Ant Design Zen - The Best Modular Multitool

SilkRoad Technology
124 followers
#technology #highend #gadget #robot #apple #iphone #macbookpro #gaming #accessories #gears #samsung #tesla
AI Generated·May contain errors
Everyone thinks the Roxxon Flex Companion is the best pocket-sized modular multi-tool
on the market today, but I think this one from Ant Design is actually better.
And in this video, I'm going to explain why.
And as always, I'll provide links to everything shown in the description down below.
Now, modular multi-tools are the ones where you can add and remove the tools
and easily swap them about in just a few seconds,
so that you can create the perfect multi-tool for your specific needs
and change it whenever you want.
And particularly when it comes to a Swiss Army knife-sized multi-tool
with its more limited tool set aimed at everyday carry,
the modular option makes perfect sense.
And what I have to show you in this video is the market leader
in this category alongside the new kid on the block.
The market leader is Roxxon, their Flex Companion launched in late 2024,
shortly followed by its smaller brother, the Mini Flex Companion.
And the new kid on the block appearing in early 2026,
the Zen from the much less well-known maker Ant Design.
And this is actually their first ever multi-tool,
although we have featured several everyday carry items from them in the past.
And what I really love about these tools is that I can swap out the locking blade
with another tool in an instant,
making this legal to carry in countries like the UK
with more restrictive knife laws.
And in here, I still have the option of a blade edge reamer
or seatbelt cutter or package opener,
which can, in some cases, replace the need for a knife
without actually being one.
Okay, first let's have a look at the Flex Companion.
We have here a steel frame with G10 scales,
which come in a range of six colors.
There are five tool slots available and a quarter inch bit driver.
And we have a sprung steel pocket clip.
It weighs 130 grams in the supplied configuration,
which I'll come back to,
and is 90 millimeters in length and 24 millimeters wide.
The Mini Flex Companion, as you can see here, is a lot smaller.
Again, we have a steel frame and G10 scales,
but this time only available in black.
There are four tool slots here and a smaller four millimeter bit driver
and the same style of pocket clip.
And this one weighs 84 grams as supplied
and is 77 millimeters in length and 19 millimeters wide.
The size difference between the two is pretty significant.
Although, interestingly, the thickness is quite similar
at 17 millimeters for the Flex and 15 millimeters for the Flex Mini.
Now let's look at the Zen,
and this time there are three scale material choices.
Steel, steel and black G10, which is my favorite,
and titanium.
And there are five tool slots here and a quarter inch bit driver,
like with the larger Flex,
and also a pocket clip,
which in this case is more like the one Leatherman use,
making it more substantial and more belt friendly,
as it can be moved sideways on a belt without it detaching.
Also, the belt clip can be removed and swapped to the opposite side if preferred.
The weight with the supplied tool configuration varies
depending on the material choice.
93 grams for the titanium,
100 grams for the steel,
and 106 grams for the steel plus G10.
And the length is 19 millimeters,
the same as the Flex.
And the thickness at 16 millimeters sits between the Flex and the Flex Mini,
or a couple of millimeters more with the G10 scale option.
But, and this is where it gets interesting,
the scale width of the Zen is actually the slimmest here,
slimmer even than the Flex Mini.
And that to me is a big deal and strikes the perfect balance.
The longer length means you can use the more effective longer tools,
like a knife or a saw or a file,
and then you also have the benefit of the smaller size and weight,
which is super important when it comes to everyday carry.
In fact, the dimensions of the Zen are very similar to a three layer
Victorinox Swiss Army knife.
So, more practical than the Flex Mini,
but a lot smaller and lighter than the Flex.
And just before we get into the tool comparison,
I wanted to give a quick shout out to our friends at Arcade,
who have just added the brand new Adventure Mag Belt to their range.
And Arcade are the sponsor of this video.
Now, the Adventure Mag Belt was designed with travel and outdoor adventures in mind,
but I find it also fits perfectly into everyday life and daily wear.
And the Adventure Mag introduces a couple of brand new features from Arcade,
starting with their new SwiftLock magnetic buckle.
And this uses embedded magnets, which make it easy to fasten
and unfasten the belt in just a couple of seconds,
and it can easily be done with just one hand.
It locks into place with a satisfying snap,
creating a tension lock, which can only be released
when the two halves are pushed together,
making this Arcade's highest tensile strength fastening
and overall toughest buckle to date.
And the second new feature of the Adventure Mag
is a new abrasion-resistant Performance Stretch Pro webbing.
It still uses the reprieve recycled materials we've seen before,
but the Pro has a higher denier weave for a sturdier feel
and a lighter stretch to cope with more active movement.
And it works really well.
Avoiding that problem you often find with a traditional belt,
which is either too loose or uncomfortably tight,
and which can vary throughout the day.
This stretch webbing adapts to changes,
maintaining a comfortable tension,
which can be fine-tuned thanks to a micro-adjustable buckle.
And you'll also notice any excess belt length
is hidden away on the inside of the belt.
And I really like these vertical ridges we see with the new Pro webbing,
which sets it apart from my other Arcade belts.
This is the only belt I plan to travel with on my next trip,
as it works with just about any clothing.
But if you do need to pack more than one belt,
then it's worth noting that this one falls at really small
and weighs only 80 grams or 2.8 ounces,
which for those traveling fast and light is a real bonus.
So to find out more and check out prices and the various colour options,
this one is navy by the way,
then just follow the link in the description down below.
The Flex has a quarter-inch bit driver,
which is opened using a fingernail and locks with a liner lock.
It has a mirror-polished finish, as do all the Roxxon tools,
and it does work well with the bit held in place with a magnet.
However, the liner lock spring takes up a lot of space in here
and this design no doubt contributes to the wider profile of this multi-tool.
The Flex Mini is the same but smaller
and that means we have that smaller 4mm bit driver in here.
And that's fine,
but it's just not as good as the full-fat quarter-inch driver
when it comes to bit choice and capability.
The Zen takes a different approach.
It's a quarter-inch driver with a magnetic bit retainer,
but it uses a button lock mechanism
and that brings with it a couple of advantages.
Firstly, it is a much more compact arrangement
as you don't need that long leaf spring,
reducing the overall width of the multi-tool.
And secondly, it allows for a 90 degree lock
for using small spaces or when more leverage is needed.
It also feels more precision in use
and as you can see when we get close up
and compare the Zen and the Flex side-by-side,
the quality is a step up with the Zen when compared with the Roxxon.
Then if we look at the main tool set,
starting with the operation,
the Flex and the Flex Mini work in exactly the same way.
Both have this slide lock
and you can't open or close any tool unless this is unlocked.
And whilst I don't recall seeing a lock like this on any other multi-tool,
it does serve a purpose here as a jolt can deploy the tools
on both the Flex and the Flex Mini when it is unlocked.
And that does not happen with the Zen
or other multi-tools I've tried for that matter.
And the screws in these tools are in no way loose.
The main blade can be opened single-handedly on all these tools,
although it's worth noting that the forward position of the thumb stud or grip
can get in the way when using the knife,
especially with the Zen and the Flex Mini.
Once open, the blade locks into place as do all the tools.
The Flex uses this spring-loaded button to unlock the blade
by pushing it back against the tension
and this can easily be done single-handedly.
Closing the blade on the Zen
requires you to push down on this tensioned release lever.
And although you can do this with one hand,
you do feel like your fingers are more in harm's way
and I would always want to use two hands.
When it comes to selecting the rest of the tools with the Flex,
you push forward on the button and all the tools pop out
and then you fan out the tools,
picking the one you want and it locks into place.
To release it, you push back on the button as before
and fold the tool back into the handle.
It is simple and effective.
With the Zen, you hold it with the tools facing down
and then pull down on the release lever
and the tools drop down with it.
And then you can fan out the tools,
select the one you want and again it locks into place.
And to release it, you press on the release lever
and fold the tool back into the handle.
Now this does not feel quite as refined as the Flex mechanism
but it still works well.
When it comes to removing the tools to swap them about,
which, let's face it, is the main reason for choosing a tool like this,
both makers offer a simple solution.
With the Flex, you deploy the tool you want to remove
and lock it into place.
And then you push the button backwards,
overcoming the tension until it clicks.
The tool can then be removed and replaced.
And with the Zen, you move the release lever all the way to the top
and the tools will loosen and drop down.
You then position the tool you want to remove
at 90 degrees to the handle
and it can then be removed and replaced.
And because the blade slot is separated
from the rest of the tools on the Zen,
with this separator here,
you can remove the blade and everything will still work fine.
Even with the slot left empty,
which is ideal if you need to remove the knife blade
with nothing immediately at hand to replace it with.
Whereas with the Flex,
all the slots need to be occupied at all times.
Otherwise, things all get a bit floppy.
And both tools can benefit from slight tweaks to the torque screws
to get everything finely tuned.
And all of these tools do come with a torque driver
included for that reason.
And the only real drawback with the Zen approach
is that the release lever appears proud of the frame,
which spoils the clean lines somewhat.
And it could get caught on something like a pocket
if putting it away upside down.
I haven't, though, found the lever getting in the way of using the tool
or had any problem of tools becoming inadvertently unlocked
when gripping the handle in use.
There is, though, I think, room for improvement here.
And if there was any future design modifications to the release lever,
it would be easy to swap it out as it attaches like any other tool.
OK, let's have a closer look at the tools.
And in case you were wondering,
the implements cannot be interchanged between the Flex and the Zen.
The Flex has a surprisingly good D2 steel main blade,
which is great to see.
And the Zen also uses a high-end steel 440C,
which sits just below D2 in terms of edge retention.
The Flex Mini, though, in contrast, uses a much more basic steel.
And the blade sizes, as you can see here,
correlate to the overall size of each tool.
Now, when it comes to steel choice for the other tools,
the Flex and the Flex Mini use an entry-level 3Cr13 steel.
And this sort of steel is used extensively for budget multitools
as it can be easily stamped out of sheet steel,
keeping manufacturing costs to a minimum.
The Zen, though, takes a different and altogether more complex approach.
It actually uses the same high-end 440C steel we see used in the main blade,
and that is much more difficult to stamp out.
And so, instead, every tool is individually CNC machined,
which is relatively time-consuming and costly,
and very unusual in any multitool.
The result, though, is a tougher and much higher precision tool set.
And you can see the difference here if I put two similar tools side by side.
These are both can openers with the Roxxon on the left and Ant Design on the right.
And again here with the large flathead screwdriver pry tool,
the Ant Design on the right has a very precise, almost chisel edge,
compared with the more rounded edges of the Roxxon.
And I much prefer the Zen detail and finish.
When it comes to what implements are included with each multitool,
the Flex has a pretty good selection, as you can see here.
And the scissors work really well,
cutting 550 paracord cleanly, even towards the tip.
In addition to the installed implements, you also get a comb included,
which I personally don't really get in a multitool,
and not because I don't have any hair.
And you also get this rather unusual implement,
which holds a pen, sewing needle and tweezers.
I'm not really a fan of this, partly because it feels a bit cheap,
sorry Roxxon, and partly because it takes up two slots,
which seems a bit of a waste.
Then we have the Flex Mini and not the best selection,
I would say here, but these things are always subjective.
And of course they can be changed, which is what these tools are all about.
And this one also comes with an additional tool,
a screwdriver ruler file tool,
which I think is more useful than the installed can opener.
The scissors in the Mini though, do seem inferior to the bigger Flex,
as you can see here with the same paracord cutting test.
Now it does work, you just need smaller cuts rather than one single cut.
Oh yes, and the Mini conceals a couple of scale tools,
which you don't see on the bigger Flex, namely tweezers and the toothpick.
The tools that come with the Zen are also a bit limiting, I would say.
For one, I wouldn't want to be without scissors,
and as it happens I am in luck,
because Zen are just about to release their scissors,
alongside a whole range of new implements.
The scissors, as it turned out, couldn't be machined like the rest of the tools,
due to the thinner steel,
and had to be laser cut instead, which delayed their release.
I do though have an early sample here,
and they do cut really well,
although they require a little bit more effort than the Flex,
due to the slightly smaller size,
making tougher cuts harder on the fingers.
And when it comes to additional tools from both brands,
I have here the new selection of Zen tools,
that are just about to launch as I film this,
with some really nice options,
and I don't see anything that I'm really missing here.
Rockson, who have been doing this now for quite a while,
already have pretty much all of these tools already,
and a lot more besides for both the Flex and the Flex Mini,
which are all interchangeable,
subject to the size,
meaning the longer tools won't, of course, fit the Mini frame.
And then that brings me to the price,
and all of these, I think, represent great value.
The Flex comes in at £50 or dollars,
the Flex Mini is £40 or dollars,
and the Zen starts around £60 or $70.
The Flex is available from Amazon and Rockson's website,
whereas the Zen is only available at the moment,
from the Ant Design website,
and I'll link to everything in the description below.
And as mentioned at the start,
whilst I do like all of these tools,
my preference here is for the Zen.
The size sits in the Goldilocks zone,
large enough to be practical,
and compact enough to be pocketable,
whereas the Flex for me is too bulky,
and the Mini Flex, which I prefer out of the two,
is just a bit too small.
With the Zen, you also get that superior quarter inch bit driver
in the compact size,
with the benefit of the 90 degree lock.
In addition, I prefer the Zen pocket or belt clip,
and the overall quality of the Zen
is a noticeable step up from the Flex.
And the machined tools use a tougher steel,
and offer more precision than the Rockson tools,
and the brushed or satin finish,
in my view, looks more premium too.
The Rockson does have a much greater tool selection,
but I'm not really missing anything
from what Ant Design have now produced.
And the price of the Rockson is cheaper,
but not enough to swing it for me.
In fact, I think the Ant Design, for reasons mentioned,
actually offers better value.
The Rockson operation is definitely more refined,
but I soon got used to the way the Zen works,
and it works fine.
And as a personal point,
I prefer the overall look of the Zen,
especially this version with the black G10 scales.
So, those are my observations,
but do feedback in the comments,
and let me know what you think.
And if you're looking for a larger,
plier-based, modular multi-tool,
then you might want to check out this video here,
which features the very first modular multi-tool,
the GOAT.
And that's it for this one.
Thank you, as always, for watching,
and I hope you can join me for the next one.
