How to Do Porcupine Quill Art (Beginner Quillwork Tutorial)

Native American Crafts
28 followers
Aug 8, 2026
Learn how to do traditional porcupine quillwork with Brian. Last week Brian showed you how to pluck porcupine quills and this week he's doing some simple quill art for a sheath for a neck knife. (Maybe he'll make the knife at some point, too!)
Yeah, well, we took you through the process of plucking quills out of a porcupine and that was so much fun.
So what we're going to do today is show you how to use them.
Before we get too much further, we should say welcome to Stockman Original.
Yes.
I'm Max and this is Brian, the original Stockman.
Today, Brian is going to show me and you how to do quill work.
Yeah, we're so happy that you tuned in to our channel and don't forget to hit the subscribe and like and all that.
And I've got a bunch of quills here that I've had from before and they're all dyed and colored.
I'm not going to go into great details about dyeing.
That's a whole art form of its own.
If people want to pursue natural dyes, there's a bunch of resources for that and stuff I have used.
Let's see. These were done with butternut husks.
We used a vinegar for a set on those comes out a nice kind of a golden brown.
But a lot of these brilliant colors here.
I use Kool-Aid and it's color fast.
We'll grab that hat there.
I wore that hat for several years all the time.
Summertime, bright sun, everything.
And the colors are fast.
They don't fade.
So it's cheap.
It's quick.
It works.
It's not historically accurate.
If you're doing it for historical reasons or any of that, you know, making like museum replicas or anything like that, probably not the route to take.
But for fun and fashion, works great.
It'll definitely jazz up a project.
All right.
Cherry, orange, lime, lemon, and so on and so forth.
There's some great, you know, nice purple.
So, yeah, you can get a lot of nice.
I mean, there's Ritz dye and things like that, all sorts of avenues.
So I'm not going to go too deep into it.
So as a project, I thought, well, I can make a little knife sheath and someday I'll make a little knife to go with it.
I made up a little pattern.
I always like to make a paper pattern because if you like it, then you've got it.
You can use it again.
And what this does is it folds back so you're going to have a seam down the back and you get your whole face here, nice and no obstructions with stitching or anything like that.
And then afterwards, you cut out a little piece of leather and decorate that all up and you slip it in here like that.
Sew it in and so that center seam disappears on the face of it and it gives you a nice little area to decorate.
I'm going to transfer this design onto a piece of leather that I have just stretched onto my little frame here.
I'm using this frame because I didn't want to waste a big piece of leather by putting it into an embroidery hoop.
These things are wonderful.
If you're going to do a large piece of leather or something like, say, you're doing a shirt or whatever you're building, you could do sections of it in one of these things.
It holds the leather nice and taut.
I can hear you doing the back of a jacket.
Yeah.
Something like that.
But here I just want to do a little project kind of just to show you guys.
There are people that do quill work that are expert at this and they're really, really good.
Some of them are even on our tribe, so we're lucky to have them.
But I'm going to show you the basics, just how to get started and have a little bit of fun.
That's all prepped up.
We're using, for thread, I'm using, it's called Nymo.
And what it is, is it's basically like floss.
Yeah.
Yeah, it's very fine.
It's unwaxed.
It frays really easy, so you can, you know, I've got a long length of it here.
Probably won't be able to use it all before it starts to fray apart and I'll just have to add some more on.
Anyway, so we're using...
But in other words, somebody could use floss.
What I quite often use is floss.
And I was going to use this, but it turns out that this particular grade of floss is much coarser than I wanted it.
And it's not being very thick.
But there is zero difference between this and artificial sinew, except for the color of the wax they coat it with.
So this is a great material for that sort of thing.
Sinew, which this is a bunch of, comes from the back strap of the deer.
And when you break it down fine to sew with it, it comes up pretty much white.
So this stuff is a great substitute for it.
This is a lot more tricky to work with.
More self-satisfying when you do use this.
Brain tan, natural dyed quills. Beautiful.
But we're just doing the basics and then if you like it, you can dig deeper into it and do more fantastic stuff.
So these quills I've had for a number of years and they're dried out.
Just been waiting around to use.
So one of the major elements is water, warm water and little dishes for each color.
Not sure how many colors I'm going to start with, but we'll dribble two in here anyway.
I knew it was going to drool down the side.
The first thing I should do is transfer my little design here onto the leather.
Use the suaded side of this because then it'll look more like brain tan.
It'll lay some graphite down so that you can actually see the line,
but in time it'll wear off as opposed to say using a pen or a marker or something very permanent.
I'm going to start with a simple strip of quill work down the center.
There's my track that I'm going to work off of.
It's just a straight strip down the middle.
I'm going to leave a little gap at the top for finishing off the edge there.
Binding the edge and a little bit on the bottom.
I'm just dumping some, I guess some really nice of the big white ones that I was bragging about in our other video.
I mean this is just like yay.
You got a quill that long to play with.
Oh baby.
You do want to sort through them and kind of get a consistent size
and I think this is the size that I'm going to work with to start.
What is the purpose of the water?
The water is to just basically rehydrate.
The warm water will soften the quills.
If you try, you're going to flatten these quills as you go.
You'll see as we're doing it.
And if your quills are dry as a bone, they'll crack just like a bone.
So you want them pliable.
These all have a slight curve to them.
Uh huh.
What do you mean?
Well, they're round.
Oh.
Yeah.
So they're basically going to lay down like a piece of ribbon, ideally.
Uh huh.
Yeah.
These are beauties.
Yeah, that's dandy there.
And they go a long way, so you don't need to get too far, too many ahead of yourself.
Some of these big whiteys are kind of, ah.
Yeah, see that's a pretty chunky one.
And flattened out, that would make a fairly wide ribbon.
You want a certain amount of consistency in it.
Let's see, what color shall we go with that?
I'm going to use something that is similar in diameter.
That's what I'm looking for mostly.
I see some good prospects in the purple bucket here.
These will be a dandy start.
And you do want a separate dish for each color.
Makes it easier in the end to put them back.
This purple with the white is going to be nice because it will look a lot like wampum.
Wampum?
Wampum.
Uh huh.
I got a wampum.
Now a wampum is a quahog shell, quahog clam shell.
Ah.
They have what they call a thumbprint of purple inside the shell.
Uh huh.
You can't see it on the outside, but when you open them up, they'll have like a spot.
That purple shell is what the natives prized for jewelry and beads.
They made a lot of beads out of the white part, but the dark purple beads were more valuable.
Obviously because out of a whole shell you only got a thumbprint of it.
Right.
And they're just about this color purple.
Now find as many comparable size.
There's plenty in here.
I'm going to let them soak for a minute because the water was hot when I brought it out here.
But it isn't anymore.
All right.
So.
We got the thread.
Tangly thread.
Not my favorite.
Now because this is going to be a knife sheath and the back side of this project is never going to show,
I'm going to start stitching from the back.
I'm not going to worry about hiding my threads because they won't be around.
There it is.
Okay.
So generally I anchor with the root end.
So I generally take my needle and prick the quill so that the air that's inside the quill,
there's like a foam inside there but there's also air.
And in order to flatten a quill you need to give it the air someplace to go.
So that's a nice flat piece of quill there.
I'm going to tack her down.
Before I do that, my beer.
Oh!
That happens.
Sometimes you don't see the little cracks in the quill.
Okay.
So I've got that one held down.
I'm going over to this other corner.
And I'm going to come back up.
All right.
It's kind of a back stitch here I'm doing.
Now this guy is going to come over and underneath that.
I'm going to jump over here.
The trick is to keep it what you've already stitched tight.
Thread always helps.
Now I go back over here.
There it is.
Okay.
So now the white guy gets to come up over here.
It's kind of like plaiting, braiding.
I'm using, in this particular case, a number nine Glover's needle.
Glover's needles are a wonderful thing.
You can get them at most craft supplies.
We use Crazy Crow.
They have a grand supply of various sizes.
Number nine is fairly small and yet not too small.
I've got some smaller ones, but this gets crazy after a while.
You can see how this Nymo is already starting to go goofy on me.
My favorite thread to work with.
This is going to come out kind of like a little barber pole pattern.
But it goes along.
Now this is just two quills.
We've already covered about a half an inch of distance.
Ah, it's him again.
Hi, Ben.
Why he's not on the table in the middle of everything yet, I don't know.
I'm sure he will be.
All right.
So we've gotten to the end of the quill.
All right.
What do we do?
I guess we're done.
No, we have more quills.
So what we're going to do is repeat the whole flattening business.
You can clip the end off if you wanted to.
I don't usually.
I just like to prick it.
By just pricking it, the air squeezes out and then it seems to close up a little bit on itself.
So it stays flat.
I'm going to clip the business end a little bit off of this one.
Just because.
I want to make sure it disappears.
So then you take the root end and slip it underneath the last quill like that.
And snug her down.
I'm going to do the same thing to the purple one here.
These long quills are really a lot of fun to work with.
You can go quite a ways with them.
Bring the white one over.
Whenever you're splicing new stuff into old stuff, it's always hard to get started again.
For me, anyway.
Same with adding more fiber in when you're twisting cordage or whatever.
I actually tuck that tail underneath the white one because I think I can't get one back over.
The old times, they used to use the sinew.
They didn't have needles.
So they'd be poking holes with one hand and doing all this stuff with another hand.
Just imagine how complicated that could be.
We jumped ahead a little bit.
Oops.
One of our commenters said, if you want wholesome but boozy content, check out Stockman Original.
Here we are.
So yeah, we're all the way down as far as I'm going and I'm getting ready to end it off.
What I'm going to do is tuck this last white quill in.
Then I'm going to roll the purple one in under itself.
That'll be my final stitch.
Then I'll trim the quills off to hide the ends or the ends go away.
So now, once these quills dry, they won't try to unravel themselves.
They're pretty much stuck where they are.
Basically, all I'm going to do is tie the thread off in the back and trim those ends off flush with that quill.
We'll call her good.
Like I said, this is a pretty basic introductory to it.
There's a whole lot of learning that you can do in this.
It's a fun craft.
Unfortunately, these poor little buggers end up dead on the side of the road.
You can make a little use of it.
Before you let them go back to the earth, then yay, hey for you.
Wham for the porcupine.
You can see in the back, it's just a back and forth stitch.
I'm not worried about the thread showing because they won't.
A sizable triple knot in there so she won't come apart.
Being nylon, it likes to untie itself.
So I generally hit it with a little bit of flame and it melts back to a bead and done.
Melt them all off.
From here, you can keep elaborating.
You can put more down the sides, colors, whatever you want to do.
Thanks for watching.
Don't forget to hit like and subscribe and let us know what else you want to see.
Oh wait, I got one for you.
Don't forget to tell your friends.
If each one of you tells one friend, you'll double our subscription.
Cheers and we'll see you on the next one.
Cheers.
See you on the next one.
