KTM 350EXC-F with Chris Hollis & Adam Riemann

Adventure Ride Experience
9 followers
6 Video Views·Aug 3, 2026
Australian Off-Road Champion Chris Hollis shows you how altering the fork height can change the handling of your bike.
AI Generated·May contain errors
Video Summary
AI GeneratedAustralian off-road champion Chris Hollis explains how to adjust fork height to optimize bike handling. He discusses how changing the fork position affects stability and turning capabilities based on terrain, while emphasizing the critical importance of using correct torque settings to avoid compromising fork performance.
Hey guys, welcome to part two of our bike setup videos.
I've got an assistant with me today, his name's Chris Hollis.
You've probably heard of him, he's the current Australian off-road champion and he's going
to show us how to set up the front end of a bike.
Thanks mate.
In part one Adam showed you how to change the front tyre and fit the wheel to the bike.
From there on we're going to talk about the importance of fork height and how much the
fork height can change the way your whole bike handles.
Changing the fork height for certain tracks can make a really big difference to how your
bike will handle in certain conditions.
Every rider's different, people run different fork heights to suit their riding styles and
it makes a big difference.
Some guys will run them really long, some guys will run them really short.
Depending on what kind of terrain you're riding on, say a tight single bush track for instance,
a lot of guys will run the fork up a little bit higher which will change the trail of
the bike making it shorter which will make the bike turn more.
And for instance a long grass track where high speed is involved, you run the fork back
out making the bike longer, changing the trail, making the bike more stable but not turn as
fast as it would in the bush.
You know it's a two minute job to adjust the fork height and I'll just give you a demonstration
of how it's done and how you should do it properly.
So to start off we just back these 10mm off and that's going to allow the fork to move
up and down in the triple clamp.
Say for example we're going to go to a real fast race with a lot of straight paddocks
or desert or sand even, we want the stability back in the bike.
You just find a nice place on the side of the fork, in between the bar, somewhere where
you're not going to do too much damage.
Some guys like to run them all the way down, you just push it right down like that and
that's a good 4mm there, it's making the bike longer and it's going to handle a lot
better in the real fast open desert kind of style races.
Some guys just racing like to have their bike really long in the front, they get all their
weight over the front.
I like to have mine back up, my fork back up higher, I like the bike to be sitting down
in the front so I feel like I'm over the top of the bike and in control but every ride
is different.
It's something you should just muck around with one day when you're at a nice track that
you're comfortable with and get to learn your bike and learn how much difference it
makes.
Every bike is different, it's something you need to fiddle with a little bit and just
get to know your bike pretty much with the fork height and find a comfortable base setting
that you like running every day when you're riding.
When you're doing these bolts back up it's ideal to have a torque wrench and check your
manufacturer manual for torque settings because every bike is different.
I can't stress enough about the importance of having the right tension on these bolts.
If you over tighten them, which most people do, you can cause a crimping sensation which
will give you the similar effect as what Adam explained in the part one of not having your
fork leg in the right position.
The triple clamp is designed to hold these forks in really tight so the bolts don't need
that much tension.
If I was going to over tighten these, like I just did, and to get back on my bike and
head out there, the front end would feel completely different.
It wouldn't feel plush, you'd have a really harsh, when the inner fork tube went up, you'd
have a really harsh feel and the bike would feel really rigid and like it was hitting
a hard spot in the fork leg.
In doing that you've just given the bike a problem that you've done yourself and it's
not the bike's fault so it's really important to check these and have them at the right
tension because you want that fork, the fork leg to be straight and that fork to be working
perfect.
So there you go guys, next time you're out riding on your favourite track, a track that
you know well, take a 10 or a 12mm T-bar and have a muck around with your fork heights.
At the end of the day, you're most likely going to find out that you could have been
riding a piece of junk or your bike's going to be transformed into something that you
really love and enjoy riding, which at the end of the day is what it comes down to.
