Some of the links provided are paid links. As an Amazon Associate, we earn from qualifying purchases. We are members of similar affiliate programs with other companies as well. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
This video explores the versatility of Heat Transfer Vinyl (HTV) by testing its adhesion on eight unconventional, non-fabric surfaces using a Cricut Mini EasyPress. The creator evaluates various heat settings to determine which materials are compatible and identifies the risks of warping or melting when working with non-traditional substrates.
This is a question that everybody always wants to know.
Eight absolute random products to put HTV on.
A poly folder?
I truly have no clue if any of these are going to work.
And then finally, this one was the one
that I'm honestly the most excited, concerned,
not nervous, but like, like I said,
if you want me to be honest,
I don't know that this is gonna stick
because it does say that this is heat resistant.
If I've been asked once,
I've been asked at least 10,000 times,
can I put HTV on that?
And y'all, this is a question
that everybody always wants to know.
Is there something that I can put HTV on?
Well, if you've ever found yourself asking this question
or asking someone, asking yourself,
this video is for you because in today's video,
I am going to be testing eight absolute random products
to put HTV on y'all.
We are really putting it to the test.
I mean, honestly, I'm talking things like a beach ball,
a silicone container, a poly folder.
I truly have no clue if any of these are going to work,
but we are going to test every single one of these
and see if it works.
This is the one that's honestly confusing me the most.
Do I put it on the metal or on the plastic?
Who knows?
We were gonna test both.
So if you are ready,
let's go ahead and dive into testing
every single one of these products
to see if you can put HTV on these.
Okay, so let's just do a quick overview
of all of the different products
that I have here on the table that we're gonna test
because I want to go about this in a very strategic way
because some of them I think are gonna require
a lower heat setting just to not absolutely melt through.
And some of them I think are gonna be higher.
So I want to start with the ones
that are gonna require the lower heat setting
so we're not having to go back and forth
and change our mini EasyPress
because I am gonna be using a Cricut mini EasyPress today.
Y'all, if you don't already have a mini EasyPress
and you have a Cricut,
at this point, I don't know what you're doing.
It is one of our most used tools here in this office,
especially, I think when we put HTV on something,
it's gonna be nine times out of 10,
we're gonna grab this thing.
So I'm gonna be using the Cricut mini EasyPress
to try to put these on.
And if you have ever worked with a mini EasyPress,
you know that there is not exact temperature settings.
It's just level one, level two, and level three.
So for a lot of these,
I'm going to start with level one heat.
And according to the Cricut website,
the low heat setting is going to range
between 255 degrees Fahrenheit and 295 degrees Fahrenheit.
So if you have an iron or something like that
that you work with, or if you, I don't think,
honestly, I don't think any of these
need to be done for the heat press period.
I just don't.
But those are the heat settings for the low temperature.
Now, some of them we will have to bump up
to medium and or high, but we'll start there.
Now, I do also have a pressing mat.
I am gonna use this for some of the projects,
but I don't think I wanna use it for all of the projects.
Specifically, let's talk about this guy.
Because what this heat pressing mat does
is it holds that heat and it kind of bounces it back.
And I really don't think we need a lot of heat
bouncing back on this plastic ball.
So, like I said, for some of them I am going to use
and some of them I'm not.
So, I say all that to say, let's finally talk
about all of the blanks that we're gonna be testing.
First up, we have a beach ball.
And we have something cut out to go on a beach ball.
This is one, I don't know that it's gonna work.
And this is, we're just gonna go ahead
and separate things out into low heat setting,
medium heat setting, just by off
of my first initial thoughts.
This is definitely gonna go in the low category.
So, we're gonna be starting with this one.
Next up, we have this poly folder.
Now, if we can get HTV to stick to this
and not mess up this folder,
this would be a great way to get a very cheap folder
for back to school, but personalize it
and make it seem like it's very, very special.
So, I'm excited about this one.
I'm still gonna put it in the low category starting out
because I'm not really sure.
Now, next up, we have this cute clipboard.
Now, looking at the back, I think this is definitely
gonna be a medium to high setting.
So, I'm gonna put this one over here.
This one, I'm not as concerned about.
If you want me to be honest,
I think this one is gonna be a really good one.
I think this one's gonna work.
I'm excited though, not 100% sure.
Next is going to be this plastic little snack container.
Now, I have the, maybe in a minute,
I have what we're putting on there.
I had it sitting on top of this little paper thing,
but let me take this off so that you can see it.
So, what this is, is this is a plastic container.
I do think that it is pretty substantial.
I'm gonna go with medium.
Now, it has these smaller containers inside
and if I were to do it with one of the smaller containers,
because this one, looky here, this one is very flimsy.
I think I would start with a low setting for this one.
We're gonna set this one to the side.
Next up is going to be napkins.
This is a great, if this works,
this is gonna be an amazing way for you to customize,
like super cheap colored napkins
to fit a party theme or whatever.
So, we're gonna test this out.
I think I'm gonna start low on this one.
I think that we might need the medium heat
to get it to stick, but I'm gonna start with the low
just because of the napkin.
While we're on the party planning,
the next one that we have is these paper plates
and we've just got happy birthday Elijah on it.
This is such a cute way to add a little bit
of an extra something to a paper plate
or if you wanted to buy just plain paper plates
and put like a big number or something on it,
I think this would be something to have
in your back pocket for party planning.
So, once again, with this one,
I'm kind of in the middle between starting with low
and just going ahead and going medium with this.
So, I think I'm gonna keep it in the middle
and maybe do it as it's heating up to the medium.
Now, next up is this silicone soft box.
So, it is, let me just go ahead and take it.
It says durable and heat resistant.
So, if you want my honest opinion,
this one, I'm very, very curious about this one
because it says that it is heat resistant,
but like does that mean that it can't,
something can't stick on it?
Anyway, I think these silicone containers are so cool.
I love them.
Interesting how that's put together.
It's like little teeth on either side
and you like, that is so cool.
Okay, I really hope this works.
Really hope this works.
I don't know.
Honestly think we're gonna need medium
or high setting for this one though.
So, this is definitely going in the medium
to start out with,
but I do think we might have to use
the high heat setting for that one.
Not 100% sure.
Now, this next one is one that I know
HTV will stick to this cloth, like this towel,
but how will it do on the raised edges,
like on this middle portion?
So, we're gonna test this one out.
This one to me is hands down a medium.
We're gonna have to go medium with this one,
medium heat setting.
And then the last one that I have that we're gonna test,
this one is one that I'm just like,
I don't know about it.
So, this one are, we're doing these metal containers.
So, first of all, these metal containers are super thin.
Now, I had not planned on putting HTV on the metal portion
because this is supposed to be the bottom.
Now, I don't want to put it inside here
because these are made to put food in, right?
So, if we put it inside,
like there's just gonna be food on top of it.
And then if we put it on this side,
this is technically the bottom.
But I am curious if HTV would stick to this metal.
I don't know.
But our thoughts were,
could we get it to stick to this plastic top?
So, if you were, now this,
what she has cut out, it says babysitting.
The thought process with this
is that if you were like making a to-go meal
for someone who just had a baby
and you wanted to make it look a little bit special,
adding something to the front
and maybe putting a little bow on it
is just adds a little bit something extra
rather than just giving them this container.
So, we're gonna test it on this plastic top.
This is definitely gonna have to go in the low heat setting.
I'm gonna go ahead and turn my Mini EasyPress onto low.
We are going to let that heat up.
And as soon as that is heated up,
we will be right back
and we're gonna start testing all of these products.
Okay, so now that our Mini EasyPress is heated up,
what I'm going to do,
I am gonna use a pressing mat for this one
because I do think that this one will withstand the low heat
but I do think that bouncing that heat back
will help the application of this HTV.
So, I'm gonna start with this one.
We are gonna go very slow
and kinda check it as it goes.
So, it does not take a lot.
So, I just did this side.
It does not take a lot of heat.
It is applying down.
You do have to be careful
because if you hold it too long,
I'm afraid that this will warp.
So, I'm just gonna keep going,
as little heat as possible.
Okay, so you see how that's warping up,
how it's pulling it up.
But, uh,
Ruh-roh, hold on.
This didn't, let's try that one more time.
Oh, I'm gonna, I don't think this one is working.
Guys, I picked this one
because I thought that this was gonna be a win.
Like, I thought this was gonna be an easy win.
It was gonna stick.
It was ready to go.
Okay, can I fix this?
Is this fixable?
I actually think this HTV right here,
do y'all see this?
I think that HTV stuck to itself.
Well, guys, I'm gonna call that one a fail.
So, out of the gate.
We're zero for eight.
Oh, for eight.
HTV will stick,
but not great.
Actually, now hold up.
I might have to try this again.
First of all, I thought that this kinda like unwarped,
like it's no longer warped like it was.
It was heated up and it was like curled together.
Do you see this?
And now it's not.
And this is sticking.
But where it was curled,
I don't think I put enough heat on this.
I'm not gonna say we're O for eight yet.
We're gonna come back to this one.
Here in just a minute, I'm gonna cut something else
and then we'll come back to this.
Okay, so actually, I wanna switch out.
I had two things cut out,
like a last name and snacks cut out for the Snacklebox.
I think I'm just going to take this on the silicone
and then we're gonna test out this Best Papa Ever
on the bottom half of this.
Now, I'm still keeping it on low,
but now that I know that this doesn't warp,
so let's come back down here so you all can see.
So now that I know that this warps,
but it will say, it will like come back,
I'm gonna still leave it on low
and we're just gonna let it warp for a minute
and see if we can get it to stick.
And also, I did it.
Let's do it, let's open it up like this.
Okay, so you all see how warped that looks.
You all see that?
You all see this down here?
It's like melty through.
Okay, that stuck because I gave it enough heat.
Now, will it unwarp?
That's gonna be the real question,
is when it cools down,
is it going to like no longer be warped?
And so I'm trying to like cool it down.
Y'all, I think that was a user error the first time
because that works, that works.
Actually works really well.
I'm very, very impressed with that.
I thought that I had lost it.
I did not lose my touch, guys.
It works.
So we are one for eight.
We're not zero for eight now.
So we're gonna take this one as a win.
But one thing that you definitely need to remember
when it comes to if you are gonna add HTV to this
is do it on a low heat setting.
It is going to warp.
That is fine for it to warp
because when it cools back down,
it's like it straightens itself back out.
So this is a win.
You can put HTV on these thin poly folders.
Next, the next one that I want to test out,
I wanna test out these napkins.
So let me go ahead and get my little design off of there
and open up the napkins.
And oh, that pink is bright.
That's what we're gonna do.
We're gonna do it on pink.
So I'm just going to be adding this down to,
let's do it in this little corner right here like this.
Do y'all see this?
Once again, I'm using the low heat setting for this one
and I may need to do more than low.
I don't know yet.
And I am using the pressing mat.
So number one, it did kinda discolor the pink a little bit,
but I think once it cools down, it will be fine.
Shut the front door.
Stop it right now.
This looks so good.
I'm absolutely obsessed with this.
Now, this E, no lies to tell,
it kinda hurts my eyes looking at it with that pink.
But I do think that this is a great hack
to have in your back pocket.
If you wanna do like party planning
and you want to truly have like custom parties,
this is a phenomenal hack.
I'm obsessed with this.
I think that this is gonna be one that honestly,
you're just gonna have to do it for yourself
because it truly does not even feel like
there's any HTV on there.
Absolutely obsessed.
So we are now two for eight.
Now these next two are the two
that I am hands down the most concerned about.
So let's go ahead and get into them.
So I think I want to start out with this one.
And this one worries me to death.
Like absolutely.
And honestly kinda worries me
because like what if it melts on my EasyPress?
I don't know what to do.
I cut these two in half, by the way.
I'm gonna try it on the metal.
I can't help it.
I have to try it on the metal too.
So we'll just put Sutton on this one
and we'll put the baby on the bottom.
Oh my God.
Guys, there's no way.
There's no way.
I mean, we could maybe use a heat gun for this.
Okay, I'm gonna grab this.
I'm gonna try it on the end.
I'm holding it just to give it some support
because y'all, there's no support there.
Okay, here we go.
You could use vinyl on this so easy, but why not try it?
Okay, it's kinda sticking.
It's kind of sticking.
I do find it hilarious that we are testing on this
that you really could just use permanent vinyl.
There's no problem with you using, but why not?
Because sometimes you don't have any permanent vinyl
and all you have is HTV, so.
Stop.
I got it to stick.
Look at this.
I did get it to stick.
You can tell.
It is melted quite, quite a lot.
Not as much as I thought though.
It's still usable, but it actually makes it look worse.
So I personally, because I wouldn't give this,
I'm just gonna call this a no.
This is our first official fail.
Now I did say, I did say the baby side.
We're just gonna try it on the metal because why not?
It's here.
If we're gonna test a bunch of stuff, here's a bonus.
We're gonna try it on the metal.
Why you would wanna put it on the bottom of it,
I don't know, but we're not worried about why.
We're worried about will it stick in this video.
So I'm still doing the little,
I'm not putting my hand straight under this metal.
I am using this towel and kind of holding it down.
Didn't warp the metal, but did it stick?
Oh yeah, boy, cowboy.
It absolutely sticks on metal.
Super easy, no problem at all.
Even this thin metal, it sticks really, really well.
So you can put HTV on the metal part,
but probably not the plastic part.
Can you?
Yes.
Does it look good?
No.
So I guess I would call that like maybe a half win.
Listen, I'm gonna take whatever I can here.
So we'll just call it a half win today.
Now, this next one is one,
and I don't really know the process
of how I want to do this.
I don't know if I want to blow the beach ball up
and try to put it on here,
or if I want to try to spread it out and put it on here.
Maybe, hear me out, we cut this in half.
We do summer without it blown up and see how it does.
And then if that works, then we blow it up,
and then I will let you know which one I think worked better.
If they both work, I don't know that they will.
So I'm just going to put summer.
Now I'm doing it on the side because it's hard for me.
I don't even know, will it fit across this way?
Okay, it will fit across this way.
This is the only thing about it not being blown up
is you have to kind of, and it's hard for y'all to see
because it's a circle, it's a ball.
You have to pull it taut underneath your vinyl.
Once again, I'm using the heat setting of nothing right now.
Let's go back to one.
So we're going to let this heat up
to an official one heat setting,
and then we'll be right back.
Okay, so we're officially heated back up.
I'm doing summer with it not blown up,
and I think I'm going to grab a Teflon sheet, guys.
This makes me nervous.
I'm going to grab a Teflon sheet
so that if it does melt it, it doesn't stick.
But this also may mean that we have to,
ooh, I started with the R.
It's like it's a little bit thinner right there,
but I do think the Teflon sheet was a good move.
So I'm just going to do, I just did a few seconds.
Pretty promising.
The S, or do I need to wait till it's a cool peel?
Okay, the M needs a little bit more love right here.
Let's just do, boom, like that.
Needed a little bit more love down here.
Okay.
Okay, a little bit at the top right here.
Once again, this is very quick movements,
not a lot of heat.
Oh, wow.
I'm kind of shocked a little bit that it did work so well.
Okay, now let's blow it up and see which way works better.
Okay, now that I'm good and lightheaded,
and now that I've got lipstick all over this
trying to blow it up,
let's go ahead and try to put lovin' on this.
So I think I'm going to have to stand up for this.
Okay.
So I'm going to try to put lovin' on this
while it's blown up,
and I'm going to tell you which one I think is easier.
Now I am going to have to protect this
with the, okay.
So far, I'm, once again, a little bit shocked.
Y'all, this did so well.
Like, honestly, both before it was blown up and after.
Now I will say that it was easier for me
to completely lay it down,
but if I had a larger design than just the word lovin',
it might've been easier when it was not blown up,
but I don't have words.
Like, there are no words.
I did not, honest to goodness,
I thought that the Cricut Mini EasyPress
would melt a hole through the ball immediately.
Wow, I'm shocked.
I love this.
So yes, this will work.
You can put HTV on a beach ball,
and that is going to be better, honestly,
than adhesive vinyl because this heat transfer vinyl
is not going to be near as affected by the water
as regular adhesive vinyl.
So if you wanted to put this in water,
definitely you can put heat transfer vinyl on a beach ball.
So we have made it through all of the ones
that I said I thought needed a low heat setting.
So the next heat setting up is the medium,
and it is going to be between 300 and 355 degrees Fahrenheit.
Now for this one, I said I was gonna do the top
of this little snackle box.
We are going to do the clipboard,
and then the little strip here on this towel.
And the other one was the plates.
Now this one was one I wasn't sure
if I wanted to go low or medium on it
because I think I'm gonna do it now.
I'm going to turn this up to medium,
and I'm just gonna go ahead while it's heating up.
We're gonna see if this will work, actually.
Okay, JK, I'm gonna go back down to low
because if I just say I'm gonna,
that doesn't give you all an exact like,
yes, this works, no, it doesn't.
That's more of me testing,
and I know that you all really want the answers as well.
So we're just going to, we're gonna do it on low first,
see if it works, okay?
Okay, so I'm just gonna see if this works on low.
And then if it doesn't, then we will go up to medium.
Oh, it was all good up until that B right there.
Something didn't want it to stick,
and the eye is wanting to come up a little bit.
Maybe I just didn't get enough heat on it the first time.
Oh, so maybe, maybe the medium would do better.
I did just bump it up to medium
so it does have a little bit more heat,
or maybe leaving it on there just a little bit longer
on the low heat setting, but that definitely worked.
Like, when I inspect it really close, I don't even see,
you know how sometimes you can see
like the adhesive spread out underneath the HTV?
I don't see it at all on this one.
So this one is also a win.
You can put HTV on paper plates to personalize them
and make them just a lot cuter.
So you can do this, we're counting that as a win.
Like, honestly, think about this,
Dollar Tree, plain plates, plain napkins.
Obviously these two don't go together,
but some cheap HTV, just a little bit of time
to customize these two.
I mean, honestly, it's a no brainer for me,
especially if you're trying to ball on a budget,
you can get this stuff at Dollar Tree,
add a little bit of cheap HTV and boom,
you have an upscaled party for next to nothing.
Moving on to our snackle box.
I am going to attempt to put HTV on this one.
Now remember, we moved our heat setting
up to a medium heat setting.
Do I protect the, okay, yes, yes.
Y'all see those three little, like right here?
I'm trying to show it in the light so you can see.
That's where I just laid it down
and then there's some places up here.
So yes, we want to protect this plastic
if you want it to stay clear.
So we're gonna protect it with a Teflon sheet.
Now, the Teflon sheet, did it warp it a little bit?
Maybe just a tad, but not bad.
The Teflon sheet did protect it
from getting like any other burn marks
other than those three right there, but did it stick?
It did stick, but there are places
that are wanting to come up.
So let me go ahead and hit it one more time
with just a little bit more heat.
It doesn't feel very hot, which is a good thing,
but also like, did the heat even make it to the vinyl?
It's still wanting to pull in a couple places.
Okay, so that time we did get a few more marks
because this is a clear,
do y'all see literally right here at my thumb?
Because this is a clear container,
these are like Teflon marks.
Can you see right there?
You should be able to see them.
So we did get a couple of Teflon marks.
It is a little bit warped, just a tad,
but that time the HTV stuck down really, really well.
Actually, and then we should have an S for snacks.
And then looking at the back,
you can kind of see where the HTV stuck
and like the little bubbles of kind of like
where it might've needed a little bit more heat,
but I think that it's set down pretty, pretty well.
So I'm gonna call this one a win as well.
I think this one is hands down.
I love this.
The only thing is, like I said, you have to be careful.
Use a Teflon sheet.
You don't want to burn this clear plastic.
It is easy to burn that clear plastic
and you do want to try to keep it clear.
So that's a win.
Moving on.
We're gonna do this towel and we're gonna see
if it will stick right there on the,
like on the thread portion.
Now, if you want me to be honest,
I think we're not gonna have a problem
to get it to stick here.
So we're just gonna, but I could be wrong.
I've been wrong about a lot of things.
So it did stick, but it did not go down in like the grooves.
I wonder if I press it down.
Because that's where I would be afraid that it would.
So I just covered it with a Teflon.
Yeah, it stuck.
That's a good one.
So moving on, that's another win under our belt.
Now this one is one that maybe possibly
could need high heat,
but I think we're gonna test it as is first with medium.
We're on medium heat.
So I'm gonna test this on medium heat first.
Oh yeah, this is going down like butter.
It was like it was going down
and then it was wanting to come back up.
Interesting.
No, I lied.
It's not going down like butter.
Go ahead and bump this up to high heat
and we're gonna let that sit.
Parts of it are wanting to stick and part of it is not.
So this one may need high heat.
Now, according to Cricut's website,
high heat is 360 to 400 degrees Fahrenheit.
So we're really cranking up the heat with this.
Now that it's on, let's just go ahead
and see what some high heat does.
It still brought up this little corner over here.
Honestly, I was really thinking that this one
was not gonna give me any trouble at all.
It's still not stuck all the way up here either.
It was trying to pull off of there.
Oh, that little piece right there was trying to pull up.
Okay, so that one does work.
You can put HTV on a clipboard like this one,
but just remember,
you need to make sure you put this on a high heat
because the medium heat, I just don't think was working.
So this one, check, that's a win.
And then finally,
this one was the one that I'm honestly
the most excited, concerned, not nervous,
but like I said, if you want me to be honest,
I don't know that this is gonna stick
because it does say that this is heat resistant.
So does that mean that the adhesive
is not gonna stick to it as well?
So we are gonna do this one on high heat.
Let's just see what it does to the silicone.
Okay, so it's not really doing anything to the silicone,
so we might not need to protect it per se.
But will the adhesive stick to the silicone
is my next question.
Like no problem, literally no problem at all.
Let's see, can we peel it right off if we fold it?
Okay, I was really rough with it.
I was super rough with it and it did,
but it was still warm.
So it does peel up.
How easy does it peel up?
You have to really try to peel.
So it did stick.
Let's just be clear, it did stick.
But if you do, if it rolls, you can peel it up.
I don't know, would you count that a win
or would you count that a half win
or would you count that a miss?
I guess we will let you all decide.
You all saw how I was scratching and working on this.
So once you do get a corner peeled up,
it does come up pretty easy on the silicone,
but it does stick.
It surely does.
So like, what if you did this,
not saying you would want to put HTV on a silicone container
and like peel it off and change it out
for like every other thing,
but you could label it and then relabel it.
Anyway, I don't know.
You guys tell me what you think.
Would you consider that one a win?
Would you not?
Oh my goodness, guys.
What did you think about all of these things?
What surprised you the most?
If you want my honest opinion,
I think what probably surprised me the most
was both the beach ball and this folder.
I mean, honestly, I never would have thought
that I could have personalized something like this
and it did so well.
Let me know in the comments,
which one shocked you the most
and which one did you like the most?
I really wish that this would have stayed on
a little bit better.
Like I said, it did stay on a little bit,
but once you started rubbing it,
it did start coming off
because that would have been amazing.
Now, if you have made it this far
and you haven't already,
make sure to hit that thumbs up button
and subscribe to our channel.
And y'all, if you think that this was informative,
you should see all of the educational stuff
that we have inside our membership.
So if you are here and you are not an MGL member,
I have a link down below,
especially for you where you can try us out
for seven days for $7.
And y'all, as a little thank you for just trying us out,
you're gonna get 20 download credits
that you can keep forever.
So you can get 20 cut files, 20 fonts,
or a mixture of both.
But y'all, once you get in the membership
and you see everything that we have to offer,
I think you're going to want to stay.
So if you're not a member,
check that link out down below.
And if you haven't, hit that thumbs up button
and subscribe to our channel.
And y'all, I'll see you guys in the next one.
Thank you so much for being here.
Bye guys.