Get Rid of Excess Play When Mounting Your Optic to Your Rifle

Tactical Military Gear & Gadgets
4 followers
Aug 17, 2026
In this quick tip, Billy Leahy Former USCG Precision Marksmanship Instructor, shares a tip to remove the excess movement that can be experienced when mounting an optic incorrectly.
AI Generated·May contain errors
Video Summary
AI GeneratedThis video explains how to properly mount a rifle scope by eliminating \"play\" or slack between the optic and the Picatinny rail. By pushing the scope forward before tightening, shooters can prevent the recoil from shifting the optic during the first shot, ensuring a more consistent zero and saving ammunition.
Hey Billy with Tactical Hive. Today we're going to talk about mounting the scope to your rifle and
how to take out the slack or any play that's in the rifle so you're not wasting rounds whenever
you get into your zero. So what happens is whenever we put the scope on the rifle there's
a little bit of slack in between each of these pick rails and whenever you shoot your first time
the recoil of the rifle then kicks the scope forward and takes that play out of the scope.
Well then your next shot you're going to impact somewhere different. Okay then your next shot
is going to be where your last shot was right because the consistency but your first shot
you're going to be like why is that thing off of there. So what ended up happening is your scope
rode forward on the rifle and then shifted where we impact at the target. Now the shift is going
to be really slight but let's just show you what we're going to do here to save you a little bit
of time and ammo. So as we put the scope on the rifle lock it in make sure we're hooked onto our
pick where we need to and as we go back and forth you'll be able to feel the play in the optic and
that's what I'm talking about here. So push everything forward because the gun wants to
come back so everything on the rifle is going to want to shift forward. As we shift the scope forward
we're going to hand tighten our mount and then we'll put our torque spec on it.
