LS vs HEMI vs Coyote

The Engine Story
7 followers
AI Generated·May contain errors
All right, let's talk about the American V8. Here's the thing, three engines have basically
defined modern American horsepower. The LS, the Hemi, and the Coyote. Three different companies,
three totally different philosophies, and honestly, three different religions. If you've ever hung out
at a car meet, you know people will argue about these things until the sun comes up. So today,
we're going to settle it. Not with opinions, no. We're settling it with engineering. We're going
to pull each one apart, look at how it actually works, and figure out which one deserves a spot
in your build. But before we dive into the contenders, let's back up. Because you can't
compare V8s until you get what a V8 actually is. So look at this. A V8 is eight cylinders split
into two banks of four, arranged in a V-shape, typically 90 degrees apart. Inside each cylinder
is this beautiful little violin event happening thousands of times a minute. It's a four-step
dance. Intake, compression, power, exhaust. Watch. The piston drops and sucks in a mist of air and
fuel. That's intake. Then it shoots back up to compress that mixture into a tiny pocket of high
pressure. That's compression. Now the spark plug fires, boom, the mixture explodes, and it hammers
the piston down. That's your power stroke. That's where horsepower is born. And then the piston
pushes those burnt gases out the exhaust. Now multiply that by eight, all firing in a carefully
timed sequence, and you get that deep rolling rumble that you feel in your chest. That sound
is the firing order. Literally the engine's heartbeat. And here's why we love the V8. Eight
cylinders give you smoothness and torque. Torque is that twisting force that shoves you back in
your seat. A V8 makes it down low right where you actually drive, so it feels effortless. It's not
screaming to give you power. It's just delivering it. That's the foundation. Every engine we're about
to look at follows those same rules. The difference is in how each one plays the game. Different head,
different valve trains, different personalities, same physics, wildly different results. All right,
let's meet the contenders. All right, first up, the one you've heard swapped into literally everything.
The LS. Now check it out. General Motors launched the LS family back in 97 with the C5 Corvette.
It was a clean sheet redesign of the old small block Chevy. Same basic idea, but totally modernized.
And what they ended up with kind of accidentally became the most swappable engine on planet earth.
So here's the architecture, and this is key. The LS uses what's called a cannon block design.
You'll hear it called pushrod or overhead valve. That means the camshaft, the piece that opens and
closes the valve, sits down low right in the middle of the block, tucked in between the cylinder banks.
Up top, you've got the valves in the heads. To bridge that gap, pushrods. Simple metal rods
ride on the cam lobes and push those valves open. It's almost old-fashioned, and that's exactly why
it's genius. Because think about what that does. With the cam tucked in the block and just two
valves per cylinder, the heads stay compact and tight. The whole engine is narrow, short, super
manageable. You can stuff it into engine bays that were never meant for a V8. People tracked them
into Miatas, pickup trucks, classic DMWs. I've even seen an LS in a golf car. No joke. And here's
a bonus. It's made of aluminum. Block, heads, all of it. So it's light. We're talking under 450 pounds.
That's featherweight for a V8 with this kind of grunt. Displacement-wise, the LS family runs from
4.8 liters up to a massive 7.0 in the legendary LS7. And these engines are born to be tweaked.
The aftermarket is bottomless. Cam upgrades, heads, superchargers, kerbos. The internals can take it.
The bottom end is strong, and it just loves boost. So think of the LS like that friend who's always
down for anything. Reliable, affordable, crazy capable. Not the fanciest, not the most advanced
valve train, but it makes big power, fits practically anywhere, and just keeps going.
That's why people call it the people's champion. But don't let the simplicity fool you. Up next,
we're looking at an engine born from a completely different philosophy. All right, so check this out.
Now, the HEMI, and this name, this name carries weight. Let's roll it back a bit. Chrysler's been
tinkering with hemispherical combustion chambers since the 1950s. Then in the 60s, you get the
legendary 426 HEMI. They called it the elephant engine. This thing terrorized drag strips and NASCAR
so badly it was basically pushed out. Fast forward to 2003. Chrysler brings the HEMI name back, and
So what actually makes a HEMI a HEMI? Look at the combustion chamber. Instead of a flat or
wedge-shaped roof above the piston, it's a dome, half a sphere. That shape allows two big things
to happen. First, you could put the valves on opposite sides of that dome angled apart. That
means bigger valves and a straighter shot for air coming in and exhaust getting out. Better breathing
equals more power. Second, that hemispherical shape lets you put the spark plug right at the top
center of the chamber so the flame spreads evenly. More efficient burn, cleaner combustion.
Architecture-wise, the modern HEMI is a pushrod cam and block setup just like the LS. Cam sits in
the valley, pushrods go up to the valves. But here's a cool twist. Grice gave the modern HEMI
to use spark plugs per cylinder. 16 plugs total. That helps with emissions, smoother running. It's
a clever touch. Now, the HEMI's known for being big and muscly. 5.7, 6.1, 6.4 liters. And in the
supercharged 6.2 Hellcat, that's where we're talking 700, 800, even over a thousand horsepower
in the Demon straight off the factory floor. That's insane. Think of the HEMI like an old
school heavyweight boxer who got back in the gym and came out meaner. It's beefier than than an
LS. It's wider, but when it hits, it hits hard. Real low-end torque. This is pure American muscle.
It doesn't whisper. It announces itself with that unmistakable rumble. And next, we're going to
dive into the sound and then head into a totally different philosophy for power. Now, the Coyote.
And this one plays a totally different game. Ford dropped the Coyote back in 2011, right into the
And while the LS and HEMI are keeping things simple with pushrods, Ford went in a whole other
direction. Sophisticated, modern, high-revving, and absolutely packed with technology. Here's the big
difference, and it's huge. Take a look at the top of this engine. The Coyote is running a dual overhead
cam setup, DOHC. That means the camshafts aren't down in the block, they're up in the heads.
There are four total, two per cylinder head, and those cams are opening and closing four valves
per cylinder, two intake, two exhaust, instead of the two valves you get with the LS and HEMI.
Why go complex? Well, that complexity lets the engine breathe like a champ at high RPM.
It also lets Ford do something pushrod designs can't easily do, variable valve timing. They call
it TI-VCT. The engine can literally adjust the valve timing on the fly, cruising along, and it's
tuned for efficiency. Stomp on the gas, and it opens up everything for max power. And because it can
breathe so well, the Coyote loves to rev. The HEMI and LS do their thing down low, but they run out
of breath up top. Not the Coyote. It just keeps pulling, screaming up to seven, even seven and a
half thousand RPM. It has that exotic European, almost race car vibe to it. In terms of displacement,
it's a 5.0 liter. That's the legendary 5.0 badge, nodding back to the Fox Body era. Sure, it's smaller
than the big HEMIs, but it makes its power through revs and efficiency, not brute cubic inches. Now,
there's a trade-off. All that hardware up top makes the Coyote physically wide, really wide. It's a
tighter fit in the engine bay, and a more complex design, more moving parts. Think of the Coyote as
the modern athlete. Precise, high-revving, technical, efficient. It brings finesse to a fight that's
usually all about brute force. And when you let it sing at high RPM, oh man, it's glorious. So we've got
three engines, three totally different philosophies. Let's actually compare them. All right, check this
out. We've got all three laid out side by side, right in front of us. This is where physical
reality kicks in, because the size and weight of an engine are huge factors that affect everything
from fitment to handling. Take the LS over here, see how compact it is. That's because the cam
leaps down in the block, and it only has two valves per cylinder. So the heads are nice and solid. In
aluminum, you're well under 450 pounds. That's why you see LS swaps everywhere. It just fits almost
no matter what. Now look at the hemming next to it. It's still a push rod design, so it's not super tall,
but the whole thing is just bigger. The iron block versions push past 500 pounds. You can see it's
wider than the LS, more mass all around. It's that big American bruiser that gives you torque for
days. And then the Coyote. It's only 5.0 liters, but man, see how wide it is? Those total overhead cams
and all that valve train action up top mean big cylinder heads. So even though it doesn't weigh a
ton, somewhere in the middle, it takes up a lot of real estate under the hood. That width makes swaps
in the smaller engine days tricky. When you boil it all down, the LS is like that compact athlete
who can squeeze into any space. The Hemi is the heavyweight champ, big and imposing. And the Coyote,
it's tall and broad-shouldered. Maybe not the heaviest, but it needs room to flex. And that size
isn't just trivia. It determines what cars they fit in, how the weight's distributed, how the car handles.
But hey, none of it really matters if the engine can't deliver the power. So let's dive into that
next. All right, here we go. The good stuff. Power. And more importantly, how much more power can you
squeeze out of each one? Let's talk factory numbers first. Just ballpark. The modern 5.0 Coyote,
that's, you know, around 450 to 480 horsepower, naturally aspirated. The 6.4 Hemi, the 392,
it's sitting around 485. And an LS? Well, that depends which LS we're talking about. An LS3 is
around 430, and an LS7 over 500. So stock for stock, they're on the same ballpark. Impressive,
but civilized. But here's the thing. Nobody who's really into these engines leaves them stock. The
real question is, how do they respond when you start pushing? That's where their personalities
really come out. Let's start with the LS. The LS is the modificational king, full stop. The bottom
end is strong, the desire is simple, and the aftermarket, infinite. Bolt on a cam and some heads,
boom, instant big gains. But the real trick, boost. An LS embraces a supercharger or turbo
like it was born for it. People are making four-figure horsepower on stock LS bottom ends.
It's almost unfair how much abuse these things can take. Dollar for dollar, no engine gives more
power for less money. And the Hemi, you know, the Hemi's party trick, it showed up to the party
ready to fight. The Hellcat engine, supercharged 6.2, making 700 plus horsepower right off the
showroom floor. The Demon put to 800, the Demon 170 cracked 1,000. Christ basically modded it for
you. And if you still want more, a pulley swap, a tune, and it responds like a champ. It's brute
force engineered from day one. Then the Coyote. The Coyote is a different animal. Naturally
aspirated, it's a rev-happy machine. It loves to spin. But add force induction and those dual
overhead cams, let it breathe, bake, supercharge, interslide upon a turbo, and the power gains are
massive while it revs to the moon. The catch, it's more complex. There's more going on inside and
it's tighter in the engine bay, but the ceiling, very high. So think of it like this, the LS is
your cheap bulletproof canvas. You can do anything to it. The Hemi, it's the factory brute. Massive
power straight out of the box. The Coyote, that's the high-tech overachiever. Revy, sophisticated,
and hungry for boost. All three can make absurd power. They just charge you different currencies
to get there. Money, complexity, simplicity. And remember, power is only half the experience.
The other half, you hear it before you see it. All right, let's talk about the thing that actually
makes your neck hair stand up, sound. Because these three engines do not sound alike, not even
close. The Hemi, this is the classic American muscle rumble, right? Deep, lopey, aggressive. I'm
picturing that uneven thumping idle that basically says, I could hurt somebody. It's low, it's mean,
and I'm telling you, it's the sound of a challenger pulling up next to you in a light. When folks close
their eyes and imagine a muscle guard, they're hearing a Hemi. Now, the LS, it's got that hot
rod bark. A classic throaty, small block, shabby growl. Especially once you throw a cam in it.
That's when you get that choppy, aggressive idle. It's raw. It's American V8 to the core,
and it hits you right in the nostalgia. And then the Coyote, you wind this thing out,
and it turns down to a completely different animal. Down low, yeah, there's a nice growl,
but get it near redline, and you've got this high-pitched exotic whale. It sounds expensive.
It sounds like a race car climbing toward a train. This one's the sophisticated one, for sure.
Now, let's get real about reliability, because what's the point of horsepower if you're stranded
on the side of the road? The LS, that thing is famously bulletproof. Simple design, fewer moving
parts, and decades of proven durability. There are LS engines out there rolling around with 300,000,
400,000 miles. It's pretty much the gold standard for just works. The Hemi, also strong and durable,
although the modern ones have their little quirks, like those lifter and camshaft issues people talk
about. But the base architecture is tough. These engines can take a beating. And the Coyote,
impressively reliable considering how complex it is. Ford engineered it well, but that's the
trade-off with sophistication. More cams, more valves, more timing components, more things that
could eventually need attention. Simpler engines just naturally have fewer things to go wrong.
Bottom line, fewer moving parts usually means fewer headaches. That's the pushrod advantage
the LS and Hemi have. The Coyote trades a little of that simplicity for performance and refinement.
None of them are unreliable, but they each ask for different kinds of tear. Which one's right for you?
That depends entirely on what you want to do with it. All right, so three engines, three philosophies.
Let's bring it home and actually answer the question, which one should you choose? Because
the truth is, there's no single winner. There's a winner for you. Let's break it down by what you're
trying to build. If you want maximum power for minimum money, then you're itching to swap a V8
into something wild. The LS is your engine. It's compact, it's light, it's endlessly moddable, it's
cheap to make big power, and it fits in anything. If your dream is a sleeper, a track car, a drift
missile, an insane engine swap, start with an LS. It's the people's champion for a reason. Now, if
you want raw, brutal, straight-line muscle car attitude, and you want it to sound like the devil
clearing his throat, the Hemi is calling your name. Especially anything supercharged. Big power,
big torque, big presence, factory-warrantied insanity. This is for the person who wants to
smoke the tires and make a statement doing it. It's American muscle in its purest, angriest form.
And if you want the most modern, technical, high-revving experience, an engine that's
happy commuting quietly but transforms into a screaming exotic when you flatten the throttle,
the Coyote is your pick. It's the sophisticate. It revs, it sings, and it handles well because
of that character, and it makes awesome power with a little of refinement the others don't
quite match. So here's how I'd sum it up. The LS is the versatile do-everything champion,
the Hemi is the brute force muscle legend, and the Coyote is the high-tech precision screamer.
Now, is there a best engine? Honestly, no. And that's the beautiful Bart. These three exist because
there are three different kinds of enthusiasts. The engineer who loves elegant simplicity.
The bruiser who lives the torque and noise. The technician who craves revs and refinement.
There's a VA here for every single one of them. So the real question isn't which engine is best.
The real question is, which one are you? Drop it in the comments. Tell me what you're building
and which one you run. And if you've learned something today, you already know what to do.
Subscribe because next episode, we're going even deeper.
This has been Redline Research. Keep it revving. We'll see you in the next one.
You're moving to the next level. Your next opponent is you.
