Making Pots In A Heatwave

Artistic ceramics
10 followers
1 Video View·Jul 20, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker explains the technical challenges of producing ceramics during a UK heatwave, focusing on the rapid drying of clay and the inability to operate a gas kiln in extreme temperatures. He details methods for maintaining clay consistency and discusses long-term studio adaptations to manage climate-related production halts.
Making ceramics during a heat wave isn't something I'm particularly used to.
In the UK, for much of the year, we're generally used to making pots in weather that's either
very cold or is relatively mild. Thus, the last couple of weeks, which have been fluctuating
between 30 and 35 degrees celsius, has sort of changed the way that I make pots, and that's
what I want to discuss at the start of this video. I'm starting a new making cycle, or at least I'm
trying to in this weather, and I recently made and fired this very simple angular vase,
which I really like and I want to make some smaller versions of. I don't want them to all
be identical, thus I threw them so that the room section varies in height between them,
and as soon as these simple forms were approaching leather hard, I wrapped them in plastic and kept
them sprayed with water. The thing is, clay will dry out rapidly if left exposed in hot air,
and with a fan in the workshop blowing that all around. It's really easy to be caught out,
and for your clay to dry too quickly, thus making things like trimming almost impossible,
or at least it changes it from being a really enjoyable task into one that's really frustrating
and very dusty. As the clay is so firm, it only comes off in tiny shards, and you have to use an
excessive amount of force with the turning tools in order for them to bite and turn the material
away effectively. When it's this warm, I become very aware of all the pots in the workshop,
and I constantly check them in a way that I wouldn't do in say the winter months,
where I can be sure that a pot can sit out exposed for most of the day without drying too much.
Whereas in this weather, everything is monitored all the time, and everything is covered in
plastic and kept sprayed with water in order to keep the pots workable. It can feel a bit
like a race against time, especially with pots like this that are thinly walled,
and already need to be on the firm side of leather hard, as I prefer to trim in this state,
as compared to the softer side of leather hard, which many others prefer. The thing is with
trimming, there's a sweet spot, but that sweet spot is sort of a spectrum. There's the softer
side of leather hard, and the firmer side, but provided you're within that spectrum, the process
of trimming itself isn't that difficult. Whereas as soon as the clay becomes too hard, you begin
to encounter a number of issues. The first and foremost is that the material begins to cleave
away in tiny shards, as opposed to longer ribbons. This means the process is dustier,
and it's actually a bit harder to achieve neat, even surfaces. But the worst thing about trimming
clay that has dried out too much, is that you have to apply much more pressure in order for the tool's
blade to catch. This really drastically increases the chance that you might destroy the pot during
the turning process, especially if you're using tools that are on the dull side, such as looped
steel turning tools, that tend to be far less sharp than the tungsten carbide variety I typically
use. So, if it is a really hot day, I'll keep all the pots that are waiting to be trimmed wrapped
underneath plastic, as obviously, if each piece takes say five to ten minutes to trim, as I work
my way through the pots, those that are waiting will progressively get drier and drier if they
are uncovered. Thus it's best to keep them wrapped up if possible, or stored away in something like
Essentially, when that waiting work enters that spectrum of being the perfect state of
leather hard, you need to wrap them up and put them into a state where they essentially freeze.
You don't want them to dry out any further, and thus you're sort of halting the drying process
altogether, so they don't run away from you and become unworkable. With that being said,
if pots do become too dry, and you can normally see this when their edges start to turn white,
and the pieces themselves become very brittle, there's a few things you can do to rectify this.
The first thing is to obviously just dunk them in water, and then set them aside to dry.
Depending on how dry your pots are, you might have to do this a couple of times,
but provided the piece didn't turn completely bone dry, this should save most pots if repeated
a couple of times, and then wrapped up in plastic so the piece can sort of hydrate again. You may
end up making the clay softer than intended, but that's much better than it being too dry to work
with. The other thing you'll see me often do, is this. I take a soaked sponge and I run it over
the surface. This doesn't dampen the entirety of the wall, unless it's very thin. Instead,
it just softens the surface, which makes it much easier to achieve a neat, even finish,
via burnishing, for instance. This method of wetting the surface, trimming a bit,
wetting it again, and then burnishing it, works really well, provided you don't go overboard.
But if you keep repeating this, and the walls become thinner and thinner, there will come a
where they just crack or bow inward extremely easily. There's also the fact that the drier the
clay is, the more brittle it becomes, which again, just makes the likelihood of failure much higher.
The good thing is, on some parts of the pot, such as the base on this piece, as I trim into it,
I'm revealing softer clay that's on the inside. This means I can be a bit more aggressive with
my turning here, hollowing out the foot with much more pressure than I would ever use, say,
towards the rim of the piece, where it's both drier, but it's also a weaker section of the pot,
as that's where the aperture of the vessel is, and therefore there's nothing gracing the walls
of the piece. Whereas down here, the fact that that thicker base spans the walls really strengthens
the object, which again means, to some degree, I alter the amount of pressure I use on the object,
based on how dry it is, but also where I'm trimming on the pot itself.
The last thing I do is just sponge over the exterior surface. This knits it together and
creates a smoother finish, which should hopefully help my glazes settle onto it better. And those
white bats you see the pots placed upon are incredibly smooth and don't warp at all,
making them a great place to dry the pots out on, as there's no texture that can imprint on
the bottom of the pot, and the piece, as it shrinks, can also slide over this smooth surface
really freely, without snagging on anything that could potentially cause a distortion.
My whole approach to making pottery sort of changes in a heatwave. Instead of making much
larger batches of pots, which is what I should be doing at the moment, I instead work on much
smaller groups to make things more manageable. As it stands, I'm already having to wrap up tons of
different pots in plastic throughout the day, juggling all these different batches and monitoring
them. If these batches suddenly exceed a few hundred pieces, it can feel really unmanageable.
So instead, until things cool down a touch, I'll be working on one-off pieces in smaller batches.
Although it has made me think about the future of making, as if these sorts of heatwaves continue,
I'll definitely be building a proper damp cupboard, which is essentially a stillage
that has a frame around it that's lined with taut plastic, bottom, sides and top.
On the floor of the damp cupboard, you can then fill up a few trays with water,
as this way as it evaporates, it creates a humid, damp environment that keeps any
pots that have slid into the stillages at the same consistency until they're taken out again.
You can even line the floor of the damp cupboard with bricks or plaster, and then every couple of
days you just pour some water over them with something like a watering can. Provided this
environment is really properly sealed, pots placed into it can stay leather hard pretty
much indefinitely. I sort of do this anyway, but it's with an impromptu canopy of sorts that's
assembled over the pots themselves, and it's always a bit of a pain to put up and put down,
whereas it's much neater and more efficient to have a purposefully built cabinet of sorts that
serves this function. Either way, when I do eventually find my next workshop, which is
something I'm tentatively looking for, I'm definitely going to be more purposeful in how
the workshop was set up. As to be completely honest, when I moved into this studio, as it
was my first workshop, I sort of just positioned things at random, and I've been working around
them ever since. But, given I've now been working in here since 2019, and during that time my work
itself has actually changed a lot. The way I position things, such as the damp cupboard, my
workbench, the wheel, the kilns, and so on, will be done with a far more considered approach that
actually helps my productivity. Anyway, the last thing to really think about when making pots in
hot weather is how they dry out after you've trimmed them. For example, the way I dry these
small vases out will be very different to how I dry mugs out, which have the addition of a handle,
or the bowls you saw at the start of this video, that have angular shapes in a very tall footring.
The great thing about these small vases is whilst having a slightly complex angular shape, there's
no additions of clay to the piece. There's no lid, no handle, no spout, and the footring itself is
relatively short. This means that I can actually just leave these pots out, exposed. They're really
thinly walled at this point, so provided I leave them somewhere where air can get all the way around
them easily and evenly, they should dry out without warping or cracking or anything. Whereas
if I was making mugs in this heat, forms where soft clay is attached to leather hard clay, I'd be
drying them out immensely slowly under layers of plastic and sprayed with lots of water, and the
bowls that I make with tall feet, whilst they don't have to be excessively sprayed with water,
I will wrap them up tightly, as what happens is the walls tend to dry out very quickly,
whereas the tall footring traps humid air underneath it for much longer, keeping that
part of the pot damp and soft, whereas the very thin walls that are entirely exposed to the air
dry out extremely quickly. This creates a huge disparity between how the two different parts of
the pot dry, and it's this that can really cause things like S-cracks to develop, especially if
this is compounded by parts of the pot having irregular cross sections, which those bowls
inherently do, as their feet have to be thicker than the walls above in order to support them.
All of that means that in this weather, those types of bowls are immediately wrapped up in
plastic, so there's no air circulating around them that could potentially dry them unevenly.
And I have to tell you, it's always one of the most irritating things that happens when you've
trimmed and made pots successfully, only for them to be ruined as you dry them out poorly. And
whilst I suppose all of that is true when working with clay at any stage, it's simply accelerated
in hot weather like this, and it's for this reason that I find myself being far more attentive.
British buildings aren't built to keep the heat out, thus in hot weather like this,
they just get hotter and hotter, and my workshop becomes stifling. It has a black pitched roof,
and it's incredibly difficult to cool down, which means it's also for this reason that I'm absolutely
not firing at the moment. The final issue I have to encounter is that practically the only way to
work comfortably in my workshop at the moment is if I set a fan to blow air directly on me as I'm
throwing or trimming. But of course, this just acts like a strong draft, and therefore dries
the clay out that I'm working on even faster. So, my question to you folks is, interestingly,
the way you work with clay really changes depending on the country you work in. Thus,
if you have any tips or tricks, or ways of working in cool weather or extremely hot weather,
I'd love to hear about them. And I know that must sound like the most mundane topic of all time,
but it is one thing that genuinely really changes the process of making pottery from place to place.
Beyond wrapping everything madly in plastic, I don't have many tips. I of course use hot water
when I'm throwing in the winter, and in extreme cases, I have put ice cubes in my throwing water
when working in the dead of summer. Beyond that, making thin pots like this in extreme heat can
be a real nuisance. But, I'm getting used to it, and it is becoming more manageable. Yet,
what I'd love to know are some of your tips. I live in quite a mild country, or at least it has
been historically, whereas of course, many other potters produce work in climates that are
extremely hot or are incredibly cold. And this can have a huge impact on how you work, your routines,
and the materials and the ways you fire themselves. So, if you have any specific tips or tricks,
or stories about working with clay in freezing weather, I'd love to hear them. And for me,
for the time being, I'll just keep struggling on. This weather-centric video is probably
the most British video I could have made, but if heat waves like this do become more common,
then I will genuinely have to change the way I make in time. That might be air conditioning,
that might be finding a studio where I can roll my wheel outside, and it definitely means finding
a workshop where the kiln room is separate from the space where I'm actually making work,
as even though my gas kiln is currently sitting full, ready to fire, I can't bring myself to fire
it in a workshop that's already sitting at about 32 degrees during the day. And it's sort of an
unusual position to be in, where you essentially have to halt your practice due to how warm it is.
That's all this week, and keeping it short and simple, is if I remember correctly,
I promised I'd be on holiday this week, but here we are. I hope you enjoyed the slightly
strange topic of this week's video. It makes for a welcome change, I have to admit.
Thanks for watching, and I'll see you next time.
