The SIG SG550 has earned a reputation as one of the finest service rifles ever built. But after spending several days inside SIG Sauer AG in Switzerland, I finally understand why.
During this exclusive factory tour, SIG's engineers walked me through every stage of production—from barrel manufacturing and quality control to 300-meter accuracy testing, environmental testing, and military endurance trials.
We froze rifles to -40°C, heated them until the suppressors glowed red, dunked them in water, toured the production line, and saw first-hand why the SG550 has become one of the most respected military rifles ever made.
Huge thanks to everyone at SIG Sauer AG for their incredible hospitality and for allowing this level of access.
AI Generated·May contain errors
Video Summary
AI Generated
This video explores the production and rigorous quality assurance of the Sig 550 series at the Sig Sauer factory in Switzerland. It highlights a manufacturing philosophy that prioritizes extreme durability, precision, and 100% quality control over cost, ensuring the rifles perform reliably in the most demanding environments and maintain exceptional accuracy.
We're at Sig Sauer's factory in Switzerland looking at the Sig 550 series, which might be
one of the most reliable, most durable, most accurate, arguably best assault rifle of all time.
One of the ways that they ensure that it meets the standards of NATO, the AC-225 test, the Swiss
military, is in this climate control room that they have. It'll go from negative 60 degrees
all the way up to 70 degrees celsius. They told me it's going to be warm down there.
And address appropriately. So, let's go inside and see how this test goes.
Yeah, basically this is the climate chamber. Now, inside we have minus 29.8 degrees. So,
pretty close to the minus 30 degrees. It doesn't sound warm. I was told this is going to be warm.
We have inside a Sig 553. It's inside already. It's inside together with 556 ammunition.
How long has it been in there? For a usual test, you put it in for 12 hours at
target temperature that everything is free through and through.
A little nervous. Yeah, let's do this. Is anybody of you claustrophobic?
So, when I open the door, we go cold. Ready? No, but let's do it.
Oh my god. Oh my god. Oh, it's hard to breathe.
Okay, everyone ready? And that is what I call a cold bogey. Let's go walk around the factory
and you guys will see why this is arguably the best assault rifle ever made.
Do you know why this rifle was never copied all over the world? Nobody makes a copy of that.
Too expensive? Too difficult? Both. Even we have. We made for 40 years,
every day, the same as 35 years in the company. Every day we made the rifle. Every day. Sometimes
long, sometimes short, sometimes green, sometimes every color red. Pink. Yeah, every day. I will
not say to say we have every day a problem. We have every day a new challenge on this one.
If there are people out there watching that maybe have just seen the 550 series on TV
or video games or whatever, what is this gun? So, it's a standard Swiss army rifle
that is produced by SIG Sauer. It's in service since 1990. That's why Swiss soldiers call it
Assault Rifle 90. It's a long stroke gas piston system. Like the AK-47. Exactly. Basically the
same operating mechanism, just made by Swiss. It has some parts that are refined. You also see,
for example, difference in takedown. It's more similar to an AR-15. It's very robust. It's
throwing spears, lifting up people to the upper floor of a building.
They get abused a lot in the Swiss military and they still work. My appreciation is that 100% of
these are QC'd. Like every single rifle you turn up for the Swiss military is individually quality
controlled. Yes, we get the parts in. The parts get controlled. We build the rifles. Each rifle
is shot individually. No rifle leaves this factory without being test fired and fulfilled
some certain levels of accuracy. And also, yeah, it of course has to withstand the
proof rounds. So, with a higher load to test that the barrel is okay and that nothing happens.
Most military rifles are designed around cost, manufacturing speed or logistics. The SIG 550
wasn't. It's wholly impractical. It was designed to meet the Swiss army standards for reliability,
accuracy and durability, regardless of how difficult or expensive the rifle is to build.
So we are now here on our functional testing range. That's one of the ranges where we're
allowed to shoot up to 50 BMG and 40 millimeter grenades in here. And we just use it for
functional testing. It's just a mixture of sand and wooden for shooting in. Then we also have
the possibility to, here in the corner, to shoot 70 degrees upwards and 70 degrees downwards.
That's a requirement from the Swiss army that the rifle also has to shoot in the winter
70 degrees upwards and downwards. So we got basically the upper of a 553 300 Blackout
and the lower of the 560 series. The Swiss army tests the rifle at minus 30-35 degrees.
So that's what we just did. Yeah, that's the temperature you're experienced in there.
The weapon and ammunition gets placed in there. It's cooled down for 12 hours. Then the test cycle
starts. For the cold testing we do 100 rounds per rifle. Then we cool it down for an additional
two hours again. And then we repeat this six times. The temperature in the moment is
23 degrees Celsius. Similar like this. There are only two ranges on the world. One is owned by
Izhmash in Russia. Coldest, what I was shooting now, was minus 42 Celsius. And we can shoot minus
40 at the morning at 11 a.m. and at 2 p.m. in the afternoon we are able to go up to plus 40 degrees.
For cooling it down to minus 60 degrees we just need around about an Olympic swimming pool of
water and two days. Are you serious? Yes. Police unit, I think two years ago, I was selling them
P320 X-carries. They had the normal full-size, the classics. Then they changed to the X-carries.
And that's one of the police forces that is up in the mountains. Two weeks later they give me a call,
our pistols don't work. I said, that's not possible. Because it was directly in January
and they had minus 22 degrees outside. I said, it's not a pistol. They were sending us the pistol.
I said, hey, you forgot one big point. You said, what? I said, send us the ammunition.
Then they were sending us the ammunition. Two different ammunition, from each ammunition two
lots. Yes, it was not a pistol. It was the ammo. Hot temperature is done by 60 degrees. I don't
know exactly in Fahrenheit, but it's basically the same procedure. Our climate chamber can do
more than 60 degrees as 70 degrees plus, but it's limited there for security reasons, for the
employee safety. So this is a good thing. But it's different when you go to a sauna as a private
individual, there you can go 90 degrees or more, nobody cares. But if you do it here, you do it in
the workplace, all of a sudden it's a problem. Yes, so you should handle it around, let the gun get hot
to 60 degrees again for two hours, and then you repeat the cycle six times. Yeah, they actually
call this test the Zermatt to Florida test. Good? Yep. Oh wow. All right, who's gonna, who's doing
the depth? You are. You? Really? Yeah. All right, here we go. All right, Patrick, you ready? I need the light on. Yeah, turn the light.
All right, yep. Going completely into the magwell. Yeah. Oh my god. Now we can pull it out.
And again. And again. Now we can just hang it here. We shot that, it got so hot I couldn't even
touch the magwell. We dunked it in the the dunk tank here, and I could actually feel the tank
vibrating, like it was so hot from dunking it in there. Why do this? What's the point? To stress
test the rifle. So we just shot as fast as we could. The silencer got glowing red hot as you
saw it. Then to cool the rifle off, we just put it in the water tank. You saw the water evaporate.
We hang the rifle, shoot the second rifle during the time it dries up a bit, and then we start all
over again. It's usually always 100 rounds per rifle. You do one 20 round magazine single shot,
then you do one with three round burst, one full auto, then three round burst again, and then one
full auto again. Then you dunk it? Yeah, we do that usually until we get a thousand rounds per rifle,
and then it gets disassembled, checked by quality inspection in-house, so we can assure all the
parts are in spec, and then reassembled, and then yeah, the cycle continues. How well do they take
this kind of abuse? That's no problem. We shot this one now I think 30,000 rounds through it.
It's still working, and all couple hundred rounds we dip it in the water, absolutely no problem.
Yeah, this rifle was filthy. God, it's still a little warm. Yeah, this rifle was absolutely filthy
whenever we came down here. Why do you think, as an engineer, why do you think that is? Why is it that
this rifle can handle that sort of abuse? Because it was built for that. From ground up it was built
to handle these specifications, especially the cold weather was always an issue. It was
clear from the beginning that it has to handle that, and yeah, it still works. Okay, so this is
a drop tester for rifles with an electronic magnet, and believe it or not, this little spot
of concrete here is certified by Swiss Army. No joke. No joke. So I think they even specify the
mixture of concrete when we have to replace this. That's the maximum what is allowed to happen.
It's not allowed to fire. To understand why the SIG 550 survives SIG's insanely extreme
testing, you have to look at how it's made, and then it all makes sense. So welcome into here. We
are here in the moment on our site where we are doing the assembly. We have three assembly lines.
On the first one you see here directly, we're doing the lower receiver, then we are doing barrels,
and then we are doing the upper receiver. The biggest point in here is every one of our workers
can do every position, so we don't have to take care about if one is ill or one is on vacation.
Everyone is possible to do every step. Every barrel that we produce is 100 percent
quality controlled. To make sure I understand, you just said that your barrels are 100 percent
quality control. You test every single barrel? Yes. Holy ----. Every rifle that is sold by us,
what we're giving out, is 100 percent quality control. So these are two position and our three
position drilling machines, where we drill the gas port. Also for us, for example, on the
installation of the gas block, we just do the gas block installation first, and then we drill the
gas hole through the gas block in the barrel. So it's every time the alignment is 100 percent.
For example, that would be a blank. Then we are deep drilling it. This is then the finished
hammer out of the finished barrel blank. After that, they are hardened and then they get also
black. And the last step is here to grind by rotation grinding the seat for the for the gas
block. Our rifle is so big quality as our barrel steel. You can shoot 300 blackout through a 5.56
without killing the barrel of the rifle. We also still have barrel bending machines in-house.
I can show it to you. We show it directly in the front in the service area. If a rifle drops
and it has a bent barrel, we can restraighten it. There are only a handful of people still
being able to do this in the world, I would say. Eight people, eight people who are still able to
do this. Take a look through it, and then they take a look at the shadow. And then they take this
on the spot, they mark the spot, put it in here, and then they really twist, massage this bend
for the whole, I would say, length of the barrel. Oh god, please tell me that that barrel is like
just your demo. This is demo, this is demo. So these are all barrel blanks here. There we have
7.62 to 39 with semi spec. Our 300 Whisper CIP barrel. We also have semi barrels. What we found
out in our action, mostly the semi works better. We don't know why. There's a mysterium for us.
That is so weird. What do you mean works better? Accuracy. Shut up. Yeah, but the CIP barrel is
really, really accurate, but the semi is a thousandth more. We don't know why.
You will only see it if you test it on a machine. And they don't know why.
Only if you test it on a machine. Firing prone or on shoulder,
we didn't see any difference. No difference, but it's only mechanical accuracy, but it's still,
it's consistent. Yes. Wow. So here we are in our quality inspection. Everything is 100% inspected.
Oh wow. Yes. We even have more. We have about 8,000 gauges in the company. 8,000 gauges.
There are no difference in the rifles between the army rifle and the sporting rifle, only that the
sporting rifle is directly a semi-automatic. It gets the same quality inspection as the army
rifles, also 100%. For example, when we changed to the new charging handle, the monolithic one
for the army, from the first batch, Heiko and his team inspected 30,000 charging handles by hand.
100%. This is just for the bolt handle catch, right? To check if this is inspected. If it fits
in here, it fits into any bolt carrier of the 5.5x series, but it is inspected. So for example,
what he's now putting in, it's the reference part, because that's what's called a Muster
QS and all is measured with go and no go. What part is almost never wrong? Less than a half
percent or lower than 0.005% what is not okay. One of our other co-workers is doing a 100%
inspection of the trigger bar, the 550. One thing is with checking parts for the Swiss army,
they have like a color shade. They see one piece which is not in their color spectrum of
certain shades of gray and certain shades of green, they say no.
By now, one thing should be obvious to you. Nothing inside this factory exists to make production
faster or easier. Nearly every process exists to make the rifle more consistent. And speaking of
consistency, let's see if all that precision gets us any payoff on the range. So here that's one of
our 100 meter ranges. That is one of the devices we use for accuracy testing of the assault rifle
90 system. And these ones are also still as old as the assault rifle 90 by itself. We have six of
them and we do annually change them to all the positions and then it's every time it's got
refurbished, cleaned, new lubrication and working. And also here with the new machine we can
measure the impacts at one of a tenth of a mil. And also all together the complete wires that
you are seeing here with the table, the weight is around about 600 pounds. Welcome to the 300 meter
range. We have here the same wires to fix the rifles and here we are doing the most testing
of the rifles on 300 meters for the Swiss assault rifle 90. Swiss assault rifle from us, the P550,
is able to do on 300 meters with surplus ammunition that we see here on the wall. That is original
size. This here is in theory a five centimeter grouping. So on a Swiss ordnance, no, Swiss
federal shooting target basically, this circle here has 11 centimeters and it will be the 10 points
hole basically, the bullseye. So this is what we have to get and in most perfect ways you get a
five centimeter group like this. The 11? We have to get the 11. So this translates to roughly sub MOA
on 300. So wait, five centimeters, so five centimeter group, what in inches? Two inches.
Yeah, two inches. Around two inches. So that, yeah, yeah, two thirds. Yeah, yeah, 0.6 MOA
with surplus ammo. Yes, but if you use target ammunition like Swiss P,
half it. No way. Yes, yes. We have to shoot 10 rounds. You have to shoot 10? We have to.
Five is not acceptable. We have to shoot 10 rounds. Okay, so HP, you test them when they're
new and if you rebarrel for a customer, you also accuracy test. Every time. That's awesome. Yeah.
So this is like a reference rifle he's shooting now. We use this to see if the ammo is good
and just to have a reference because we know this rifle, what this rifle is capable of.
The barrel is Norwegian. So it's 30 years old. 30 years old? Yeah, point. So this means when you
on the 10, what do we say that? 10 ring? On the 10 ring. Yeah, I would say everyone you have 10.
Perfect. Perfect. Bravo. Perfect. Yeah.
The shooters are dying, but the rifle never.
That's the old K31 action that we modified with another thread inside that we can directly put
assault rifle 90 barrels in it to just shoot the barrel. So if it goes on that a customer
is really coming, is that my rifle is ----, my rifle is ----, my rifle is ----.
Mostly if it's not so, we can say, okay, we test every spec on its own. Testing only the barrel,
testing only housings, all is possible. We never lost the game.
Because the SIG 550 rifle itself is so durable, it often outlives its owner,
meaning that barrel changes are pretty common at SIG. Every now and then they'll get a customer
service complaint about accuracy though. But as you can imagine, more often than not,
perception is different than reality. Tell the story of the elderly fellow you had here.
It was my first year here. There was a guy, I think he was round about 82. He said after changing
his barrel, the rifle was shooting far away and was no more on the target. And we said, okay,
come to us. We will check it with you. We didn't find any mistake. Then we go down to shooting.
Then the first group was 99.6. And then he told us, okay, maybe it's the problem of his eyes
because his eyes were getting worse and worse. And then he told us he has only 20%
of possibility to see. It was probably the rifle though. Yeah. In Germany,
we say when the farmer is not able to swim, it's the bath trouser. Then it's very, very sad that
if the people don't clean their barrels accurately, they send it in, tell us, yeah, it doesn't hit
anymore. It doesn't shoot accurate anymore. This rifle, for example, could have been saved from a
new barrel, which is not that inexpensive. If you just would have cleaned it properly.
When we deliver rifles, we don't deliver the rifles with the printed accuracy. Two friends
are buying a rifle. The one get a 99.1, the other one get a 99.2. And then, oh yeah, now I know why
are you better than me because you have the 99.2. Then we stopped. And even we got inquiries why the
Yeah. And everybody knows it's a laboratory. It's another day. It's another wind. It's another lot
of ammunition. But I bought a rifle with this shooting picture. I want to have that. Yes. Thank
you. That's out of the machine. That what the rifle is capable to do. I don't know if you are
capable to do that. So you are driving a 99.1? A 99.3. Okay. The 99.3 is able to do the
in nine minutes. Yes. The car is able to do that. Me not. Right. I do it in seven and a half.
Tell me about why we have furniture pads here at the 300 meter range. Yeah. Basically,
we put them on the rifle here in the area where the brass hits the upper receiver.
And this is because a lot of customers want to have the rifle like brand new as a showpiece
so that you don't see the eject brass marks that occur during firing. So this is,
as you can see, a rifle that already had several thousand rounds on the counter. You used to not
use the furniture pads. And people would complain whenever you would rebarrel the rifle or whatever
that that it would get dinged up. So you start using the furniture pads. And then what happened?
Yes, at some point in the past, it was switched. And then with the furniture pads,
some users complained that we don't fire the rifle at the factory. So they receive untested
rifles, which is absolutely not true, was never true. So they're still complaining. So you take
the pads off. Then we took the pads away. And then we had again, customers that complained
that, yeah, that you see the visible marks. And now we are at the point where most customers are
demanding a rifle like new without marks. But this was a process which was going on
over 20 years. So trends are shifting. Right, we're in a right now a pad cycle,
furniture pad cycle, and eventually we're going to work our way out of a furniture pad cycle,
and so on so forth. We will see. We have many years to come. I thought US customers were bad,
but I guess the Swiss might be worse. Before I visited the factory, I thought the SIG 550's
reputation might mostly have been built on mythology or gun forum legend. But after seeing
how these rifles are manufactured, inspected and tested, clearly the 550 is the most Swiss
thing ever. A dedication to perfection without compromise, 100% quality control and decades
of experience means that this rifle might be the greatest assault rifle ever made. Thanks for
coming along with TFB TV and stay tuned because we've got more videos coming from SIG Switzerland.
Take care.