How Engineers Predict Material Stretch- Beyond The Basics Episode 2

Neo Structure
3 followers
Aug 5, 2026
Ever wondered why some parts barely move under load while others stretch?
In this episode, Jake breaks down the engineering behind elongation. From stress and strain to Young's Modulus, you'll learn why different materials behav
AI Generated·May contain errors
Video Summary
AI GeneratedThis video explains how to mathematically predict the elongation of a part under axial force. It covers the relationship between geometry and material properties, introducing key engineering concepts like stress, strain, and Young's Modulus to demonstrate how different variables influence a part's deformation.
Yo, did you know that you can mathematically predict how long a part will stretch when you
apply a force? Now when we're talking about elongation or stretch in our parts there's two
main factors that we're going to be considering. One is the geometry, so the overall shape of the
part and the thickness of it. And the second one is is what type of material or the material
properties that we're going to be applying that stress on. Now in this video we're going to be
making two large assumptions as well. The first one is is that we're staying inside that linear
elastic region. And what do I mean by that? I mean as we're applying that force and stretching
out this part it's when we relieve that stress it's going to go right back to its original length.
Now that's really important as we put too much stress on a part it can actually deform permanently
and the equation completely changes. Now the second thing is is that when we're applying
that force we're going to be doing it completely axially straight straight through this part.
We're not going to be doing any torsional loads on this as well. We're going over a handful of
equations in this lecture and all of those equations are going to end up coming together
into one large equation which will describe our deformation. But the first one that we need to
understand is stress. And we talked about stress in a lot more detail in a previous video linked
here, but it's simply just the force divided by the area. And that force is that linear force that
we're applying to the part like we talked about in our disclaimer. And the area if we cut this part
half is just the cross-sectional area. So the width multiplied by the thickness. If we apply
too much force to this part we're going to end up seeing a rupture of that part.
The second equation that we're going to get into is our strain. Now the strain is just the change
in the length of that part as we apply that load divided by its original length. Now one also way
that you're going to see this typically in engineering textbooks is we're going to have
this delta symbol or that greek symbol there. Delta typically means change and then we're going
to have length. So change in length divided by length and then I have a little o here for
original. So change in length over original length. Now what we can do is take that and we can plug it
into another equation called Hooke's law. Now Hooke's law is essentially saying that our stress
is proportional to our strain. And to better understand that we can check out a graph. Looking
at the graph we have our strain on the x-axis and our stress on the y-axis. As we increase that
strain and that pressure on our part we see that the stress is also increasing on the y-axis. Now
this is a straight and linear line at the very beginning that we call our linear elastic region.
This is also defined by Hooke's law seeing that they're both proportional to each other. Now
looking at the graph we start seeing something that should be familiar. That is the linear
equation. Now that equation essentially is a straight line equation and if we remember back
b is our y-intercept and the way that we figure that out is we set our x to zero. If we set our
strain to zero, which we're going to talk about here in a second, we end up seeing that our stress
is also zero. Which means that b can just go away. Simplifying that equation we can actually just plug
in what's above. Our stress becomes our y, our strain is our x, and this big e which we're going
to get to here in a second becomes our slope of our equation or that angle in which this line is
going to be coming out. Now e or our slope is called our elastic modulus or Young's modulus as
well. The way that we figure out this particular part of our equation is through physical testing.
As we apply strain and we see how the stress reacts we can then plug this in and plot it and
we get our slope. So each type of material has a different Young's modulus or elastic modulus
associated with it and we get that through testing. One really useful thing that is at
already is that it provides the material properties directly on the website. So if
you're designing a part and you need to immediately look up the elastic modulus or Young's modulus
it's in the material section. We talked about at the very beginning that the things that can affect
our elongation or that stretch are two factors. Our geometry and also the material properties. Now
with that being said if we look back at Hooke's law that stress is equal to the elastic modulus
or Young's modulus times the strain we can then plug in what we know to be stress and strain. So
force divided by area is equal to the elastic modulus times the change in length over the
original length. I know that's a mouthful but what we're going to do is we want to solve for
the change in length that's our elongation that we're looking for. So if we take this side of the
equation we multiply it across we have to flip it right we're going to end up seeing this equation
pop out of it here. So we're going to have a force times the length over the area times elastic
modulus. If we rearrange that equation and flip it back around we now have an accurate representation
of how to calculate the change in length. All right we got a scale we need to connect this scale
to the forklift which we're going to do by just making a loop like this and then I'm going to
raise this up and we're going to make a second loop that attaches our material between the two
so we can actually pull force but we'll have this scale to see how much force we're applying to it
we can apply the same amount of force between two different materials keep our equation variables the
same and just see that elastic modulus come through. Good enough for you? Safety first. Now it'll work.
I am forklift certified just to make that very clear that doesn't fit it's too big I need more
chains probably not the best way to do this but it's also going to do it so which is also key
I might need a longer bolt we're going to use this chain on the top and the bottom I gotta go
get a longer bolt. Is that kind of thinking that separates them in from the boys? That's it. For this
material phase off we have buna n versus aluminum the battle of elongation. Now both competitors
have the exact same starting dimensions length width and thickness the only difference is their
material properties. If we look at these two examples buna and aluminum and we see what's
happening inside the equation it becomes really clear why there's a difference. First of all our
force is the same our original length is the same the area is the same what's different is our young's
modulus here. If we look at the equation overall we can see that the young's modulus is inversely
proportional to the change in length or that elongation that we're trying to calculate.
Another way to look at this is that if we take our young's modulus and we go to say infinity or get
really really large our change in length is going to get really really small so we're going inversely
proportional. The same is the opposite as our young's modulus gets smaller our change in length gets
larger. If we look at Senka Sen's website and we look at what the actual young's modulus or elastic
modulus is we can see that the buna has 150 psi compared to the aluminum at almost 10 million psi.
So this is actually showing us exactly what's happening in our real world example. It's like
one thing that's been really important about this one is that we clamp this down as much as possible
so we're not putting that stress around the outside of our bolt holes. Same shape two
completely different outcomes at 2700 pounds the aluminum barely moves and at only 150 pounds
buna n is already stretching like crazy that's the power of material selection. Now if we start
making changes like to force and we increase that force we're gonna see more deformation
they're directly proportionate to each other in the equation. However when we're designing parts
we don't normally have a lot of control over the force the parts gonna see. The force is something
we're designing up again. We want our part to be stronger than the situation that we're being put
into. Now with that being said though we do have control over the other three variables in our
equation. The young's modulus or elastic modulus we have control over by just simply changing the
material. We can go from aluminum to steel directly affecting the overall strength of the part
and decreasing our deformation when we see the same amount of force. Now when we start looking
at our overall length or the original length in the area we can see that there have different
effects on the length. If we have the original length increase being on the top of the equation
it's directly proportional increasing that original length adds more deformation to the
part we're going to see more change in length versus a shorter part decreasing the overall
length of the part we're going to see less deformation overall at the end result with the
same amount of force that's the only thing we're changing. Now with area it's inversely proportional
it's at the very bottom of our equation. If we increase that area and we can do this through
two different ways we can increase the width of the part or we can increase the thickness of the
part going to a thicker gauge we can increase that stress which we're going to see decrease
in overall deformation in the part and the opposite of that being true saying less area is more
deformation so if we go to a thinner gauge decrease that overall width. Engineering is
powerful because it helps us understand how a part is going to react before we even design it.
Understanding stress force and material properties like Young's modulus helps us make bigger and
better parts. To get your parts made drag or drop that step file or dxf on thesanecustom.com
love you bye
