How to knit a cute summer top with 3 neckline options; Hoop Top knitting tutorial.

Lina Rose Knits
7 followers
1 Video View·Jul 21, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedPaula, a Finnish designer, teaches how to knit the \"Hoop Top,\" a customizable top-down summer garment. The tutorial covers three neckline options, bust shaping for various cup sizes, and the use of I-cord edges to ensure a professional, fitted finish using DK weight linen blend yarn.
Hello! My name is Paula. I'm a knitwear designer from Finland and in this video I'm going to show
you how to knit this hoop top. This top pattern comes with three options for the neckline.
So this one that I'm wearing at the moment has the boat neck and then there is a version for
a scoop neck, so with a little bit rounder neckline, also with stripes and then there is a
version for a v-neck. So with one pattern you will actually get three patterns. The hoop top is
available on my website paulaneats.com and also in my Ravelry store. I'll put the links here below.
The hoop top can be knitted with DK weight yarn, roughly. I have used Sonneskarn Line and also
Drops Bell for my samples and I think they're both just lovely summer yarns. So this will totally be
a quick project for your summer wardrobe. In addition to the neckline shaping there is also
short row shaping on the back, so you will get a really nice fit for your back of the top, so it
will sit really nicely. It's not difficult at all. I'm showing in this video also how to do that,
how to do the short rows, so don't be afraid of that. You will totally be able to do it. And if
you want to, you can also add bust shaping for the top. So I have added bust stars to the top shaping,
so you will get a little bit more fabric on the front of your top with short rows done on the
front side of the top. So in the pattern I have three options for the bust shaping for three
different cup sizes. There's B, D and F cup. And depending on the size you choose to do, you will
add more short rows on the front. And in the pattern you will also get instructions how to measure or
how to determine the right size for your bust darts. The whole point of making the bust shaping,
since this is quite fitted top, it has just none or a little bit of positive ease, depending on
how loose you want it to be. And I have done bust shaping for this top. You can see how it sits
on the same level. The top part is not rising like this, so if I didn't have the bust stars here,
it would rise up and the back part would be longer. Or I would have to knit the whole body longer
in order to get the right length from the front side. So I totally recommend you to try on the
bust stars and see for yourself. In this video there's also instructions for how to do those bust
stars. There is a different short row shaping for the bust darts and it's not difficult at all.
This top is knitted from the top down. You will start with the shoulder straps. You knit a little
bit of each and shape them with the short rows. Then you join them together from the back, from
here, and then you will knit the back part of it. First flat and add increases for the armholes.
Then you will pick up stitches from the front, from one shoulder at a time, and start increasing,
depending on the neckline you have chosen. You will either do first the entire neckline shaping,
join the front in flat, and then at some point start to increase it for the armholes, or you
will do them simultaneously. As for this v-neck version, you will do both at the same time.
But there are instructions in the pattern how to do that in your size. And when you have knitted
the front in flat until the armholes, you will join the work in the round and then start knitting
the hem. And depending on whether you want to do the bust darts, you will knit first a couple of
centimeters after you have joined in the round, and then you will do the bust darts, and then you
will continue in the round until the hem is your desired length. For all the edging, you will use
I-cord technique. I will show that as well in this video. For the hem, you will do it with the stitches
you already have on your needles, and for the armholes and the neckline, you will pick up
stitches and then do the I-cord afterwards. If you're making the bust darts, I recommend you
complete first the I-cord for the neckline and also for the armholes before starting the bust
darts. If you want to, you can pre-block it as well at that point, so that you know how the top is
sitting on your body and on your bust, and you will determine how and at which point you need to start
doing the bust darts. That's all about the constructions of the top before we start with
the actual tutorial, and before that, I will show you how the different necklines look on me. This is
the scoop neck version, and you can see it has a little bit rounder, deeper neckline, but it's still
quite high. Not as high as in that red boat neck version. And this is the v-neck version. I think
the v-neck is nice and not too deep and not too high. It suits this top pretty nicely. But that's
all for now. Now let's get into the actual tutorial. For this project, I recommend linen blend yarns.
The first one here is Drops Bell, and the second one is Sunnyscarn Line, and they have the same
composition, and both are DK weight yarns. For the needles, I recommend using 4 millimeter or US 6
needles, or according to the gauge, which is 20 stitches per inch or 10 centimeters. Then you'll
need scrap yarn or these needle cords, so you can move stitches around, and of course a few stitch
markers. This top is knitted from the top down, and you start with the shoulder straps and the back
piece. First you knit one shoulder strap, or the beginning of it, and then shape it with short rows.
Here you can see the shaping. Then you do the same for the other shoulder, and then it's time to join
the back piece together. Okay, so let's begin and start with the cast on. You can use whatever
cast on method you like. I recommend using the long tail cast on. You cast on the amount of stitches
required in your size, and then you purl one row before we start the short row shaping.
Now you'll start with short row shaping. First knit a three, then turn your work, and we'll make a double
stitch. Keep the yarn in front of the work and slip the first stitch onto the right hand needle without
knitting it, like this. Then bring the yarn over the right needle to the back of the work and tighten
it so that the stitch from the previous row lifts onto the needle. Then you'll purl and make one left
purled. Pick up the bar between the last stitch and the next stitch you have and lift it to your left
hand needle. Then, since we're purling this, you need to purl from the back of the lifted stitch,
and here I have shown you how you can lift it. So it might be a bit fiddly at first, but you basically
lift it and purl it to the back. Then you purl the last stitch. And that's how you do the short rows
in this pattern. I'll show you one more time how you go about on the right side of the work. So now
we are on the right side and you need to knit until you reach the double stitch that we just
made. You knit the double stitch as one stitch, or if you're on the wrong side, you'll purl. Then
you'll knit one and turn the work and then you'll make a double stitch again. And after the double
stitch, you purl until you have one stitch left and then you make one left purled stitch again,
like this. Now you have done two short rows for the shoulder seam and you'll continue until you
have done all the short rows for this first shoulder seam. This is what the shoulder strap
should look like and now you cut the yarn and go for the other one. For the left shoulder strap,
you'll cast on stitches as you did for the first one, but unlike on the first shoulder strap,
you purl and knit one row here. Then we'll start with the shoulder shaping from the wrong side of
the work and here again you'll purl first three stitches, then you'll turn the work, make a double
stitch and knit until you have one stitch left and then you'll make one right. So you lift the bar
between the stitches and knit it from the front, so this way you won't end up with a hole. So this
is a right leaning increase and after that you will knit the last stitch of the row and from here
on you will continue with the short rows as instructed in the pattern. Next is time to join
the back pieces together. So this one on the needles was your left side and on your previous
needles you have the right side and between these two panels we will cast on stitches.
Here you can use again long tail cast on or your preferred cast on method and you'll cast on
stitches as many times as said in the pattern. Now all stitches have been casted on and it's time to
join the back pieces together and that happens just by knitting the other shoulder seam stitches
onto the same needles your right side facing up. From here you'll knit eight and then you will make
a double stitch and start the short row shaping for the back piece as a one piece. To avoid fiddling
with two set of needles I recommend moving your last stitches from the row to same needles
so you can use just one set of needles for this part of the work, makes it a lot easier. So you
turn the work, make a double stitch and purl all the way back to the first double stitch you will
encounter on the other shoulder strap. So purl all the way across the casted on stitches and then
when you encounter the double stitch you will purl that together as a one stitch. And here is the
first double stitch, you will purl that or if you're on the right side you'll knit it as one
and then you knit one or purl one and then turn the work and make another double stitch.
And like this you will continue shaping the back piece with these short rows as many times as the
pattern recommends for your size. So you'll go back and forth purling and knitting the back piece until
all the short rows have been done. Here I have made all the short rows for my size and this is
how the back piece looks now. So here will be the neckline and you will continue knitting in stockinette
stitch without increases for a while for the back piece and then start increasing for the armholes.
Here I have worked the back piece in stockinette stitch until it's time for in my size to start
making increases for both sides of the work. From here on you will make increases in the beginning
and at the end of the row on every right side row. Increases are made after three first stitches of
the row and before the last three stitches of the row. You can add stitch markers here if that helps.
At the beginning of the row knit your first three stitches and slip your marker if you have one
and then it's time to increase and first you'll make one left since we want a left leaning increase.
So you will lift the bar between the stitches and knit it through back loop like this. Then you'll
knit the entire row until you have three stitches left. Now we're at the end of the row before the
marker you will lift the bar and make one right so we want a right leaning increase here before the
marker. Then you will slip the marker and knit those last three stitches and you will continue
like this increasing on the right side of the work until all the increases are made for your size.
Here I have worked all the increases from my size and it's time to cut the yarn and continue with
the front piece. For the front piece you will pick up stitches from the cast on seam and start working
increases first on the right side and then on the left side. Here I have put my back piece stitches
on hold on a stitch holding cable and now I will pick up stitches from the cast on edge from my
right shoulder panel. You'll start picking up stitches from the cast on edge. Make sure to pick
up both legs of the stitch so that you'll get an even seam for the pickup line and then you'll pick
up as many stitches as set in the pattern. Then depending on the pattern you're making, so if
you're making a v-neck you have different amount of increases than for the scoop neck or the boat
neck, so depending on the pattern you will knit additional rows here in stockinette without any
increases yet. Here I'm making the boat neck version and for this one I have now made all the
stockinette rows and I will add a stitch marker three stitches from the neckline edge. This will
be my first increase row on the right side of the work and I will knit until the marker and then I
will make one right since I want a right knitting increase. Then I'll slip the stitch and knit the
rest of the row and from here on I will make increases only on the right side of the work
as many times as the pattern says and on the wrong side of the work I will purl. Depending on the
neckline you have chosen you will have different amounts of increases on the neckline. Here I have
done all the increases for my boat neck and I will leave these stitches on hold and continue to the
left side of the front panel after which we will join the front panel at the neckline. Here I have
done all the increases for the left side and it's time to join the front panel and cast on stitches
on the wrong side of the work and here again you can use your preferred cast on method and
at this point you can also remove the stitch markers from the neckline and cast on all the
stitches you need for your neckline and after casting on all the stitches you will simply purl
all the other side stitches to the same needles and that's how you have joined the front piece
as one. Next you'll start shaping the front piece as you did for the back piece so you will continue
in the second stitch without increases for a while and then depending on your size you will start
increasing in the similar manner as you did for the back piece. Here I have done all the front
piece increases and it's time to join the whole work in the round and join the body by casting
on stitches for your underarms and then knitting all your back piece stitches to the same needles
and then casting on stitches for your other underarm and then you have joined the work in
the round. After joining the body in the round if you like to make the bust starts, so bust shaping
for your top, I recommend knitting roughly two to four centimeters and then start placing the
bust starts for your knit. For the bust starts I recommend placing removable stitch markers onto
your work so as you can see here they are on the front of the body and between your bust and your
armpit. So depending on the size or the cup size you want to make the bust starts for, in this
pattern I have examples for B, D and F cup. It depends on the size how many markers you need to
place on the front side of the work. These markers will tell you when to basically make a double
stitch and turn the work so that you will knit back and forth making extra space for your bust
with short row shapings. To make the bust starts you will knit from your first armhole all the way
down to the second bust and to the first marker. In the pattern it will say which one of the markers
it is. You will remove the marker and make a shadow wrap. You'll pick up the right arm of that first
stitch, then you will knit it and move it back to the left hand needle. Now you have made the first
shadow wrap turn. Now you'll turn the work and purl all the way until you reach the next marker
which will be on your second bust. So that was the shadow wrap turn on the right side of the work
and now we are continuing to the wrong side of the work and I'll show you how it's purl. Remove
the marker when you reach the spot where you're supposed to do the shadow wrap turn on the wrong
side, then slip the first stitch to your right hand needle and with yarn in front take the leg
underneath it and purl it. Then slip both of the stitches to your left hand needle and turn your work.
Now you have done both sides of the shadow wrap short rows, so on the right side and on the
wrong side of the work, so purled and knit versions and you will keep on making these
shadow wrap turns on the front of your body as many times as you have stitch markers marked on
your body. As you continue making the shadow wrap turns you will remove eventually all the stitch
markers from your front side and this is how the bust starts will show in your work. So there are
these quite seamless vertical lines next to your armpits and now that all the bust starts are done
you will continue knitting in the round without any shapings until you have knitted the desired
length for the body and you are ready to make the I-cords for the hem. The I-cords are worked in the
same way for the neckline, for the armholes and also for the hem. For the neckline and for the
armholes you need to pick up stitches but for the hem you just use the stitches you have on the
I-cords in a similar way. Here I have already done the I-cord for the neckline and next we're about to
make the I-cord for my first armhole. You'll start by picking up and knitting your stitches for the
armhole. So take your working yarn and start picking up stitches from the middle of your
armhole and the recommended rate for picking up stitches is to pick up and knit two stitches for
every three stitches or every three rows and with this rate you'll go on and pick up and knit
stitches for the entire armhole until you reach the point where you started. Now I have picked up
all the stitches for my armhole and it's time to cast on two stitches since this is a two stitch
I-cord and you will cast on those stitches onto your right hand needle like this. After you have
casted on those stitches you will move those two cast on stitches to your left hand needle like
this and now you'll start the I-cord by knitting the first stitch and then you knit the second
stitch you casted on but you knit it together through the back loop of the next stitch you have
picked up on like this. Then you'll move the two stitches back to the left hand needle, knit the
first stitch and knit the second stitch and the third stitch through the back loop and then move
it back to your left hand needle and start all over again and by repeating this you will go through
all the stitches you have picked up for the armhole until you have two stitches left. These two
stitches you will just bind off and cut the yarn. Then the last thing to do is to graft the ends of
the I-cord together so using your tapestry needle you need to go on and graft those two ends together
so pick up two legs on the same side of the I-cord as your cast off edge then pick up two legs from
the same side from the other side of the I-cord, tighten and then go to the next two legs of the
next two stitches and go back and pick up the next two stitches from the beginning, tighten
and then weave in the ends to the back side of the work. This way you'll get a neat finish for
your I-cord. A little note on the I-cords overall, the tightness of the I-cord affects the fit of the
neckline and armholes so for a looser fit work the I-cord loosely, for a tighter fit work it more
firmly so even though the pickup rate for the stitches is the same depending on your gauge and
how tight you knit it might affect the I-cord so be aware of how tight you're making the I-cord
as you go and if needed pick up more stitches or pick up less stitches depending on your gauge
and when it comes to the hemline I-cord you do the same thing as you did for the armholes and
the neckline but you already have the stitches on your needles of course so you go on and cast on
two stitches from the beginning of the row and then start working the I-cord as you did for the
neckline and hem so it doesn't differ that much, you already have picked up the stitches so it's
an easy way to go. And that was the tutorial for my hoop top, the pattern is available on my web
store and also on my Ravelry store. I'll put the links here below. I hope this tutorial was helpful
and that you will knit as many hoop tops as I have. Bye!
