Pocket Watch Cases and How to Open

Chrono Chronicles
8 followers
Jul 16, 2026
How to open 5 different types of pocket watch cases. Swing out open through the front, screw front and back, hinged snap back, button open back, and snap on.
You should only try to open a case that you would use a case opener on with a case opener. Yes you can use a pocket knife but a case opener is way better.
AI Generated·May contain errors
Video Summary
AI GeneratedThis guide explains how to identify and open various types of pocket watch cases. By observing seams, hinges, and specific markers like raised lips or buttons, collectors can determine whether a case is a swing-out, screw-open, snap-shut, or button-release type, ensuring the watch is accessed without damaging the threads or the case.
I'm just going to do a quick run through on the various kinds of pocket watch cases that
you're going to come across when you're collecting. One of the most common questions I get is,
how do I open this watch? I mean, I see it all the time. Do I unscrew the front? Do I
unscrew the back? How do I open this watch? And what I have here is a collection of about
five different types. They're different types because different ages, different styles,
everything. But the opening mechanisms on all these is sometimes a little similar,
sometimes different. I'm going to show you how to look at and decide which one you need to do.
I'm going to start off with this one. This case is a swing-out case, opens through the front.
There, you can't open this from the back. And when you look at a watch like this, you'll see
that the edge, there is only one seam. That's a key indication that this is not a watch you
can open from the back. So, we take it, and you have to unscrew it from the front.
To get to the movement, there's two possibilities here. One is that you do pull the stem,
and the other type you don't. I always suggest you try to pull the stem first.
You hear a click, you know you're good. There's a little nick down here at six.
Just get your nail in there, and it swings open. That's a typical swing-out case.
You find these in a lot of different varieties. 16 size, 18 size, 12 size. I mean,
it doesn't matter what the size is. A lot of times when you have a swing-out case like this,
with no seam except for on the front, it's going to be a swing-out case. Unscrew the front.
Now, I'm going to go to another one where you unscrew it. This is a typical kind of railroad
watch case. These are lever set. You will find watches that are pendant set. They'll look very
similar. One thing you'll notice is that there are no hinges. When you look at this case,
there are no hinges around the edge. You'll notice there are two seams.
You know that this opens front and back. One thing you look for is whether or not there's
a raised section here off to the side. If there is no raised section, there's a possibility this
is a screw-open case because they put a little lip there to let you know. One thing to know is
you really can't damage a case that's a pop-open by trying to unscrew it. It'll just keep spinning
and spinning and spinning. You try to pry open a case that's screw and back and screw front,
you can mess up the thread. You can damage the case. It's always better to try to unscrew the
case than to try to pop it off is the first thing, especially if you don't see any raised
section here. So this is relatively simple. You just unscrew the back and there you go.
Always be careful when you're screwing the case back back on. You do not want to cross-thread the
case. Once with enough practice, you'll get used to it. The front unscrews as well because this is
a lever-set watch, which means that you pull out the lever to set the time. That is something you'll
find on railroad watches. In this case, you don't need to pull a pendant or do anything else other
than just unscrew it and screw back. Now we're going to move to one of them where I was talking
about the lip. And this one I chose because it's very prominent. You see this here? That
sitting off to the side there tells you this is a pop-open. You know, this is a snap-shut case.
And sometimes you can get it with your nail. Sometimes you can't. A lot of times these will
have a secondary cover inside. Now, you don't see a little place with a raised section, but
these you'll typically see a section like you see there where there's actually a cutout, a cut-in.
You can use a pocket watch case opener or just a case opener, and it slides right there. And then
you just open it up. One of the things I've always found as a good idea is if it's really tight,
don't just go prying. Slide your case opener around the edge. Because of where it's hinged,
it'll get tighter and tighter, and that may actually cause it to pop open
without having to pry it. Also to remember, this case is a hunting case, so it opens from the
front. Always press down on the button before you close the lid. You do not want to wear out the
case. But one thing you'll notice is you can see there's the hinges. You know, they're obvious.
You know, you're not going to have a screw open case that has hinges. It just doesn't work that
way. There could be a combination of a hinged back and a screw front maybe, but you're more
interested in the fact that the back has a hinge, and that'll let you get into the watch by popping
it open. Now, something somebody will see that is used to European watches is this type. Now,
there's no raised section. There are hinges. But one thing to notice before you go prying it open
is look at the top. There's a button. There's a lot of European or English cases where there's
button. You just simply press the button, and it opens up. Again, inside you have an inner cover
that comes open like the other one did. Do not snap it shut. Press the button. And that's an
open face case with a button. So just because it's open face, don't assume that it just pries open.
Press the button, and it opens. But like I said, you'll find that more on English watches,
some Swiss watches, French. It's more of a European thing. Now, this one's a bit of an
oddity. Kind of. The company's an oddity, but the case is very simple and basic. You know,
this would be your dollar watch Ingersoll type idea of case. You know, there are no raised
sections. You can try unscrewing it, but like I said, it'll just go around and around and around,
and you really can't damage it. These are cheap. These are cheap cases simply made.
In this case, put a knife right behind the edge and pop it open. These will snap on and off
quite easily. Depending on the watch, depends on how it's set. This one's a
Manhattan, so you don't ever pull up the stem on a Manhattan. You pull up this little
stem off to the side, but it's pretty much one of the only companies that uses that. Otherwise,
you'll have a pendant set where you pull up and push down on the crown in order to set it. So
that's basically the five that I typically come across. Most often, you're going to come across
the screw front or screw back, or the hinged front, hinged back, or you're going to come across
the swing out case. You're going to come across a lot of the pop-ups, but they're going to be
lower quality watches a lot of the time, but by no means don't consider something just because
it's a lower quality meaning less collectible. And then, of course, depending on where you are,
the European style with the button on top. There are a few others that I didn't go over,
but this should give you an idea of what you're going to be facing.
