Why Do Red Dot Sights Have Fake Night Vision Settings?

Tactical Military Gear & Gadgets
4 followers
Aug 3, 2026
I've been tricked
AI Generated·May contain errors
Video Summary
AI GeneratedThe video discusses the issue of \"fake\" night vision (NV) settings on red dot sights, where manufacturers claim NV compatibility but provide brightness levels that are too high, causing \"blooming\" or washing out the image through night vision tubes. The speaker analyzes different approaches to brightness scaling and critiques several popular optics.
Hey, what's up, guys? Hop here. Thank you for tuning into the channel.
I have got a SIG Romeo 5 Gen 2 Elite on this gun.
I spent many years using the original Romeo 5. It was one of the first truly good budget red dots.
This one, the Gen 2, is several years newer. It's a little bit more expensive,
and this is also the Elite model, so it comes with a 193 riser for better use with night vision,
and it also has the option of a selectable reticle.
This should be a whole lot better than the original Romeo 5,
but the night vision settings on the Romeo 5 Gen 2 are not real.
This problem is not exclusive to the Romeo 5 Gen 2, nor is it exclusive to budget red dots in general.
There are tons of red dots on the market, even relatively high-end ones,
where the night vision settings are not exactly a lie, but maybe more of a half-truth.
So, today we're going to talk about fake night vision settings on red dots,
and yes, we're going to name and shame more than a couple of them.
I'm not sure if manufacturers are compelled to lie about having night vision settings,
or if they just don't have the ability to dial in the brightness correctly.
I think a lot of them might just be phoning it in
because they underestimate the appetite for night vision that consumers actually have.
Anyway, let's get into it.
This video is brought to you by our channel sponsor, Venture Surplus.
Check them out at the link in the video description for camouflage clothing,
outdoor and tactical gear, pouches, cold weather layering gear, and survival rations.
Not just military surplus, but also some new stuff that Venture tests out and can vouch for.
Use the code provided in the description to save 10% off your order.
Thank you to Venture Surplus for supporting this channel.
Thank you guys for watching.
Let's get back to the video.
I know brightness settings on red dots is a niche at the bottom of the niche
when it comes to night vision, but it's my special interest,
and that means you have to validate me.
The two attributes of a red dot that make it suitable
for use with night vision passive aiming are light transmission and brightness settings.
Light transmission is pretty simple.
The brighter and clearer the image, the better.
Brightness settings are harder to get right.
Just making the dot dimmer isn't always the answer.
You need a brightness setting that matches the ambient lighting conditions.
Too dim, you can't see it.
Too bright, it blooms too much, washes out the target, and causes your tube to autogate.
If you're under tree cover on a cloudy night, you'll want an extremely dim reticle.
If you're out in the open under a full moon or in urban environment with light pollution,
you want something that's close to the daylight range.
There are three approaches to getting the brightness settings just right.
The brute force method is to add tons of brightness settings.
The most common spread of daylight and night vision settings you see
in budget-priced red dots is 10 and 2.
EOTech's holographic sights, which are famous for their passive night vision performance,
have 20 and 10.
At least on the real models and not the Mall Ninja bait models.
This is why EOTechs are still nigh unbeatable for passive aiming.
On top of excellent light transmission,
they have a brightness setting for every conceivable situation.
Sure, you have to hammer on the buttons a ton of times, but you'll get there.
Adding lots of extra brightness settings to optics can be a headache.
On red dots with buttons, you force the shooter to hammer on buttons over and over
to make any meaningful change to the brightness settings,
which could be a problem if they need more brightness in a hurry.
That's where the night vision override button on some of the newer SIG red dots comes into play.
On red dots with adjustment knobs, the adjustment is faster,
but you end up just running out of positions on the knob.
Aimpoint did something interesting on their old comp series red dots
where there was no off position,
freeing up one of the detents of the adjustment knob to be the lowest night vision setting.
Battery life wasn't a concern,
because leaving an aimpoint comp on the lowest setting
still gave you basically infinity battery life.
The second approach is to add a couple more NV settings,
and maybe even sacrifice a few of your daylight settings
to create the spread of brightness options necessary to cover more situations.
This is very common.
The lowest handful of brightness settings are already totally unusable on almost any red dot.
If you're using it in the daytime, you'll be on the highest or second highest.
If you're using it indoors or in low light, you'll be somewhere in the middle range,
just because lighting conditions can be variable,
and you might want to use it in conjunction with a weapon light.
And then the bottom third of the range is so dim it basically can't be used.
There are plenty of examples of red dots with excellent night vision performance,
where the officially advertised night vision settings are very dim,
and then the bottom few daylight settings are brighter,
but still usable with night vision in brighter environments.
The Venerable Aimpoint T2 and the Romeo 4T Pro are in this category.
And what's the third way to make your red dot ready for night vision?
Simple. You lie about it.
There are plenty of red dots, and not just bottom-of-the-barrel budget dots,
that are advertised as having night vision settings, but effectively do not.
Technically, it's not a lie.
Modern night vision is very robust.
You can use it in surprisingly bright nighttime environments,
and it can still provide a benefit.
And if it's bright enough, most of those red dots will still work to an extent.
But if you go outside the city, if the moon goes behind a cloud,
suddenly a big fireball is gating your tubes.
In no particular order, let's shame some of the manufacturers who are doing this.
I brought up the Romeo 5 Gen 2 at the start of the video.
The original Romeo 5 isn't a fantastic optic for passive aiming,
and the Romeo 5 Gen 2 isn't much better.
The glass is a tiny bit clearer, and there's less noticeable reflection on the rear lens,
but the brightness settings seem identical to the original, i.e. not good.
The lowest NV setting is on the high side of what I'd like,
and the NV2 setting already starts creating a big halo in even a moderately lit environment.
If you switch over to the Circle Dot reticle, it gets worse.
Either there was no attempt to reduce the brightness of the Circle Dot reticle
to compensate for the larger illuminated portion,
or the technology of the Romeo 5 Gen 2 doesn't really support that.
It's tempting to say this is just a budget red dot problem,
but I have to point out that similarly priced Holosun optics don't have that issue.
Holosun's current budget dot, the ARO, has better brightness settings.
The lowest three settings are reasonably usable,
and it's not until you hit Daylight 2 that you start to notice the bloom.
Some of their older designs were even better.
The HS403R increases the spacing between the two night vision settings,
so the lowest NV setting ends up being usable in extremely dark conditions,
the NV2 setting is usable in mixed conditions,
and the lowest daylight settings are useful in bright conditions.
You can still get very good spacing with the newer AIMS X2 Pro,
which has four official night vision settings.
Okay, back to the bad news.
Vortex's new Defender and Defender Enclosed series
are advertised as having night vision settings, but not really.
The lowest settings are still easily visible without night vision.
The NV1 setting blooms badly even in medium lighting conditions.
The cheaper Vortex Venom Enclosed is not advertised as having night vision,
and I can barely tell the difference between that and the more expensive Defenders.
Shooting pistols with night vision is kind of an edge case,
but this is more of a concern if you wanted to use one of these things
as a piggyback optic for passive aiming.
Another bad example is the Trijicon MRO series.
The original MRO was completely unsuitable for passive aiming.
The MRO-HD is a lot better and has pretty good glass clarity,
but it doesn't get dim enough.
The MRO brightness knob also has fewer stops than is typical.
Six daylight, two night vision,
so their brightness spacing would have to be really dialed in.
Thankfully, that seems to be the case with the newest model, the MRO-SD.
The night vision brightness settings are much more usable.
Unfortunately, the SD has all sorts of other problems.
You can see my review for details.
So how do you avoid getting screwed out of your hard-earned night vision settings?
You could stick with brands that have a good track record
of paying attention to night vision brightness levels.
EOTech and Aimpoint used to be the reigning champs of night vision performance,
but they've since been dethroned by SIG's flagship American-made optics.
The Romeo 4T Pro, 8T, and 8T AMR are great performers.
They do not have the problems of the SIG-branded Chinese-made red dots.
Allosun also does a very good job with night vision settings
on both their pistol optics and rifle optics.
If you can get your hands on an optic before you buy it,
you can always just turn the brightness down all the way
and see if the dot is still visible.
If it's even faintly visible to the naked eye at minimum brightness,
that doesn't bode well for the night vision settings.
If all else fails, just wait for a review.
It would be nice if manufacturers put a bit more effort
into refining the red dot night vision settings,
but it's probably a low priority for them
and may be hard to get it really dialed in on Chinese-made models.
The lowest few settings on most red dots
are too dim to be useful in any normal circumstances,
so just call them night vision settings
and now you have a cool-sounding bullet point to put on the sell sheet.
Unfortunately, this is a case of buyer beware.
There's no such thing as standardized night vision brightness levels,
so you're just going to have to be careful when you're shopping around.
That's all for today. Thank you guys very much for watching.
Check out the links in the video description for ways to support the channel.
There's lots of bonus stuff over on Subscribestar.
Please let me know in the comments if you have any questions,
and I'll see you next time.
