All right, so the first operation on this titanium suspension upright is complete.
Dana did a great job removing all the material. The surface finishes are absolutely beautiful
and now we got to flip it over and 3D contour surface the entire part. Then we're going to
take it down to the leg department and then Tyson will pop in a few o-ring grooves completing the
part. So today I'm going to show you a cool technique. I got some partners and they are
awesome. There's a company called Mighty Bite and these guys at Mighty Bite create clamps,
special clamps, machinable clamps. They clamp onto odd surfaces. This part has an odd shape.
So what we did is we went to the Mighty Bite quick change pallet system. Here's the pallet that we
made. This guy right here is a Mighty Bite ID expansion clamp. It's going to expand inside this
diameter locking it in place. So basically we're taking this guy right here and we're dropping it
down. In machining this plate we machine the profile of the part within like a thousandth
so we can lock the part right down inside and it can't move. It's low enough so no tools are
going to hit it and it's going to keep everything perfect. This bad boy right here drops down.
It's got a wiggler right inside. The expansion clamp expands so as it goes in it forces it out.
So I grab this guy right here. Boom. That's it. Thousands of pounds of force.
Grab these little guys. Two expansion clamps right here. Drop this guy in. Done. This guy in over here.
Turn it. Boom. We're ready to go. I got these handles right here. No matter what you do that
part cannot come out of here. Alright so we're locking this plate right here. Right over the
four pins. Drops down. Already solid. We got the two diamond precision pins that come up and
orientate this plate perfectly with intense. Now I grab my t handle right here. My hex
wrench. I'm going to tighten this bad boy down. These pins also as I tighten them they're expanding
inside. So since the entire plate is precision cut and each diameter is precision as it expands it
just locks it in place. There's nowhere it can go. That's it. It's 100% rigid. Ready to go.
We're ready to cut some titanium. Boom.