Fall is in the air, and it's the perfect time to bring those cozy Fall vibes to your front door or inside your home.
In this tutorial, I'll show you how to make a beautiful fall wreath using the Flat Top Petal Method, creating a full, textured design that's bursting with rich unconventional colours.
Grab your supplies and let's celebrate everything we love about fall with this fun and easy wreath project!
Dave demonstrates how to create a \"Welcome Fall\" wreath using the flat top petal method. Inspired by a metal sign, the project utilizes burgundy and moss green deco mesh with gold polka-dotted ribbon to create a unique autumnal decoration.
Hello everyone! This is Dave from Dave's Recent Things. You all know, if you've been watching
me for a while, you know I love to experiment. I love to try different things. Sometimes it
works out, sometimes it does. Today's one of those days where it totally worked out
and I'm excited to show you what I'm going to be doing today. A little while ago I did a cross
wreath using the flat top petal method and today I decided we're going to make a fall wreath using
some different colors for fall, all inspired by a metal sign, Welcome Fall. So today we are using
10 inch deco mesh. We're going to do the flat top petal wreath method and something a little
bit different for fall. Why don't I just get started and I'll show you what I made. I'm using
my trusty friend here, the 14 inch wire wreath frame. I have 10 inch by 10 yard poly deco mesh
in a burgundy color and I also have 10 inch by 10 yard poly mesh in a moss green color. This gold
polka dotted two and a half inch wired ribbon. Here is the sign that inspired it all, this metal
beautiful sign. I'm going to be using cable ties today. If you don't have those, pipe cleaners will
work and I'm going to be using my regular crafting utensils. Here is our shopping list slash our
material list with all the items I'm going to be using today and where I purchased those items as
well. First thing I'm going to take my cutting mat and my rotary cutter. Now if you don't have those
a ruler and a pair of scissors works perfectly fine to cut your mesh. I am going to cut my mesh
and what's that magical number today? It's 10 inches. Today I'm cutting my deco mesh at the 10
inch mark. So I'm using 10 inch by 10 yard poly deco mesh. I have one roll of burgundy,
one roll of moss green. I'm cutting everything at 10 inches and I'm going to do 12 pieces
of each color. So 12 of the burgundy, 12 of the moss green. So that's approximately seven yards.
If you're going to use one roll, one color, you'll just need one roll of deco mesh to create
this project today. To cut my deco mesh I am going to do it a little bit quicker. I'm going to overlap
the two. Just lay the two right on top of each other and then use my rotary cutter cutting them
at that 10 inch mark. So I'm just going to continue on cutting until I have all of my 24 pieces in
total. That's 12 pieces each color. Here is our sign. Now for the metal signs the hot glue gun
doesn't really work so these are little cable tie mounts and you can stick pipe cleaners right
through the holes like I'm showing you right here and I'm going to attach these on the back side
using this. This is cement. It's like a crazy glue and I'm just going to put a couple of pieces on
the back. Now make sure when you're using it or picking out your crazy glue it says metal and
plastic. Now I put this on, add those two cable ties and I let it dry for 24 hours. So in the
meantime I'm going to move on to making my bundles. We have our 10 inch by 10 inch deco mesh here. I've
got the cut sides on the left and the right. We're just going to turn it into a diamond shape. I'm
going to use my cutting mat as a guide. If you don't want to you can just draw an imaginary line
right in the middle. I'm going to fold down that top corner or that top triangle piece.
Then I'm going to fold over the bottom triangle piece and what I'm aiming for is a total width
of our deco mesh once it's folded of five inches. Now you can do five and a half, five and a quarter
if you want. I'm just showing you right here. I'm going to do five inches. That works for me. I'm
going to place my hand right offset to the center. I'm going to take that left triangle, bring it over
to the right triangle and then I'm going to take my hand out nice and carefully making sure we
don't mess it up. Then we're going to just line it up again. I'm going to come in a couple of inches
from the edge, pinch right in the center, grab that top, pinch it together, grab the bottom,
pinch it together. Holding it with my left hand I'm going to grab that pipe cleaner. I'm sorry,
I'm going to grab that cable tie or pipe cleaner if you want and I'm just going to tie that off
just about two inches from that right hand point. So once I got it there I'm just going to pull it
nice and tight, grab my scissors, cut that excess off and I'm also just going to cut the excess of
that deco mesh off just to clean it up a little bit. And of course now I'm going to clean up my
mess and here is our flat top petal. The first one that we've all completed and now I'm going to
continue on making the rest. So again we're going to create that triangle shape, bring the top point
down, bring the bottom point down to five inches, fold it over, then we're going to come in just a
couple of inches, gather the middle, the tops and the bottoms and then we're just going to use that
cable tie, pull it nice and tight, cut the excess off of that and of the mesh and we've got all of
our bundles. So here is my wire frame, my bundles, my cable ties, we're ready to attach this to the
frame. So I'm going to be using the two inside wires to attach my bundles to. The first what I'm
going to do is using the second inside wire, so that's the second inside wire with a cable tie,
I'm going to click the cable tie a couple times leaving that opening or that loop. I'm not putting
it nice and tight and then I'm going to put my bundle in there. Now my cable tie that's attached
to the frame is going to go on the inside of the cable tie attached on the bundle. This is going to
secure it a little bit more and it's not going to move around on you or fall out. Once that's done,
pull it nice and tight, cut the excess off and we've got our first flat top petal bundle all
secured. For the second one, I'm going to use the second outside wire and we're going to do the same
procedure. So I'm just clicking that cable tie a couple of times, I'm leaving it open a little bit
with a little loop. For me, I'm going to grab my moss green, so my second color and I'm going to do
the exact same thing. So I'm taking that bundle, placing it right in that cable tie and then I'm
going to pull that other cable tie nice and tight, cutting the excess off and our second bundle is
all attached. So this is going to be my pattern that I'm going to repeat over and over and I'm
just going to go from the burgundy to the moss green to the burgundy to the moss green to the
burgundy to the moss. I think you get it right. Now for each section, I'm going to do four bundles,
so that's how we get the 24 pieces in total. And it just, for me, it worked perfectly. You can add
more if you want on there, it all depends. For me, this worked perfectly having the four bundles
and now what I'm going to do is I'm just going to continue on in my next section doing the exact
same thing, same method of procedure alternating between that burgundy and that beautiful moss
green color. Once it's all done, I'm just going to make sure it's spaced out and then whammo!
Here's the reveal of our base wreath. I'm just going to fluff it up and make sure it's how I
want it to go, but I am so happy with how this turned out. Like I said in the beginning, a little
different, but I'm loving it. Now for all my bow lovers and bow fluffing lovers out there, I apologize
there is no bow today, but don't worry, we are using ribbon and I am cutting this two and a half
inch wired ribbon into five inch lengths. So I'm cutting a total of 24 pieces and again those are
all going to be the five inch length, so that's approximately three and a half yards of ribbon.
Once I've got it all cut, folding it in half, cutting on an angle to create that beautiful
little finishing touch of the dovetail. So we have one side that's dovetailed, one side that's
straight, and you can do multiple ones at a time so it goes a little bit quicker.
I like to do two at a time just so it goes a little bit quicker. Now we have that all done
and what I'm going to do is I'm going to place those right on top of those bundles and I'm going
to use a little hot glue to do it. So all I'm doing is I'm lifting up the previous bundle,
adding a little hot glue on there, adding our two and a half inch wired ribbon right on the hot glue
and be careful when you do this, hot glue is hot. A little warning. So I'm going to do that for all
of that 24 ribbon and about halfway through I decided, you know what, I'm going to put the
hot glue on the ribbon first instead of on the mesh. This worked out a little bit better for me.
I'm not going to lie, I liked doing this rather than putting the hot glue on the mesh. So there's
a couple of options for you on how you want to attach it. Here my ribbon is all done. I am so
happy with how this turned out. I had this vision in my head, it turned out exactly how I wanted it
to. Now I had an idea of doing the bundles with the ribbons attached. So we're going to create our
bundle, place that ribbon right on top, then we gather it together, grab that cable tie on there
and then we pull it nice and tight. You can do this instead of gluing it down if you want.
I personally liked how flat mine was. This you can kind of see there's a crease in the middle of the
which is totally fine. To be honest, it looks great. I liked how my ribbon was a little bit
flatter on that deco mesh. So again, another option for you to do this if you don't want to
hot glue that ribbon on there. And then we just placed it on like we did previously.
My sign is all dry and you can see we have those cable mounts on there and again I used this contact
cement. It's for metal and plastic inclusive on there. So then we're just going to feed a couple
of pipe cleaners right through, twist it a couple of times and then we're going to attach that right
onto our wreath. So that's going to go right in the center. I feed those pipe cleaners right through
the back, twist it around a couple of times on both sides, flip it over, make sure it's centered
and then I'm going to twist it nice and tight, cut the excess off and then guess what? We are done
with our welcome fall wreath and I can't tell you how much fun I had making this wreath. I know I
say that all the time but truly this was so much fun to make. Like I said, the colors are a little
bit different. It was totally inspired by this welcome fall metal sign that I got from Unique
in the Creek and I just love how everything came together and how the end result is for this
burgundy moss green gold. Some colors that really you don't think hmm that's fall but you know what?
Loving it and I love how it turned out and I hope you like it as well. Thank you so much for joining
me today while I created this fall wreath. Don't forget to subscribe and hit that notification bell
so you could be notified whenever I upload a new project. Thank you so much for watching. Take care.
Bye for now.