I turned an old van into a 2-STORY tiny house

Tuning Pro
54 followers
#GJWcars #GJWauto #Customizingcar #tuningcar #howto #DIY #CarCustomization #upgradecars #editcar #wrapping #bodybuilding #bodycar
AI Generated·May contain errors
In this video we're turning this creepy old van
into a beautiful two-story tiny home. So hold on to that food, sit down if you're showering,
and let's get started. Like usual, this video started when I was scrolling on Facebook
Marketplace and I came across this old van. We got a van! We got a van! We got a van!
And while yes, it looks very creepy, it was a heavy-duty E350 with 130,000 miles
and only cost us $5,000. First thing we gotta do, get these seats out of here.
Under the carpet it also had this mysterious wood floor.
Once we got that up, we figured out why we got the van for so cheap.
The floor is falling out and I can see the tire.
Rust. Rust. More rust. Rust.
This van had a bit of a rust problem. There were holes everywhere. For a while we thought
this project was over before it even started, but luckily underneath the van was still okay.
So, we patched the holes with aluminum. This problem definitely won't re-emerge later in
the video. Obviously it's a pretty big space in here, but there's one problem. We can't stand up.
Cutting the roof off is the logical solution, right? Our idea for this van was to raise the
roof where the floor plan works. You see this picture of Koi standing by the van?
We're raising the roof to the top of that measuring tape. This will give us
just enough room to stand up on the bottom floor and sleep on the top floor.
You might think at this point we knew what to do and this was going to be easy,
but we were completely winging it. In fact, we were all a little freaked out because there's
obviously no going back from this. So, we made this wooden piece that kind of looked like a roof.
Wow, that actually looks really cool. That way we had a shape that we could copy with metal.
Once this thing was all welded together, this is what it looked like.
I made three of them. These are kind of like the trusses that are going to hold up the entire roof
and help make the shape right. Then because we want it to be aerodynamic and not look too
ridiculous, we put a small one at the very front. Then I started welding bars to everything,
which leads me into my next segment, cool welding shots.
As you can see after all that welding, it's pretty solid. The next step was the really hard part
though. We had to figure out how to cover this in metal. This is really hard for us because we wanted
it to look like this roof was part of the van and not just something we added on. So, to make sure
it's as smooth as possible in the end, we used steel sheets where I could weld them on from the
back. Then we carefully bent the edges where we could get nice round corners and as I welded it
on from the inside, we just cut the excess off. The side sheets were super fun because they're
easy to put up and here's a better look as to how I welded all these sheets together.
Just like that. I did hundreds of these little dots and definitely burnt myself a couple times.
Other than that though, the metal went pretty smooth, even the front which was especially
difficult. But what's crazy is once we got this thing all covered up, it actually looked decent.
Solid six out of ten. Really? All that work for six? But we weren't done yet. See all the cracks
and holes and corners that need covered up? Well, my dad went through and covered the welds with bondo
and the corners and cracks with fiberglass. We're also keeping track of how much this van weighs.
At the beginning, we took it to the cat scale and it weighed 6,280 pounds.
We're going to try and keep it as light as possible, so we'll be weighing it again at the end.
I'm really glad this front end's strong. What's crazy is after this, the outside of the van looked
pretty good, but the inside was even crazier. Dude, it's huge in here. Massive. Wow. Nine feet.
Nine foot ceilings in a van. That's pretty crazy. That's so cool. With the inside of the van huge now,
it was time to actually start turning it into an RV. It is time.
Say it. It's time. No. Say it's time for the floor. It's time for the floor. No, no, no. I'm going to say it.
Four times. We obviously wanted as much ceiling height as possible, so we cut two by fours in
half and attached them with metal self-tapping screws. Then, we had the super satisfying job
of sealing the floor slash insulating with spray foam. So mesmerizing. Spray foam was great because
it will keep out the water from all these holes we had, and it will make the floor a lot stronger.
After that, we put down some three-quarter inch plywood.
It took the floor from looking like this to this,
which led us to our next step, the walls. Unfortunately, we had to leave this rim of metal
because it was pretty much the structure to the van. But luckily, the van was so big that losing
this extra space didn't really affect us too bad. Can I also point out how cool it is that we have
to use a ladder in this van now? All right, now for the really fun part. We're going to put in
the second story. Look at that. That's going to be the bedroom. Oh, no way. Yes, yes. Whoa.
How is it? I'm like two feet above the original van, dude. Wow. It's so cool. The last thing we
had to frame was in the back. We started by building a wall in front of the two back doors.
This will kind of be our garage. And then we put another wall up to frame in the bathroom. Yes,
this van is going to have a full bathroom. And with all the framing done, some of you might
know what we're going to do next. Okay, it's time to get serious. It's electric time. Remember how
I said the back of the van is going to be kind of like our garage? Well, that's where we're putting
the breaker box. Electric time. That box is where all of these wires are going to run back to.
All right. All this has got to plug into something. That's what this is for.
Back at the breaker box, it was finally time for my dad to connect everything. Just because
I look cool in these glasses doesn't mean I know what I'm doing. He's good at this. He knows what
he's doing. After we installed all the wires, it was finally time to cool this van off a little bit
by installing our mini split. It's so small. For those of you who might not know, this is just an
AC that cools and heats. And what's crazy is we got this unit for $380 off Timu, who sponsored
this video and sent us all kinds of cool stuff for this van. We got a bunch of camping stuff too,
like this fold-out chair, super bright flashlight, and this nice big water bottle. Back in the van,
what you're looking at now is the front, hence the seats. And we installed the mini split right
above them where it blew towards the back of the van, cooling the whole thing off. And you see those
white pipes? Well, those are the copper tubes that connect the inside of the mini split to the
outside portion. Once I connected those and we vacuumed them out, I turned it on to test it.
It's working! It's on! It's working! We got AC! All right, now we're going to install these solar
panels that we got from Timu. Timu is also doing an insane promotion right now where you can get
3 to 10 items for $0. All you have to do is go on Timu and type Che026 in the search bar,
and you have a huge selection of items you can get for free. After ordering the solar panels,
which we're now attaching to the van... It's perfect! What? I mean, we deserve some kind of
award for that. That's crazy. I actually tested my own code out to see if I could get the free items,
and I got this inflatable beanbag, this cool table, this fan pedal cleaner, and at the end,
I bought this ice maker for 25% off. So go use my code Che026 in the search bar or click the link
in my description, get those $0 gifts, and thank you to Timu for sponsoring this video.
While my dad was putting in all the plugs, switches, and even the bathroom vent,
I had one last thing to do on the outside... running lights. This made the outside look so
official. Look at the top of the van! That is sick! It looks like an RV! And we added this brake light.
Oh, it's perfect! And now the inside was completely done, which means we were ready
for spray foam. Me and my dad were really not wanting to do this,
and I was prepared to argue. I really was. But somehow, Colby just wants to do it.
Hey, look! He's all excited! Yeah, Colby volunteered, so we're off the hook. You ready,
man? Oh yeah! In case you haven't figured it out by now, spray foaming is a really messy job,
but it's great for RVs like this because it locks all the wires in place, it's waterproof,
and it's really good at insulating. I didn't realize this until watching this video,
but Colby went back like two or three times on the roof, and it ended up looking pretty crazy.
All right, dad. Well, we didn't spray, so now we got to pay the price. Yeah.
I think we're done. With the extra foam out of the way, we could finally start putting sheets
in this van. Yank it like a tanker. I'm sure you can tell by the look on my face, it wasn't very
easy. God, it's cold! And as I was putting this up, I may have broke it. It's cracked. Yeah,
we need to soak it. Yeah. The curve on the ceiling was pretty small, so the only way
to make these sheets bend right was to soak them in the pool for about an hour. Look how flexible
that is. Dude, it looks like a piece of paper. I know! With the sheets bendy, we could get them up
in the ceiling without breaking them, but it was still a struggle. Here, let me speed it up for you.
It looks sick, dude. It does look cool. Then we just did that a couple more times. I should
probably play some music now. Nah, just watch in silence. Okay, then we put on the main living room
kitchen ceiling, which was great because I really wanted to get some can lights in here where it
wasn't so dark. All right! Finally! It's funny, that time I was going to be putting the lights in
took 53 minutes, but let's see if they work. Oh! Multiple layers. Bathroom ceiling time.
The bathroom was the last room to get can lights, and you can tell I was pretty excited they worked.
After that though, I finally started sheeting off the bathroom, and for the first time,
you can't see those doors anymore. Back in the living room kitchen area, we started sheeting
that too. And look how big this room is. Isn't it crazy that this is a van? Oh, and behind the
camera, Colby did a great job covering this super hard section. What's crazy is this time lapse is
three hours long, but look how good this space looks now. It just needed one thing. I'm gonna
build some cabinets today. On this channel, Colby's become a little bit of a celebrity because of all
the cabinets he builds, and this video is going to be no different. My measurements have changed
because I changed the face frame from two inch to one and three quarters, so now everything is
different. Anyway, while Colby was working on cabinets, it was time for me to get under the van
where I could start installing the tanks. I just had to remove the old spare tire first.
Almost lost my arm. Welcome to under the van. Right now, I'm scraping off most of that rust
where I can get to the bare metal. That way I can weld on mounts for this tank. In case you don't
know, every RV needs three tanks. A black tank, gray tank, and fresh water tank. The black tank's where
the toilet water goes, gray tank's where the sink and shower water go, and fresh tank is obviously
where the fresh water goes. And under this van, I had so little room that our toilet actually
wouldn't fit here, so we had to reframe the entire wall to scoot it back a couple inches all the way
where I could put this pipe in. It fits! We did it! Now that drain pipe fits in the right spot,
I could actually go ahead and make my mounts for the tank. I just kind of welded these ribs to the
frame where the tank could fit in between them. Then I went and made the hole for the toilet,
and now you can see why we had to move it back because that frame was in the way.
And while I was decking out the black tank with all kinds of vents, inlets, and even a gauge where
I could know how full it gets, this is a decked out tank. Colby had gotten all of his wood cut and
was now assembling the cabinets, which really didn't take him that long. All done. How did you
finish them that fast dude? But then all this progress stopped when I accidentally touched a
brake line. You see that dad? Oh, oh no. That's brake fluid. No. Yeah, remember how rusty this van was?
Well, the brake lines were completely rusted through. I don't know anything about brake lines.
This is going to be a whole new thing for me. Just in case you don't understand how sketchy this is,
that brake fluid leaking out literally means the brakes don't work. My first thought was the van
was completely totaled and we wasted all of our money, and I was pretty upset. But then I realized
how we got done with this, and I took it on a trip. The brakes probably would have failed. Well,
I got the old brake line out, so I watched like a bunch of YouTube videos and got some stuff on
Amazon that will hopefully fix it when it comes in. For now, I just pretended to ignore it where
I could focus on my tanks. On the exact opposite side, I put in the gray tank. This was directly
underneath the shower. All right, so the shower drain can only go in one spot right there. Because
of all the big metal framing in the way underneath the van, I had to make this crazy looking pipe
that routed all the water to the tank. Down this pipe, and it goes up and over through the frame
into this. It goes directly into the top of the tank. And I have to admit, I'm pretty proud of
that. Then there was a fresh tank. This is going to give the van access to water anywhere, and I
put it right where the old spare tire went. All right, I know this looks horrible, but nobody's
going to see it. I don't care, so I'm done. Back on the inside, Colby and my dad were working on
trim to cover up all the ugly gaps, and man, it was looking good. Remember, just a couple of days
ago, it looked like this. Anyway, while I was still trapped under the van doing plumbing,
what? Colby was working on his cabinet doors. This is a lot less than I usually have, so I'm
pretty happy with this. And while he was putting all those doors together, my dad gave the van a
paint job. This made it look pretty insane, but one room that hadn't gotten any attention,
the bathroom. You probably know this by now, but we're going to put a toilet and a shower in here,
and this might be a little crazy, but it's all going to be tile. First though, my dad had to
put down the shower pan and make sure everything was waterproof. And if you're wondering where
I've been for the last couple minutes, still plumbing. While my dad was waiting for me to
finish under the van though, he put a layer of primer on the cabinet doors and the cabinets
themselves. You never know what you're going to get when you spray. Could be good, could be bad,
easy, hard, whatever. Never know. Hopefully this goes well. Jake can delete all this crap.
Oh my gosh. All right, so we're going to prime the cabinets now.
By this time, I finally wrapped up the plumbing underneath the van, and let me just say,
it looked good. All right, dad, you ready to tile the bathroom? Yes. Me and my dad then
joined forces to tile the bathroom. He may have done most of the tiling, but I was outside
cutting things for him. Meanwhile, Colby was turning scrap wood into crown molding.
This piece costs like six bucks at Lowe's, and Colby just made it for free with a router. After
he put it up on the cabinets, we were finally able to paint them. Then we could get to something
really exciting, this countertop that weighed like 200 pounds. Oh boy, look at that. Wow, guys.
Me and Colby picked this countertop up from a local home goods store for like 300 bucks.
It was a lot, but man, it was worth it. All right, dude. Also, huge shout out to my dad for getting
under there and cutting it. He looks like Mike from Dirty Jobs. Anyway, while my dad was doing
the backsplash, I was finally cutting the carpet that went upstairs and in the cab.
Some people hate on me for loving carpet so much, but look how cozy the upstairs looks now,
and the cab used to look like this. Now it looks like an RV cab. With all this stuff we've added
to the van, some of you are probably wondering about weight, and we are going to weigh this when
we're done and show you, but we definitely didn't want it looking like this going down the road
because it's so heavy in the back. To make it not do that, we're putting in airbags. I bought this
5,000 pound airbag kit specifically made for this van, and as you can see in this time lapse,
they went in super easy, and when I let down the van, you can see how much it squats,
but then when I pump up the airbags, watch this.
With each pump, you can see the van lifting up. It goes up a lot.
And by the way, my parts for the brakes finally came in, because remember, they still don't work.
So in case this ever happens to you, first locate the master cylinder. Remove rear brake line. Don't
accidentally remove the front ones. Go into the van. In the back, cut old brake lines with grinder.
This is good. Get new brake line. Cut it. Good. Flare brake line. Not like that. Like this.
$70 tool needed. Oh, don't forget nut. Don't forget nut. Good. Go back to master cylinder.
Connect new brake line. Take brake line to the back. Connect brake line to brake line block.
Connect other new brake line to brake line block. Bleed brakes. Both. Test brakes. Good.
Now go open up a brake shop. Back inside the van, there were only a couple things left to
do before I could take this camping. The main one being the floor. I wanted it to look fancy,
so I chose this really shiny tile that kind of matched the countertop. I think it turned out
really, really good. Meanwhile, Colby installed his custom glass cabinet doors.
You guys want to see something cool? Isn't that just awesome? By the way, you guys remember that
old spare tire that tried to kill me? Well, we cleaned it off and got a new tire for it,
and then made a bracket to go on the back of the van where it looks like this. Dude, look at that.
I also transformed the rest of the wheels from this to this. Kind of crazy what tires and a
little bit of spray paint will do. So far, we've turned this old creepy van into something really
cool. But, although I don't think it looks creepy anymore, it doesn't look good either.
So, I'm going to cue my dramatic music that I usually do while we get this thing finished.
We're done painting. This van looks awesome. I'm just kidding. We're not going to leave it this
turd brown. And while my dad was painting, I was inside hooking up this new battery for the
off-grid system. This is going to give the van power anywhere. I also made it to where this
battery charges while the engine's running and hooked up the solar panels so they're charging
it too. Then, I added a gauge for the black tank and one to tell me exactly what this electrical
system is doing. All right, I have the van on and nothing's blown up yet. So, I think it's working.
Back outside, the green paint was looking amazing. Then, it was just some last minute
final touches that really sent this van over the edge. All right, you ready guys? Let's test this
thing out. The campsite we are going to is about an hour away, so we're going to get a really good
test for this van. But, the first thing we're going to do is figure out how much does this van weigh
now because we don't want it to be too heavy. What do you guys think the weight is? I'm thinking
about 9,000 pounds. I think if we were below 10, I'd be happy. Remember, the original weight of the
van was 6,280 pounds. And now? 8580. What? Oh my gosh. 8,580 pounds means we only added
2,300 pounds to the van. We killed it. That was only 2,000 pounds. It was really cool to stand up and
walk around too because all of our stuff worked. We got power. Plenty of power. All the lights work.
The water works. I even went back inside the bathroom to test the shower out. I got the
shower on. What? Anyway, it wasn't long until we got to our campsite and I just honestly can't
believe how cool this van looks. What used to be an old creepy van, we are now making dinner inside
This is about to be so good. Oh wow. And don't forget, there is a bathroom in the back.
Great success. Alright, we got Colby in the passenger seat. My dad's up here. I am taking
the floor. Thank you guys so much for watching. I'm going to bed and I'll see you in the next video.
