THIS IS HOW YOU REFLEX A BOW WITH HEAT!!!

Kramer Ammons
208 followers
I am turning an old bow into a fast shooting machine for my wife!
OUR NEW WALLETS FOR SALE: https://www.shatterproofarchery.com/shatterproofleather
OUR CUSTOM BOWSTRINGS FOR SALE: https://www.shatterproofarchery.com/bowstrings
OUR ARCHERY TABS FOR SALE: https://www.shatterproofarchery.com/shatterproofleather
I reflex the bow tips and get this bow shooting fantastic! This bow just needs a little more wood removed off of it in order to make it the perfect draw weight for Callie!
SUBSCRIBE!!! https://www.youtube.com/channel/UCOLE9sefMl1AaytbN_D6M7Q
.
.
.
.
#Reflexbow
#Recurvebow
#bendingabow
#Bowmaking
#Bowyer
I've got a bunch of unfinished bows down here. What I'm going to do is I'm going to pick one of these
to make into a bow for my wife. So a lot of these bows I messed up on or just set them aside for
whatever reason or I was helping somebody make a bow and they didn't want to finish it.
And so now I'm going to choose one of these to turn into my wife's new bow. Let's make a pick.
I think this bow would be the best one for my wife. This bow is actually the bow
that I shot a deer with earlier this year. It was my first year ever with one of my wooden bows.
If any of you guys would like to see that leave me a comment and I might post that. This bow is
really cool because I made it in me and my wife's very first apartment. I made it in the living room
there. It's got some cool, this is where the bark was and it was kind of rotted out but I was able
to kind of work around it. The bow is fairly snaky and there's a lot of set in this bow.
So there's a couple things to work around here but I think I can make a nice reflexed bow
out of this for my wife. So let's start getting right to it.
So
I wanted to interrupt real quick to remind you guys to dislike and unsubscribe.
So
we've made it to the point to where the bow is bending to the way I like it and now we're going
to start tailoring the bow. I'm going to try to get this bow to about a 30 pound draw weight at
probably 24 inches for my wife. The bow should be long enough though that I can get it back to a 28
inch draw length with a little higher poundage so that I can shoot it as well. So let's start
removing wood. Since we recurved the limbs we really got to remove a decent amount of wood
on the belly so let's get right to that right now.
Update the process. I've got this almost just braced height not quite there yet.
You can see the recurves on either one of these sides. It's actually looking really good I think.
It's kind of cool for how snaky this one is. I'm excited to continue on this process.
That's still really stiff so I have quite a bit more wood to remove here.
So let's continue on the tailoring process.
I think the biggest lesson I have learned from tailoring bows is that you can't go by sight you
got to go by feel and the bow can look perfectly tillered but then when you shoot it you may be
experiencing a lot of hand shock and that is not a good thing. So my process is when I get my draw
weight to within three to four inches of my draw length I start to shoot the bow and as I shoot the
bow I can feel if hand shock occurs. I can feel the vibrations and what limits coming from.
And that can direct me on where I need to take off more wood. I don't know if you can see that
right there but it kind of does a little C and so I am almost perfectly center shot with this bow.
Still a little too heavy of a draw weight but you always got to remember you're going to lose
or you're going to gain about two inches of draw length in the final sanding.
So that is completely okay where we're at but that's going to be it for today. Thank you for
watching another one of my videos. I'm going to show you part two. I'm going to finish this up
now. I'm going to have my wife shoot it and we're going to see how she likes it. I'm really liking
this so far. Hope you're liking these videos. Go create a wonderful day.
you
