Building a Waterfall Paludarium for Shrimp and Rare Plants!

Mini World Craft
6 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThe creator documents the step-by-step process of building a custom paludarium, from cleaning the tank and constructing a waterfall to planting and adding a cleanup crew. The project emphasizes functional design, such as maintaining pump access and using specific substrates to support a variety of aquatic and terrestrial plants.
We need to make another terrarium. That's the tank. That's kind of how we're going to make it,
I believe. Before I do anything with this tank, um, I do need to clean it. Here's all our wood.
Also, because some of this wood has been collected and not all bought, we are going to boil it.
I've brought the tank back outside. Uh, when I did the big paludarium in my room, it was
not good. I kept inhaling too much silicone fumes. So we're doing that out here. So I'm
going to be using this photo. I'm trying to recreate. That's quite nice. Using a Gatorade
bottle to hold it up and a Powerade behind it. It's the next day. This is dry. We're going to
take away all the supports, bring it inside and start our waterfall. We're going to add a waterfall
in this back corner. I'm going to try and keep access to the pump if need be. So some of the
rocks may be a little bit loose or just able to move them so we can get to the pump. That's the
plan. Got some rocks. We've got most of the rocks then, as you can see. Some of my naughty
word eyes. Now for some reason, when is it still smoking? Can you see that? Can you see it smoking?
It was literally just smoking. When super glue connects with this, it like gets really, really
hot. And I just tried to take it off with some paper towel and it was quite thick and it just
went straight through to my finger and melted this to my finger. And it was smoking and fumes
gone in my eyes. So if I go blind tomorrow, that sucks. This big rock at the bottom, we did plan
to be able to pull it out in case we need to access the pump at all. Look at that. Some of these
little gaps. I'm going to try filling using little rocks to fill them up. All of the silicone has
been finished. It looks beautiful. In this back section where we want to have a little pocket
to put some plants in and maybe here and back here, I'm going to cut out some pieces of filter
foam and that's going to just hold the soil in place because right now that just goes all the
way to the floor. This little piece is going to go on the back. Everything is dry for the background.
What I'm going to do is put a layer of silicone straight onto the back and put some coir onto it
so I can soak up water. Similar to my last paludarium, so I can see the waterfall and
into the tank from the side a little bit, I'm going to keep a bit of a viewing window over here.
All of the weed mat is in place as you can see. I'm going to fill it up with water and we'll do
a little water test. I've stolen one of the nozzles out of this tank. We have two nozzles now.
Misty nozzles are in. This log's a little bit in the way so I'm hoping it'll kind of go over it
reach to this pocket and this pocket. This is our substrate. I don't know why there's a
quite chunky. All the pockets are filled in with some soil or sphagnum moss. Have a look at some
of the plants that we have. I'm going to be stealing some out of here, some out of here as
well. The first one I did find in our tub is this monstera laniata mint. We are just going to be
chopping it about here. Next I'm going to add this pomelo cutting. I'm kind of just going to
break off little pieces like this. Next plant I'm going to put in is Ardisia bengkulu.
It's the next day. I got myself a tiny little nepenthes. I'm not sure what the species is.
It doesn't have a name on it but we can put them in. Back it open. There is more effective ways to
make a springtail tub. This also does have isopods in it but I think it looks cool. Give them a home
you know. There's also a fox skull in here so they feel at home. Look they've got a few plants.
Happy springtails are good springtails you know. I'm not going to imprison them bro.
Clean it up a bit. I'm going to fill it up with some water, wash it out,
siphon the rest out. It's time to put some substrate in the bottom. Got some conscious
oil for our nutrients and I'm going to use this iwagumi substrate for aesthetic.
So we're going to do the vinyl now. I've cut out a little bit so you can see the pump and just watch
for when it needs to be maintained. This side of the tank we do want to be able to see into it.
I'm going to start putting some plants in the water. Nice piece of java fern here. I'm going
to chop this up, use it a fair bit. Seeing as there's no filter in this setup I do want to
have some other plants which will take some more of the nutrients out of the water. So we're going
to use this dwarf philodendron. It's dwarf bipenifolium. It's been quite a while since we
made this terrarium here. I did change out some of the plants in it because they weren't too happy
so I'm just going to do a bit of an update, see what we've changed, how everything else is doing
That's it. I hope you enjoyed. Thanks for watching.
