neat little trick, worth having a go at making. Very easy
to make, pretty self-explanatory, I think. OK, so I will leave it there. Thank you very much
for watching the video. I do appreciate you watching these. If you wouldn't mind subscribing
that would be even better. If you click the All button you will be informed when new videos come
along. OK, so thanks for watching. I'll see you in the next video and until then it's bye for now.