Turning Cheap Thrift Store Furniture Into a Designer Look

Trash To Treasure
3 followers
Aug 16, 2026
In this video I'm upgrading these $10 thrifted nightstands into something designer!
Cost: $30
Materials: $255
Sold: $
Profit: $
AI Generated·May contain errors
One thing I've learned after flipping hundreds of pieces of furniture is that adding paint doesn't
automatically make something look expensive. These nightstands have laminated tops, tons of
damaged veneer, and plenty of scratches, but none of those are truly what's wrong with these pieces
of furniture. I'm going to show you exactly how to update outdated furniture and bring it into
the modern era to look and feel like designer pieces on a budget.
I got these two nightstands for just $10. Wait a second.
I got these three nightstands for just $10 each at Goodwill. Looks to be that they are all from
the same set, but typically someone isn't going to want three of the same nightstands, so my plan is
to refinish a set and sell them as a pair, and then sell the third one on its own. But
unfortunately, the only few things that they've got going for them is the size and the shape,
because I feel like the size and shape of these nightstands is pretty desirable, but there are
several things that are not great about these nightstands, including laminate top, tons of
damage. These are definitely giving file cabinet look, and the base down below definitely outdates
them quite a bit. So we've got a lot of work to do. Let's get started by disassembling and
cleaning everything to assess what we've really got to do. Drawers are labeled and removed,
and we've got to tackle some stickers on the front of these drawers. Three of them had some
stickers that I couldn't just remove by, like, lifting them with a scraper, so I'm gonna get
some Goo Gone, and we're just gonna spray it, let it soak a little bit, and scrape them off.
The next order of business is talking about the major update that I am going to do on each one
of these pieces. I am going to be chopping off the existing base, if you will call it that.
It's recessed in, basically. It's standing on its own sides, and I just feel like that dates the
pieces so much. I think that it would be much better if we can elevate the pieces off of the
ground. So the first order of business is to grab out the saw and chop all of that off. We are going
to be doing that on all three pieces, and then I will talk about what type of base I think is going
to be the best to modernize these nightstands. We're looking much better with all of those bases
cut off. Now we've got a fresh slate to add on whatever I feel like adding on to, again,
make these more modernized. So the next step that I'm going to do is to start doing a little bit of
filling. There are a ton of gouges on these, a lot of scratches that are pretty deep, and then also
just some missing veneer and dents and things like that. So I'm going to address the things that I
can fill in with Bondo, and then I'm going to kind of see what may be able to be sanded out versus
needing to be filled for sure. And then while I've got the Bondo out, I'm also going to be filling
the hardware areas because I want to replace the hardware. Now these are quite large in size,
so I'm not just going to use Bondo. I'm going to figure out something that can fill most of
that space and get it in there, and then we'll fill in the rest with Bondo just to help minimize
the job that Bondo has and also to minimize the potential of like things sinking in
and this area being really visible even after the paint is on. Okay, I've gotten a lot done here. I
got everything sanded down. The Bondo in those hardware holes look great and feel great. A lot
of the times if you can feel a difference in the regular surface to wherever you've Bondo'd,
then you're going to see a difference, and it really feels very flat and flush. And then I also
wrapped all the drawers and scuff sanded everywhere. So now I'm going to spray my primer.
I've got my favorite Ben Advanced primer tinted to gray. This is a water-based, so I've loaded
my spray gun with the Ben Advanced right here. This is my Wagner Flexio 5000, and I'm just going
to spray one coat to start, and I want to make sure that there's no other damage that I may have
missed when filling everything with Bondo. I want to make sure that the hardware is all, like where
the hardware was, is all nice and flat and not visible. And then this flip, I want to make sure
that there's no wood grain showing. So this primer is going to do all of that, like allow me to see
all of that so I can make any more perfections that I need to. And then on top of that, it's
going to block any tannins that may bleed through to the paint color once I get that on. And it's
also going to be a good bonding agent for these because the top is laminate and it's really slick.
I did do scuff sanding on it, so that's a good thing to do to start the bonding process.
But the bin primer is going to also help with the bonding process so things
don't just scratch right off. Since I cut the bases from the original pieces off of the bottoms,
obviously I have to add something. They can't just sit on the ground as boxes. It's been a while,
but I decided that I am going to be making bases for these using pocket holes, red oak,
and my kreg jigs. So I've got all of my wood down here and I measured everything. So a little quick
rundown on how to measure for bases. I do have more in-depth videos. Just go on my channel,
search how to build a base, and literally videos will pop up that will show you even more in-depth.
So keep that in mind if you get a little lost or if you need a more step-by-step if you're doing
this as well. Anyway, we need three pieces of wood that is a one by three, and I like to use
red oak because it's a hardwood and it's just going to be a lot more stable than something
like pine would be. So we need one for the front and two for the sides, and then we need two by
twos, which is actually one and a half by one and a half. So keep that in mind when you're doing
your measurements because once you measure the width you need to subtract three because you're
going to be putting two legs on each like one on each corner so that's going to subtract three
inches. So my nightstands I measured were 30 inches wide which means I need to subtract three
so we've got 27 and I need three of those and then my nightstands were 18 deep so I need to
subtract three which is 15 and I need six of those two on each piece. Then we'll discuss how I decide
what height I'm going to make my legs but first let's get those apron pieces cut
and I'm going to do that right over here on my miter saw.
Okay I got those aprons cut so now we need to talk about the legs and how I typically determine
the size the height of my legs on bases is. I usually do a little bit of research. I look up
the dimensions of standard nightstands and then I kind of tailor mine to be such as a similar size.
So for this one I knew mine were 30 wide and 18 deep and they're probably on the larger side so
potentially going to be going into a room that has enough space for a king bed a king bedroom set
so I wanted to make sure that these are going to be tall enough to accommodate that but also be
proportionate to the remainder of the piece. So they're 26 inches tall without any legs like after
I cut them off so that meant that the standard king size is anywhere from 28 to 32 inches because
you kind of want to match like the top of the bed the mattress so I decided that I am going to go
right at about 30 and a half so we're going to do four and a half inch legs. I thought about going
up to the five but I think that just might be a little bit too tall and so I think we're going
to go with four and a half but I don't know I'm still a little skeptical about that because 30
and a half or the yeah just a lot of things these aprons are two and a half inches and so if I do
the four and a half that means that there's only going to be two inches of leg under the apron
which I think is going to be plenty I've done four and a half inches before so I think it's going to
be the right move and if I don't love it I guess I can always change it but for this time we're
gonna send it at the four and a half okay so this is about what it's going to look like and I think
that that is honestly fine I like the way that that looks I think that's enough down below that
it's not off at all like it looks like it goes well together and then what I like to do for the
legs especially is to take the leg and then start to measure and cut based on the height of this
because measuring is always great but there can always be like literally a 16th or 1 32nd of an
inch off and then it could tilt and stuff so this is how I've managed to get really good even legs
is to line it up like this and then put my saw down and just push this up against and that's
exactly where I will then make my cut I've got my kreg 720 pro jig all set up here on top of my work
bench I've got it clamped down below so it's not going anywhere it's not moving and then also kreg
semi recently came out with a small shop vac that is like for the tabletop and you can just put the
hose directly into the pocket hole maker and then it sucks up all of the sawdust or all of the you
know wood that's coming out when you're making those pocket holes which I always feel like I
have such a mess with so this is super awesome game changer because it's small and you don't
have to have like a huge long hose it's table it's perfect for the tabletop and then the wood
still fits right in so for each piece each front piece and side piece we need to make two pocket
holes on the sides each side and then we need to make a few that are going to help us attach it to
the bottom of the piece once we have it all secured and we're ready to put those on
so I'll start with the side pieces and then we'll also do those other pieces or those other
screw holes as well so this is a completed piece for the front now I'm going to repeat that on
the other two front pieces as well as the side pieces to where we've got two that screw into
the legs and then we've got a few depending on how long the piece is
to go directly up into the bottom of that piece so let's do it
it's time to go ahead and start to put the bases together now when you are putting bases together
you just want to make sure that they're reinforced really well so you're going to want to use
pocket hole screws I've got a huge bucket of them because I make so many bases and then you're also
going to want to put them together with a little bit of wood glue so the wood glue I always use
tight bond it's something that just really really works and it is so so strong when it dries
actually wood glue is stronger than nails stronger than screws when it's
like forming that bond so and then the other thing that we're gonna make sure of and I still
get this wrong even when I make sure so it's you just gotta make sure you catch it in time but
essentially you want to make sure that all of your holes that are going to go up into the base
are one facing the correct direction so like your sides and your front but then also you want to
make sure that your legs go on the appropriate side so if they're pointing up you want the
excess to be below that not the opposite way or else there's nothing for it to connect to the
bottom of the nightstand so with that being said I and then you also need a clamp as well
and your drill to put the screws in so I like to clamp the leg to the actual surface here
so that it doesn't budge and then I'll take my piece my front piece and I'll make sure that it's
nice and lined up we'll put a little bit of glue on it just a little bit you don't need a ton
you don't want it to be like seeping out or anything so then we'll put some glue on it
and we'll line it up making sure that it's flush with the top of that leg over there
and then last we'll just go ahead take some pocket hole screws when you're using wood that
three-quarter inch you are going to make sure that you have the one and a quarter inch pocket
hole screws so that it goes in enough but not too much to like penetrate through the other side
just like that we've got three bases for the nightstands one thing that I did differently on
this set of bases is instead of leaving the harsh corners on the legs and then on the underside
is I just sanded a tad bit of a little curve that way it's not so sharp and also just a little bit
more custom so that it just looks really nice and then once I decide on the stain color for these
I will go ahead and stain them I haven't fully nailed down the color scheme of these yet
but that is coming very soon the primer is all dry now so we gotta go over and check and see
if there's any wood grain showing because I really want to eliminate all of that in this flip
so let's go check it out as I'm coming over here to check out the drawer fronts and even the sides
of the nightstands I'm noticing that there is a lot of wood grain showing through which I thought
would be the case but as I've stated a few times I think it's so necessary for specific projects
to not allow wood grain to come through but on some it's totally okay and even kind of fun to
lean into that a little bit well for this one I don't want any wood grain because of the old
hardware placement and how huge those holes were that I had to fill them and that was going to be
completely flat with wood grain kind of surrounding it and I just think that it would look
really weird so I am going to go a little bit over the top I guess you could say and fill in all of
the wood grain and I'm going to be trying a new product it's called aqua coat it is a white cabinet
grain filler so it's going to help fill in all of the wood grain and then once it's dry you can sand
it back and prime again and it'll be a flawless finish so this is what it looks like inside of
there it's kind of similar to maybe like a wood fill or something like that but it's a lot more
malleable and easy to work with so I'm just going to use like a little scraper tool to apply it
and pretty much the entire drawer front has at least some type of wood grain so I'm just going
to go ahead and apply it kind of to the whole thing you want to work it in really well and I'm
going to go against the grain so that way it gets pushed down in there super good and then just kind
of fill in all the drawers all the sides of the nightstands and then after that we'll sand it and
see how it's looking in the past I've used things like the bondo glazing gel or putty and sometimes
that is just it hardens too much and it's really difficult to sand down and then it gums up the
sander etc and so I'm hoping that this product is not going to do any of that not going to gum up a
sander or anything but it's just going to go on really nice and then dry really nice and then sand
really nice this is the whole purpose of this exact product I'm hoping that it works the way
it's supposed to this is another perfect reason to tint the primer to be gray or something other
than white so that way we can see it getting pushed down into the wood grain as well this
drawer is finished so I'm going to set it aside and we're going to knock out all eight other
drawers and let this dry for a while the aqua coat has dried so it's time to go ahead and sand it down
and the goal is not to remove a lot of the primer of course but some of it probably will come off
depending on just the difficulty of sanding off the aqua coat I am going to use a see this is a
fine like a 180 to 220 sanding pad just so it's not too abrasive but also abrasive enough to get
that aqua coat off and the excess aqua coat off and then we'll do another coat of primer
to see if we need to do any additional filling it's time to give some paint on these night stands
I went ahead and actually did three total coats of the aqua coat it does say on the container
that it will take two to three coats to really fully get coverage of that wood grain but I think
it was pretty worth it I only showed you guys one round but the other two rounds were the exact same
where I just put the aqua coat on let it dry sanded it primed it and then I was able to see
you know which areas needed to continue to be filled and sanded so they're looking so smooth
no wood grain and the best part and the main part of why I wanted to do the aqua coat is because
of the hardware areas literally cannot see it which with those huge holes I feel like sometimes
it's inevitable to not get a little bit of flashing but there's nothing so I'm really
pleased with that aqua coat and how it just really allowed me to get that flawless finish
but paint paint paint we are going to use a color that I've never ever ever used not only
the actual color it is but like any shade of it nothing we are gonna go with coffee bean
from Dixie Bell and this is their chalk paint line I have a ton of it downstairs as you guys know
and I just figured why not do a little bit of a sophisticated a little bit unique color on these
so I'm going to go ahead and fill my paint sprayer with the with this I'm going to add a little bit
of water and of course I'm going to be putting the floetrol in I really like to put this stuff
in to just thin out the chalk paint a little bit more and allow it to really have time for
self-leveling so just mix it all in but always filter it through a little filter so that there's
no chunks that get into your actual paint can because the worst thing is having to stop spraying
figure out what's going on with your sprayer and empty it out clean it out unclog it it's not fun
at all I've had to do it before even with using a strainer and it's just better if you use a
strainer I decided to go ahead and do a little bit of sanding in between coats when I have a
rougher paint like a chalk paint and I want a really smooth finish I make sure to do as much
sanding in between coats as possible because that's what's going to lead us to the most
smooth flawless finish that doesn't feel like you're using a chalk paint which I like chalk
paint it applies really well it goes on really well and it looks really well but I like to take
those extra steps just to really elevate that end result so now before I do the last coat I wanted to
go ahead and drill hardware holes I've used this hardware jig several times it's okay like it gets
the job done but it's a little tricky to use and you still have to use a tape measure to get it
just right and plus it's only this long so like for this you would still need to figure out you
know how wide this is like it just doesn't go all the way across so I found that Craig has a XL
hardware jig that's a lot longer and it's going to fit across most drawers unless your drawers are
over 40 inches wide then this will work for you so I'm really excited this is my first time pulling
it out I got it all set up essentially you just do the midpoint and then you set your holes here
for how wide your hardware is and then you set these for how deep you or how like in the middle
you want your hardware up and down wise and then this last one you set it for how wide your drawer
is for half of that because these are going to essentially end up in the middle so with all of
those measurements you can line it up make sure that all of the spots you've measured are flush
against the sides and the tops and then you just go ahead and drill in your holes my hardware is
coming it's it's on the way it's hopefully going to be here today it's coming from Amazon
and it is six and a quarter inch so I'm not really able to test it when it's not here yet
to make sure that this is exactly right so kind of risking it in that business but I've got it
exactly at six and a quarter so I'm hoping that it's not going to be messed up if it is I'll just
have to you know fill and figure it out but we're going to go ahead and do it so I can get coat two
on I used a smaller drill bit so that I could fit it in here but I'll definitely need to go back
with a larger drill bit and get that like drill them a little bit wider so that the screws will
actually fit in there but one done and eight more to go
I've decided to go ahead and stain the bases and I'm going to do them all in the same color
we're going to go with barnwood from lily moon paint and unfortunately it sounds like lily moon
paint is shutting down but I will still be using it on the channel at least until I don't have any
more left to use so unfortunately you're probably not going to be able to get these paints anymore
and these stains but you know I want to go through my inventory so I'm going to apply this with a
brush and then wipe back any excess with my towels over here but this stuff is super easy to apply
it's water-based so that makes it you know that much better to apply and it dries really quick
and then on top of that it has a built-in top coat which I love so since this is a chalk paint
and it doesn't have the top coat built in it's important to put a couple of layers of top coat
over the top of it for ultra protection and I am going to be using the verithane satin color
or satin sheen the polyurethane water-based sometimes I add a little bit of extra paint to
it especially with darker colors sometimes I just do it as is I was going to do it as is just
plain top coat but I just want to make sure that there's no cloudiness that everything has really
great coverage so I decided that I am just going to take the spray can that I had the brown in
and I've gotten I've dumped out most of the extra but there's a little bit of remnants from
you know the actual painting paint being in here and I figured this would be perfect to just pour
in and then we'll mix it up a little bit also the trick to this is not getting too much top coat in
here to waste it because if once it's tinted it won't be able to be untinted or used for another
project so you kind of want to be careful with how much you put in there I feel like you can
always add more but you can't take it out so I'll probably just do maybe eight ounces to start and
then we'll go from there if I end up needing more then I can always add more later again we'll be
doing two coats at minimum so this should be ideal okay I'm ready to get these bases on the
bottoms of these we're just going to be attaching them directly to the bottoms and I'm going to be
using the pocket holes that I screwed or that I created when I was making the actual bases so I'll
show you exactly what you need to do when you are attaching new bases to the bottom so essentially
we're just taking the base and then lining it up with the sides and the front and making sure that
everything is nice and straight and even occasionally the base like one side may be may
want to kind of go out a little bit or even go in a little bit but you just need to pull it or push
it whichever direction and allow that to be screwed in with this the pocket hole screws
you may have noticed that I've only put paint on two of the nightstands originally I was going to
do them all three the same color for ease but I just decided to do a different color on the third
nightstand and that color is going to be midnight sky by Dixie Bell so I just think that the black
ish color is going to sell better as a single instead of the brown I am loving the brown as a
duo but I think like having one nightstand is already going to really narrow down the pool of
people that are interested in this type of thing and so I want to still widen it as wide as I can
with a more basic color or a more just neutral that kind of goes along with any type of decor
and it's not really narrowing it down too much as far as color goes we're going to get coat one
onto the nightstand and then let that dry until we do coat number two and in the meantime I'm
going to go ahead and put on the hardware on the other two nightstands kind of going
back and forth between my booth and the staging wall over there
and just like that these $10 nightstands have a completely new look and I think I really did a
good job making them completely unrecognizable like I would never imagine that these used to
look like file cabinets had the bases they did have the handles they had and just were
so dinged and damaged as they were I absolutely love the way that all three of these turned out
now the fun part let's talk about the numbers because I think it's really important if you're
doing this for profit to really hone in on the numbers and make sure that the things that you're
putting into each project is a good investment and a good turnaround for your end results
sometimes there will be projects that just maybe don't go as planned or you have really good
visions for them but they just kind of start adding up and adding up and maybe you spend a
little bit too much money we'll kind of make that determining factor on what you guys think about
how much I spent on these but let's go through all of the exact numbers and the costs of each
material that I used to create these amazing looks so as you know the nightstands were each
$10 so that's a $30 investment right up front which is really really important to get a low
buy-in so right there we're doing pretty good so far next I needed to fill in all of the damage
and bondo can be a little bit pricey so I always like to add it in and the amount that I used was
kind of a lot so we're going to count for about $10 worth of bondo and sandpaper again quite a
lot of sandpaper was used throughout this project for scuff sanding for sanding back the bondo for
sanding back the aqua coat each and every time all of that needs to be incorporated so $15 worth of
sandpaper aqua coat I bought that whole tub which was around $42 but I probably used about
a quarter of it or a third of it so $15 is what we're going to account for
primer I used $25 worth paint $50 worth top coat $20 worth the wood for the bases down below that
I got at Home Depot is $55 total then we have the drawer liners that I put in last minute because I
didn't love the insides of the drawers all those were about $25 the brand new hardware I used
nine of the 20 pack that I got for $55 so that is $25 and then the stain down below on the bases
was $5 worth then I always like to throw in just a little miscellaneous cost just in case I missed
something just to offset a tiny bit so we're going to do $10 on the miscellaneous that kind
of covers plastic and tape and again any of those things that maybe I forgot to account for because
it was so miniscule but still important to get the final number so that final number is $285
that I spent on this three set of nightstands I don't know is that too much to invest in a pair
and one nightstand we'll kind of see because I feel like these specific pieces are going to be
able to draw in a different crowd and maybe a higher end crowd because of the size of them and
then the overall luxury look that I gave them with all of these different aspects so with that being
said you're probably wondering how much am I going to be listing these for I have never sold a
pair of nightstands for over $465 I believe that's my max in my market for those size and those were
on the bigger side but these are pretty massive so I am going to be starting probably at about
$600 maybe $550 they they open and close really nicely the paint job is really good they're custom
so I think that I can probably pull in at least $550 for the pair and then for this guy right
here I'm really not sure I've never sold a single nightstand but I feel like it could also be
marketed as a small dresser or a side table or something like that like it doesn't necessarily
have to be a nightstand maybe someone just needs a little bit of extra storage I don't know I think
maybe I'll start around $200 $250 give me your thoughts down below I'm gonna go get these listed
on Facebook Marketplace if if you are interested in any of the products that I use in this video
be sure and check out the links in the description down below I always do my best to link everything
so you know exactly what I use and if you want to replicate it you can replicate it as to the
best of your ability with those products down below thank you all so much for watching I'll be
back next week with another flip that you're not gonna want to miss and I'll see you on the flip side
