How to Knit a Triangle Shawl for Beginners ¦ 4 Easy Steps!

Lina Rose Knits
7 followers
1 Video View·Jul 24, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedNancy Queen from Noble Knits demonstrates how to create a large, diagonal one-skein shawl. This beginner-friendly project uses a simple bias-knitting technique, requiring only one increase every other row to create a triangular shape without the need for any decreases.
Hey knitters, in today's video I'm going to show you how to make this gorgeous shawl in just four easy steps.
Stay with me.
Hello knitters, it's Nancy Queen from Noble Knits
and I'm here to show you how to make this really large one skein shawl.
And the best part is, is that any knitter can knit this. This is a beginner project
Diagonal shawl. What the magic comes in is that you are knitting it
on the bias by just making one increase. We start here at this little corner and we just increase on one side
until you get this really large
bottom. So there's no decreasing that goes into this. And this
increase side becomes the top of your shawl. So it looks like you knitted diagonally
but really you just added an increase. And I'm going to show you how to do that
step by step in four easy steps.
So if you want to become a better knitter, click subscribe and let's get started. I'm using
Lion Brand's shawl in a ball cake or shawl in a cake. And what I like about this yarn
is that it's a self-striping yarn and
you can pull it from either the outside or the inside
depending on the color. It comes in a lot of really fun colors.
And it shows you the progression of the yarn right on the label.
So in this case, I'm going to be pulling from the outside
because I want to start with this color and work towards the longer rows being darker shades.
So I'm going to work from the
outside in as opposed to starting at the center with this little pull and working out, but it's totally up to you.
This is a worsted weight yarn also known as a number 4 yarn by the Craft Yarn Council.
So any worsted number 4 medium weight yarn will work.
But you want to make sure that you buy enough yards, yardage. So this is
481 yards.
And that's, we're probably going to use almost the entire skein. This yarn actually calls for size 8 needles.
And I'm showing straight needles.
However, I recommend that you work on circular needles, and I'll get into how to do that. It's not scary.
But the reason you want to work on
circular needles is because you're going to be having hundreds of stitches on the needle and it will make it a lot easier
In fact if you want to start on
straight needles, go ahead and start.
But by the end you might feel like you have way too many stitches
smashed on the needle and if that happens you just switch to circular. So I
will take the guesswork out of working on a circular needle for you so that hopefully you will
consider using those.
You're also going to need a locking stitch marker, a pair of scissors, and
a tapestry needle to weave in the yarn ends when you're done. So let's clear everything out and get started on this.
Like I said, I'm going to be working from the outside. So I can take this
ball band off and
just take my yarn and
get cast on. I like to leave a tail about
12 inches just to make sure that I have enough yarn to weave in at the end.
So begin by making a loop for your slipknot.
At the top of the loop you're going to bring behind your
work
like that.
And now you're just going to pull it up and
there's your slipknot.
And we'll put the slipknot on the needle
with the tail
in the front.
And you just tighten that up. Make it tight enough that it's
secure on there, but you want to also make sure that you can
easily glide your stitches on the needle. And now we're going to cast on three stitches.
In this case, we already have one stitch on the needle. That slipknot is our first stitch.
Now we're going to cast on two more.
So, I'm going to do a long tail method. I come in between the tail and the yarn ball and
then I grab the rest of the stitches.
So I have my thumb on the tail and my finger on the yarn ball yarn. And I hold this yarn to...
I hold this stitch to kind of stabilize everything. And I flip my thumb and finger back
and come in under the thumb,
go over the finger, and go back through the hole where the thumb was. And that's my first stitch.
Lean them back,
come under the thumb,
over the finger,
back into the thumb, and
tighten. So there's my three stitches.
And now we're going to knit our first stitch. So since we have a
circular needle, I'm just going to bring this over and
treat it as if it is a regular
straight needles. And I'm just going to knit that first row.
Now we are going to start with the pattern. And the pattern is
increase at the beginning of this row, and then the next row you just knit straight across.
So we're going to
increase into this first stitch. So we knit the stitch and then instead of sliding it off the needle,
I'm going to bring my top needle, my
right needle
behind the left needle. And
now I'm going to knit that stitch
and slide it off the needle. Now that was an increase made, and
you can see the increase stitch. And there's a little kind of purl bump right there
that's created on an increase stitch. And that makes it very easy to identify whether you've done an increase
if you're looking back at the rows. And then you just knit the rest of the stitches in the row.
Now we are going to knit the next row.
Okay, now we're back to an increase row. So to increase,
before I do that, I'm going to take my locking stitch marker and
place it on this side of the work so that I know that this is the side
that I'm always going to increase on. And
I use a locking stitch marker because it you can move it up as you work. It's just a little bit easier.
So now we're going to make that increase again.
So I go into the stitch,
before I take it off, I go around behind and
go into that stitch from the other side.
Now I knit that stitch and
my increase is made.
Knit the rest of the row and
now this next row is just knit.
So the entire thing is knit every row except for
that increase that you make at the beginning of every other row. So there you can get a really nice rhythm down with it.
It's going to go fast.
So I'm going to knit a few more rows and then check in with you.
There's my increase.
Okay, now I'd like to check in and see how you're progressing.
How are things going? Does your knitting look like this? It should be this
triangle shape that you're getting here. And right here you can see this is the
increase side of the work. I have my stitch marker over here to remind me that when I'm on this side, I'm going to increase.
And over here, this is just where we start a straight row of knitting.
Now what's going to happen is
this increase edge becomes the top of your shawl. So this is what your shawl is going to look like.
It's just going to keep getting bigger and bigger and bigger as you knit and you increase.
I did have a knot in my yarn, so that's why you see this abrupt color change.
But as you can see with the shawl and cake yarn,
there's a really nice transition in colors. It's really pretty to watch, a lot of fun to watch
the colors change as you knit.
So let's keep knitting.
Okay, so I am back to my final row and I just want to show you how much yarn I have.
Not that much.
I just have a few yards left and I always like to make sure I have enough to get across this really long row.
So that's what's left here on this
very large shawl, and I'm going to start binding off. I'll show you how to do that.
Okay, so you're going to
knit the first stitch,
knit the second stitch, and take the first stitch up and over that second stitch, and
then you're going to repeat that. So I'm going to knit the next stitch,
take this one up and over,
knit the next stitch,
take this up and over, and
you're just going to keep repeating this across the row.
Now what I want to let you know is make sure that you're not too tight on this, because if you're too tight,
then the overall length of that side of the shawl is going to be tight and look awkward.
What some people do if they have a problem casting off too tight is
they switch to another needle for this needle and they knit onto one
that's maybe one or two sizes larger so that they don't have that problem.
So you could try that if you feel like you're
tight. What I do is I tend to give a little extra slack and
I don't pull up after every stitch. I just kind of let it be loose. Okay, now I'm down to my last stitch.
So I'm going to knit that last stitch,
lift the previous one up and over,
and now what do I do with that last stitch?
I'm just going to take this pair of scissors and cut it leaving a four to six inch tail,
and then all you do is you can actually take the needle away,
and you're going to pull this
yarn through the loop,
and that's it.
Now you're going to weave in the yarn ends.
So I just use a tapestry needle, a finishing needle, and I'm going to weave in
in the garter pattern.
So it's kind of a duplicate stitch is what you do when you're weaving in
garter. So you can see my tail is here. I'm just going to come up on one of these stitches, and
then I'm going to follow the row of purl bumps.
So I came out here, so I'm going to go in here,
and I'm just going to keep following that.
And you do that for maybe four to six stitches depending on how much thread you have.
The idea is to have it in there so in green that this thread isn't going to come loose and unravel.
So what I do, I've done a few stitches,
and then what I like to do is I kind of like to go back the opposite direction of the stitches,
and follow that.
And that's it. Now I'm going to cut it
really close to the end of the work, being careful not to cut the work.
And you can't even see that, that tail has been woven in, and you're going to do that with your
starting tail, and if you had any breaks in the yarn, you're going to weave in those ends exactly the same way.
If you like this video, please give me a thumbs up and subscribe, leave a comment below.
Thanks so much.
