LIVE: NASA Experts Hold US Spacewalk Preview News Conference

Live News Network
1.4K followers
29 Video Views·Jul 30, 2026
NASA Experts will hold a Preview News Conference to speak about three upcoming spacewalks this August. These spacewalks are scheduled for Aug. 6, Aug. 13, and Aug. 25. Astronauts will venture outside the International Space Station to repair and upgrade the orbiting laboratory. This event is held at NASA’s Johnson Space Center in Houston and scheduled to start at 2 p.m. ET on July 30.
NASA participants include:
Bill Spetch, deputy manager of Commercial, Low Earth Orbit Program
Chris Dobbins, spacewalk flight director
Chloe Mehring, spacewalk flight director
AI Generated·May contain errors
Good afternoon and welcome to NASA's Johnson Space Center here in Houston, Texas. I'm Joseph
Zachrzeski with NASA Communications and we look forward to discussing three upcoming spacewalks
that will occur in the month of August outside of the International Space Station and all three
will be seen on NASA Plus and for more on that coverage you can visit nasa.gov. For media members
that are joining us today for our conversations you can join the queue by joining and hitting
star one and then to retract your question you can use star two. Now as we discuss these
programmatic and operations significance of these spacewalks that will be coming up again in the
month of August, joining us to discuss these on our panel are Bill Spetsch, Deputy Manager of
Commercial Low Earth Orbit Program, Chris Dobbins, Space Flight Director, and Chloe Merring, a Space
Walk Flight Director. Now again if you wish to join the queue at any point during today's
conversation you can use star one for our media members on the phone lines and star two to retract
your question. With that we'll begin with some opening remarks from Bill Spetsch. All right thank
you and thank you everyone for joining us today. We really appreciate your interest in our efforts
in low earth orbit and the International Space Station and we look forward to discussing this
upcoming series of spacewalks. It's been an exciting couple of weeks in the space station
operations. Of course Neil Menon launched just a couple weeks ago and he's getting settled into
space station life and has begun contributing to science and research investigations on board.
Just last weekend Chris Williams returned on the Soyuz after spending 241 days in space as part of
his first spaceflight. He's doing well and has returned to Houston to begin his post-flight
recovery period. Thanks to all the teams who supported both the launch and the landings and
all aspects of these missions. Looking ahead throughout the month of August the team will
remain busy as they conduct and support these spacewalks that we have coming up.
U.S. spacewalks 96, 97 and 98 will be the 281st, 282nd and 283rd conducted in support of space
station assembly operations and maintenance. So on Thursday August 6th we'll conduct our first
spacewalk spacewalks 96. The first spacewalk is scheduled for Jessica Meir and Neil Menon
to exit the quest airlock and install hardware that will modify the station's 3b power channel
and prepare it for the future installation of a rollout solar array or iROSA. The solar array
scheduled for delivery later this year will provide additional power to support critical
station operations including its safe and controlled deorbit. Spacewalks will be the
Then a week later Thursday August 13th we'll do U.S. spacewalk 97. We'll have two astronauts
go outside and replace a space-to-ground antenna for the orbital complex. The antenna that we will
be replacing is critical communication system that we use to transmit data and high-speed
communication between mission control in Houston and the space station and we'll follow that up
on Thursday August 25th with the third and final spacewalk for this series. We'll have two crew
members connect power channel cables data relay systems as part of ongoing maintenance including
preparations for the space station's future deorbit. The astronauts will also replace a navigational
aid that is used for spacecraft docking on the Harmony module's forward port. We will share
additional details about spacewalks 97 and 98 including timing assigned crews and coverage
information as we get closer to each of those. Beyond these spacewalks we have a busy fall and
winter ahead. Early in September we'll have our next progress exchange where we will launch and
dock 96 Progress to the Russian segment of the International Space Station. Then in mid-September
we'll begin our crew exchange using the for the next Crew 13 mission. That mission will carry
NASA astronauts Jessica Watkins and Luke Delaney, CSA astronaut Josh Kutryk and Roscosmos cosmonaut
aboard the SpaceX Dragon spacecraft launched on a Falcon 9 rocket. Their work in orbit will advance
critical science and technology that supports exploration of the Moon, Mars and benefits life
here on Earth. Then in the fall we'll get into our next commercial resupply mission from SpaceX
CRS-35. That mission is targeted to launch more than 7,200 pounds of cargo and payloads
including the International Space Station rollout solar arrays that we just talked about.
That launch will occur from Space Launch Complex 40. And then looking farther ahead as we get into
the winter NASA's Northrop Grumman Commercial Resupply Services 25 mission is targeted to launch
towards the end of this year. To give us a little bit more about each of these spacewalks I'll turn
it over to our flight directors here starting with Chris Dunn. Thank you Bill and thank you all for
your interest in our EVAs and the space station operations later this summer and this fall.
Earlier this year in March our spacewalk flight director Ronak Dave for the EVA-96 the
the solar array mod kit upgrade EVA for Channel 3 Bravo was already briefed in great detail so
I'll just give a few words to remind everyone of that EVA. We go to the the slide with the
solar arrays on it that would be great. We'll be installing the final mod kit for the rollout
solar arrays setting up for the EVAs once Commercial Resupply Mission 35 SpaceX 35
arrives later this year so we can install our final two solar arrays. Also on this EVA
the crew will be relocating some equipment to help optimize those solar array EVAs as well as
later in August to repair the antenna and to perform the upgrades and modifications on the
triple jump EVA. As Bill mentioned the crew for EVA-96 will be Jessica Meir as EV-1. She'll be
wearing the red stripe on her suit to identify her and EV-2 will be Anil Menon wearing an unmarked
suit. On board the space station ESA astronaut Sophie Adno and NASA astronaut Jack Hathaway will
be assisting Jessica and Anil as they conduct the spacewalk and get ready for it. As I mentioned
Ronak Dave is the flight director for this operation and the person responsible on the
ground for communicating with the crew outside of the space station during the EVA will be
NASA astronaut Stephanie Wilson. The other person communicating with the crew specifically the
on-board crew will be JAXA astronaut Aki Hoshide and the EVA team will be led by Stephen Villano.
They're all very excited to go conduct this spacewalk next week and are ready to go execute
a safe operation. I'll talk a little bit more about the space ground antenna EVA which will
be a week after that on August 13th. So late last year we can show the slide of the
antenna itself. Late last year one of our two KU band antennas began experiencing issues that
prevented it from gimbling to track the tracking data relay satellites. Those are the
satellites in geosynchronous orbit that enable communication with ISS and the ground. Those KU
band antennas we have two of them on space station are what we use for high rate data
communications which include high def video extra audio channels with the ground and all of our
extended science data for our payload specialists. Fortunately even though one of those antennas is
currently degraded and we're not able to use it we do have two on board so we haven't lost
any capability while we've waited to to conduct the repairs on this EVA. That antenna you see
on the screen now weighs approximately 200 pounds it's a six foot diameter dish and it's about six
feet long so we'll get some pretty spectacular views of crew members holding that antenna as
we conduct the spacewalk. The spare we're replacing it with arrived on a space shuttle mission back in
2009 STS-127 and the current active antenna that is degraded we're replacing arrived in 2010 and
it's lived a long and healthy life. With that we've got an animation that describes in more detail how
the antenna will be replaced and I'll hand it over to the production team to show that animation.
Our day will start with EV1 in red stripes and EV2 in white. Crew will egress the international
space station from the airlock and will both be carrying a tool bag. EV1 will translate to an
external pallet forward of the airlock to retrieve a foot restraint that they will take as they
translate starboard to set up and ingress the space station robotic manipulator system or robotic arm
from the S-1 truss. Once EV1 is ingressed the robotic arm will back off from structure
and then maneuver the crew up and over the main truss to the space to ground antenna or
SCANT worksite. Meanwhile EV2 will translate aft and zenith around the airlock to the Z-1 truss.
Here EV2 will set up the worksite to remove and temporarily stow the failed SCANT antenna.
Next they will translate up the antenna boom to prepare the SCANT for removal.
Shortly after EV1 will be arriving on the robotic arm. The true crew will work together to install
locks over the antenna's gimbals to restrain it from motion during handling.
Next EV1 will demate two electrical connectors. The crew will then work together to release
four bolts holding the antenna to the boom. EV1 will remove the SCANT from the boom back
away from the worksite. EV2 will translate down the boom to the temp stow location.
EV1 will hand the antenna to EV2 who will install it in a temporary stowage location.
From here the crew will maneuver starboard for the retrieval of the spare antenna.
EV1 will fly to the worksite on the robotic arm and begin the release of two bolts.
EV2 will translate along the truss to this worksite and assist EV1 with release.
EV1 will retrieve the spare antenna from its housing
and the robotic arm will fly back to the install location on the Z-1 truss.
EV2 will translate back along the truss the same way they came passing by the airlock on the way.
With that the worksite the crew will work together to get the antenna seated and installed on the
boom. Next the two crew will release and remove the two locks from the spare antenna's gimbals
and install a thermal cover. EV2 will retrieve the failed antenna from its temporary stowage
location and pass it off to EV1. EV1 will carry the failed antenna outboard to its long-term
stowage location. EV2 will work to clean up the Z-1 worksite before heading back outboard.
EV2 will drop off the tool bag at the airlock before continuing translation to the failed
antenna install. The crew will work together to get the failed antenna stowed and two bolts
installed. Once the failed antenna is stowed, EV1 will maneuver to the same location
they ingress the robotic arm from. EV2 will begin translation back to the airlock
and prepare for crew ingress. EV1 will egress the robotic arm and remove the foot restraint
which they will be stowing on an equipment platform nearby. EV1 will then translate back
to the airlock where crew will ingress the International Space Station with their tool
bags to finish out their planned six-hour and 30-minute EVA. All right, thank you. Just to
close out, I'll add that for this EVA we've got a fantastic team of folks on the ground
supporting it who did all the development to figure out how to do an antenna removal and
replacement. That team is composed of Anne McClain, our spacewalk communicator, who will be
talking to our astronauts outside. She's a NASA astronaut. Our CAPCOM will be Stephen Zentor,
and if you could show the graphic for this, that would be great. Our CAPCOM will be Stephen Zentor.
He'll be talking with the astronauts inside the space station as they control the robotic arm
and support the crew outside. And our EVA team is led by Sandy Fletcher, and we're all looking
forward to a successful EVA. So with that, hand over to Chloe who will talk the last EVA in August.
Thank you very much, Chris, and thank you all for your attendance and interest today.
I'm going to start off talking about the team for this EVA which we've titled the Triple Jump EVA.
It is an upgrades EVA. So these are items that are things we will want to get done.
It doesn't necessarily have a high priority to get done today, but we've got a great opportunity
to get it done. So with that, this EVA has moved around quite a bit. So I'd really like to thank
the entire Triple Jump team for handing over a really great EVA timeline to me and to the
former lead flight director, Heidi Brewer, who is now our increment lead flight director.
So I will be taking over the task from her. So we can go to the team slide for EVA 98.
The team includes our ground IV who will be the main voice of the crew during the EVA,
is astronaut Mark VandeHei. He's been in training the entire time and working with the team as it's
progressed through the timeline. Our CAPCOM who will be talking to the crew inside is Tess Caswell,
and our lead EVA flight controller is Sandy Moore, and our main task is Tanner Burns. I'd
like to thank them for all the work on the timeline. So this really is almost two independent
timelines between our EV1 and EV2. As you saw for Chris's EVA, the team is working together
really closely on one main task. This one, we have a lot of things that we'd like to accomplish,
but we do have a couple priority items. The first one being the NO2 forward retroreflector.
This is going to be performed by EV1. There are reflectors around station which are used by
visiting vehicles to help with the relative navigation as they're approaching its targeted
docking port. So we have noticed some residue buildup on these retroreflectors over time
from thruster combustion products from our visiting vehicles, so they do need to be replaced
because sometimes the vehicles cannot lock onto them. The NO2 zenith was replaced by Sonny Williams
during increment 72. That was done at the, like I mentioned, the zenith port. For us, there is no
visiting vehicle on this port. When she did hers, there was a visiting vehicle there, so I'd say
it's going to be a little bit different for us, but hopefully a bit easier. Next priority is related
to the alpha magnetic spectrometer payload, or AMS. This was launched in 2011 on STS-134.
Over time, with the thermal environment changes that occur in space, this has caused materials
to relax over time so that the radiator is no longer firmly up against the power units inside
of AMS. So we are seeing a decrease in our heat rejection capability on AMS. There is 46 bolts
that EV2 will be going ahead and torquing down to try to bring those two pieces of material closer
together to help the heat rejection and to help continue the lifespan of AMS. This one, the crew
member will be on the robotic arm, which means the two crew members who are not on the spacewalk
will be inside manipulating the arm for that crew member. There are also what we call AMS guide studs
that we are going to be adding to the corners of where those 46 bolts are. This is going to allow
us to install a new radiator as we do some AMS upgrades, which will occur in the not-too-distant
future. And then finally, why the EVA is called TripleJump, we are going to be connecting jumpers.
We have electrical as well as some fluid connectors that are going to help station.
So the electrical jumpers, we are going to install one at S4 and one at S6. This is going to help us
just improve our redundancy in the event there is any type of failure within our power systems
on station. The other line that we will be installing is for the photovoltaic thermal
control system, or PBTCS. This is what we use to cool electrical components out at our power
channels outside of station. So we will be installing two jumpers. They are going to have
nitrogen in the lines and they will be set up for a future EVA where we are going to go ahead and
push ammonia through these lines to give another radiator path for cooling for station. So with
that, there are a couple other tasks that you are going to hear about in the animation. I won't get
into those details. Instead, I will cut it right over to the production team to go into the animation.
U.S. EVA 98 will begin at the Quest airlock. European astronaut Sophie Adnote, EV1, noted by
the red stripes, will egress first and perform some bag swaps, temporarily stowing them on the
outside of station. She will then receive her bag for her first task, stow on her BRT, temporarily
hold Jessica, NASA astronaut Jessica Meir, as she egresses, help her install on our BRT, and close
the airlock. EV1 Sophie will then head on out to the Node 2 forward reflector worksite, pausing
temporarily to drop her Fairlead hook, and then heading out to the international docking adapter.
She will pause momentarily to pull a lever aft and take some photos, stow her bag, and prep for
reflector release. There are three Fairchild fasteners, released by hand, carefully to not
strip them. She'll stow that reflector in a wipe to protect the reflector back inside, and then
install the new reflector. Again, three Fairchild fasteners, and then remove a tape cover, stow that
all back in the bag, and then she'll head back in board, pausing momentarily to re-engage the
safing, apply power to the international docking adapter, and back to the airlock. She'll stow a
tool needed in a different task in a different bag. Meanwhile, Jessica's going to head outboard
to S1, stow her large over U bag with the high def camera, and prep for arm setup.
The Lee will meet her at S1. She'll install the foot restraint, retrieve her large over U bag,
and ingress the SSRMS for a maneuver over to the S1 lower outboard external high def camera.
We'll temporarily stow a round scoop, and a lens cover to protect our camera during the remove.
Jessica will then release three cables, a WAP cable, and then a power and data cables. She'll
temp those to the side, and then she will release the camera off the ratcheting bracket by flipping
a cam lever. The temp stow on the outside of her bag while she retrieves the spare,
and installs the spare, and then power and data are applied, followed by the WAP cable. Retrieving
the hardware from the new, looking at the cable routing, and then back to S1, where she'll egress
and head back to the airlock to stow the large over U bag, protecting the thermal clock of the
camera. She'll retrieve a Kulak bag needed for her AMS activities, head back to her location at S1,
and re-ingress the SSRMS. From there, Sophie's gonna stop at the airlock, drop off her bag and
her PGT while retrieving a microorganisms caddy. She's gonna do a couple of different experiments
looking for extremophiles on the outside of station, including handrails, her gloved hand,
the thermal cover, out here in the lab at a CO2 vent,
and the final swab back in the airlock. She'll test the service and cooling umbilical,
and then drop off everything, retrieve her pistol grip tool, and her new Kulak bag.
From there, Sophie's gonna head all the way outboard past the Sarge, momentarily dropping
her green Fairlead hook, and then out to S4, where she's gonna work on the integrated equipment
assembly, releasing and reapplying a lower torque. This will allow for robotics, remove and replace
later if ever needed. Then she'll stow her tools, retrieve her bag, and continue outboard.
Meanwhile, Jessica's gonna take an amazing flyover, the S1 truss, over to the AMS worksite,
where she's going to drive 46 bolts to pull the wake radiator in tight to AMS,
while Sophie works on her DDCU jumper out at S4. To do this, she's going to remove a couple
caps from a dummy panel, reposition connectors, and apply a very large jumper. This will give us
some redundancy in the impact of an electrical issue on orbit. She'll then reposition to the
lower side, because it is a long jumper, move the cable to the dummy panel, and do the other side
of the jumper. From there, she'll clean up her worksite and reposition for her next activity.
Meanwhile, Jessica's at AMS, and she's going to break and remove four corner bolts. This allows
for up to four AGS, or AMS, guide studs to be installed temporarily by hand, and then followed
with a torquing with the pistol grip tool. If needed, she'll reposition and do the next two,
again breaking, torque, and releasing them fully, and then fully installing
two additional AGS, at first by hand, and then by pistol grip tool. She'll then take another
amazing ride back and around over the truss to meet her egress position at S1. She will egress,
temp stow her large OU bag to allow her to clean up the foot restraint
from the SSRMS, stow it on the port seat of cart,
and then she'll retrieve her crew lug bag and head out forward to join Sophie.
Meanwhile, Sophie has finished her electrical jumper task, and she's headed to her second
electrical task. This is a simpler DDCU activity where she'll install a short jumper.
Meanwhile, Jessica will head outboard for a fluid jumper. She's going to pause at S5, S6,
pull back a jumper which is filled with nitrogen, and install for a future
radiator fill of ammonia. After completing her electrical task, Sophie will pause one more time
to do one more jumper. Again, this is a fluid jumper filled with nitrogen. She's going to cross
it over S6 to S5 and allow for the future radiator fill. Both crew will meet back at the
airlock for a successful conclusion of EVA 98. And again, with these EVAs, more information
including its participants will be shared as we get closer to the events themselves,
so be sure to tune in to nasa.gov for more information on these upcoming EVAs that are
coming up here in the month of August. But again, talking right now about U.S. Spacewalk 98,
and I want to give it back to Flight Director Kool-Ai Maring for any additional thoughts.
Yep, just to follow up on the couple tasks that I did not mention prior to the video,
one of them is the EHDC that is one of our high-def cameras. We're replacing it because
right now it can only take still videos, or still images, and it cannot stream video. So
by doing this, we'll be able to get that video streaming capability back, which does help for
some of the robotics operations. Not required, but it's a little extra view. And the microorganisms,
this is the second time we're performing this payload. There were some interesting results
I know from the first one, so we wanted to go ahead and do it again to see if we got similar
results or something different. So that's why we'll be doing MicroOrg 2. And Joseph,
I'll hand it back to you. Thank you to Bill, Chris, Chloe for providing additional details
on these upcoming spacewalks that again will be happening outside of the International Space
Station throughout the month of August. And for more information on those again, be sure to visit
at nasa.gov and we'll have the broadcast live on NASA+. We're now going to transition to our
question and answer session for the media that are participating on our phone bridge. If you wish to
submit a question, you can do so by hitting star 1. If your question has been answered, you can
redact it by using star 2. We have media here in the room here at Johnson Space Center, and we'll
Thank you. I'm Mark Carrillo with Aviation Week and Space Technology. I have some
AIROSA questions. I think you said for the 3B power channel, the seventh will be launching on
SpaceX cargo this fall. You didn't say any clearer than that, I don't think. So what I'm asking is,
will the other last AIROSA go with it or will that launch later? And what power channel will
the eighth one go to? And when do you think you'll complete all of the AIROSA work? Sure. So
they fly in pairs. So we'll get two solar arrays flying together on one pallet in the Dragon trunk.
And then we'll replace the 2A. The 2A array was the other one that we have to go put this in. And
then the 3 Bravo. And so we will do both of those during spacewalks during that mission.
And just to be clear, I said, I think the two channels you said are 3B and 2A, but you'll do
2A first. And then 2A has been prepared, I guess. 2A has already been prepared. We did that on the
last mod kit EVA that we did. And so 3B is the last one that we have to get prepped. And so
the other six channels on ISS have already had their solar arrays on, the AIROSAs on them.
And I'm sorry to ask, just to be clear. So will you, I mean, this has gone on for several years
and it's complicated and all, but it's working. And so I'm just wondering if you have kind of a
estimate of when you think the final one will be rolled out and you'll be finished with this?
Oh, yeah. So they get, when they get delivered this fall, I'll tell you, it's on space. I mean,
you guys can do the math. It's SpaceX 35. They, we will conduct the EVA. Our plan is to conduct
the EVAs during that mission to install those two solar arrays. And then we will be complete
and we'll get them rolled out during that. There are opportunities if we run into any sort of
issues or things that that could be delayed to after the SpaceX 35 mission if we had to,
but our plan today is to do it during that mission. So we'll do the EVAs there to install
those solar arrays and then they roll out at the end of each EVA. Yeah, correct. During the fall.
Thank you very much for your question. We'll now transition over to our phone bridge. And again,
for media that wishes to participate and that are in the queue, you can use star one to submit your
question and star two, if it has already been answered. And we'll kick things off with Bill
Harwood of CBS News. For Chloe, I just want to verify that Sophie and Jessica are EVA 98 since
I hadn't seen that announced anywhere. I just want to make sure that's true. And for Bill Spetsch,
you know, Kelly Ortberg said recently, the Starliner is doing very well. He's working
with you guys about scheduling. Is it going to be possible in your mind to get a cargo
flight off before the end of the year? Or do you think it's more likely to slip into 2027? Thanks.
Well, let me let me take that. So, you know, we'll announce the actual the will announce the crew
members for the EVA closer to the EVA. I know it was in the video there that we we just talked
about, but we'll, we'll actually make the formal announcement coming up on who will do those EVAs.
We, we like to keep an eye on what what happens over the course of the EVA. So we don't have to
jostle things back and forth. As far as Starliner goes, we continue to work very closely with Boeing
on the Starliner upgrades. I would say the teams are working really well together to make good
progress and that we will fly it when it's ready to go and where we have a spot for it on ISS.
Thank you very much for your question, Bill. We'll go back to the phone bridge with Charlotte
Cossett of AFP. Hi. Hi. Thanks for taking my question. I actually wanted to ask the same
question about EVAs. So my understanding is that we cannot confirm yet that she will take part
in the spacewalk 98, but is there, you know, I mean, is there a plan to make her like participate
in either this one or spacewalk 97? I think the question is, is whether or not they could be
participating in either of those, those next two spacewalks. We evaluate, we'll evaluate after we
get done with this, this next spacewalk here and see where we go with, with the crew members for
the follow on. Thank you very much for that question. And again, that was our last question
that we had on the phone bridge. And again, for these upcoming EVAs throughout the month of
August, you can find out more information, including the participants for those EVAs
at nasa.gov as they are announced the first one coming up on Thursday, August 6th. A very special
thank you to Bill, Chris, Chloe, for joining us on the briefing here today. And we look forward
to seeing you on NASA plus for the upcoming spacewalks outside of the International Space
Station. Have a great day.
