Fixing My 1983 Chevy Silverado C10 Pickup Truck Steering Column

My Brother Donnie
257 followers
592 Video Views·Jul 10, 2026
The steering column is falling apart!
All right y'all we're on this truck we got the old school jack stands out the rim and the tire
just flip it down set the tire on top of the other rim and tire you ain't got to worry about
crushing the back's a lot lighter so i put it on the plastic ramps transmission's out you can see
that it's puking they finally let it let it go let the transmission go that is um the hood
hood release the hell on this one
hood release you can see the hood didn't move so you come out here
and you who has a bonzi you got to bump it a few times and it'll come loose
i know all y'all been looking at this whole truck y'all like it we put a new motor in it it's on the
uh i put it in there a couple years ago the ac's been giving them a fit he's got a new compressor
on new lines on it new dryer on it uh new condenser on it all that stuff's new um switches are new
he's got a leak somewhere but i've got stuff to figure out where the leak is so i'm going to do
that while it's in here we're going to put a transmission in it we're looking for one now
the steering column itself is a little wiggly here see that steering column a little wiggly
so we're going to look at that and see what we can figure out there and uh then i'll get back to you
i think there's four bolts down here the way i remember these old columns now let me rephrase
i ain't really worked on no cars in the last 20 years 25 years but back when i remember
the uh you get down in there and there's four bolts there's four screws and screws that always
come loose so i believe that's what's wrong with this one this one's pretty well factory you can
see the clip on there still in there so i'm gonna start taking it down and see what i can find out
here i'm gonna unplug the battery first so it don't kill the battery on the thing and pull the
battery off of it so uh and then i'm gonna start working down in that column see what i can come
up with he's probably got them tight yeah you might i'll leave them loose i'll grab hold of
them with my hands and pull them off but let me go get some tools and i'll be back okay yeah
you get your nut loose okay
get your nut loose where you can get it about level with the end of it up here okay now what
you want to do they make a puller for this you can screw onto that and you can put in these three
holes what i've always done is get that thing leaned down where you can get your knees behind
it like this get your knees behind and pull and get this hand here pulling on it when you do that
take your hammer and tap right there now tap flat don't tap at an angle and hit just the nut
or nothing tap flat on there well you don't tear nothing up and that little jar movement will pop
that thing right off now you got to pull on it too and you're going to be pulling pretty hard
and you're kind of wedging it between your your knees or your legs and pulling with your arm and
then tap it and it'll pop and it'll pop out but i can't hold y'all and do all that so i'm gonna sit
you down i'm gonna get this hammer i got a hammer right there i'm gonna pull on it tap it a few
times and see if it'll pop off of there and i'll let you know tell y'all my tapping trick did not
work so now you got a little clip down there and that's a pain to get out but what you gotta do is
i'm gonna take this plastic off first um you gotta take your fingers push this down
once you push it down you get just barely enough room you need one of these picks
like so you reach in there and you grab a hold of it and you pick it out of there
you got to find the end of it which is right there you push down on you pick it out of there
get it out so we'll uh we'll start that now and see if i can get it out of there
and i'll let you know a little clip a little spring loaded there's a big spring behind this
and it looks like a uh it looks like a uh valve valve spring so you just gotta find the end
see if i can yeah i don't know if you guys can see it see the end right there
clip it's in half right there so you just gotta get it pushed down and grab a hold of it
get it pushed right there that's your horn button by the way
you go wire goes down in there and hits that beep beep beep okay y'all after a little bit
of picking i put this nut back on there for a safety measure but after a little bit of picking
it jumps up so here's the picks i used there you go popped all the way out there
i'll do this one-handed and look to make sure i'm getting it filmed and try to move it on
there's the ring
the ring we'll put it up there in that and this is gonna come out there's that
okay put that over there and this is your horn horn ring
okay then you got all this here okay this ain't no problem this is your turn signal
it all comes out pretty easy you get you a phillips screwdriver wherever my phillips
screwdriver is there it is get your phillips screwdriver and you take this one here out okay
my phillips screwdriver might not be worth a hoot here see if i got anything on the other side nope
okay i gotta go get a good phillips screwdriver this one is just way too big at the end
and you know i ain't got enough tools so i'm gonna go get some more
so one problem he was having is his ignition switch it would not unlock
and uh let me show you here
you've got to play with it keep key just in the right spot get the unlock
because this one is not working and basically there's a there's a screw this screw here
that's along with the rhythm it goes in right through there and holds it holds it in place
that's one thing that damn screw right there and that screw right there is extremely loose
but it's farther down than that where it's wiggling it's wiggling down here
so i gotta get the uh the lines for that loose i'm gonna slide this up this has got to uh come
out too so i've got to figure out some other how to get them wires loose maybe if i tilt it down
might give me extra something just fell out what is that that's a screw on the time signal that's
nothing all right well let me keep working here and see what i can come up with here's the big
spring where he was fighting okay and uh then there's a bunch of hair right here for some reason
a lot of hairs in there but uh
the shaft don't have no play in it's something else
we gotta keep digging um right there's the bearings bearings are fine also
there's something else down in there we got to keep going but all these screws here are loose
they're loose that one over there was loose i tightened it up a minute ago just see if i can
this one here i haven't been able to get on to that one ain't that bad but we'll keep going
okay y'all i got down this far got all this out i got stuff flying everywhere but
anyway the uh if you look right there see that bolt up in there that bolt is loose as a goose
but ronnie said that ball gets loose see that ball right there it is moving around also
and it looks like probably damn if them bearings ain't gone too
that plate ain't down all the way on them bearings there
right there so it could be
all the above but you see that ball moving down there i think this slid out that's why that's
moving around so much i can't get a hold of it let me see if i can get screwdriver behind it and
pick it out of there that's a that's a little ring of some sort i think that's uh some kind
bushing ring set it up here and then obviously you got your ball bearings there but all the
ball bearings are still there they're still in there but there's a lot of slop there
but it could be because that rings out now it wasn't all the way in here but there's definitely
it was moving down in there okay you see it move well i had to unbolt it down here so you're
some movement down here but the movement was right in here before that i seen and that is that
bolt down there is loose but i'm sure there's three or four of them bolts and i can only see
one but i'm not exactly sure how to get this piece off so i'll have to do some research and come back
okay y'all i figured out if you push this thing in and you turn up there's a spring in there
and you can get in there and there's another screw down in there
um okay so i'm locked onto it there we're gonna see how loose it is
oh that's nice i can't lock onto it good enough there it is there ain't no movement no more
just by tightening them two up and i bet you there's two more up above it
that need to be tightened yeah see there's no movement in it now at all so i'll have to figure
out how to get to them other two and uh was i even on it there's no movement in that shaft now
at all so there's no movement in that shaft now up now my battery's wanting to die um but there's
no movement so that fixed it but i'm sure there's two more bolts up here i need to get to and uh
i gotta figure out how to get this column off there's two there's two uh embossments here
takes eight millimeter screws i think i can screw into them and pull them out with a claw hammer
but i'm not sure um i'll try it y'all ain't gonna believe it but that actually worked
can you believe that screw in it okay claw hammer to it knock the hell out of another claw hammer
and it pulls them out and they say to put them back in you just uh get it lined up knock hell
out of it so like right there well hell i don't put it back in but the top's still holding it i
don't know why so i'm looking for what i missed there must be something up here holding it i
think that roll pin might be doing it up there and there's a roll pin right there um what it
looks like is what it feels like anyway feels like it's hitting up there but i'm not sure
um you can see one of the screws there i might be able to get a uh it might be this
might be that all this holding up all this here
i'm definitely sure how that goes on
um
that's your tilt that's where your tilt screws in but that roll pin up there probably got it
let me uh let's see if i can see up in there and see them other two bolts and maybe i can tighten
without taking it all the way out okay y'all i got down to where i needed to be
there's still a little play in it um wrench off here problem is all these bolts are just
hand tight um so that's what's going on to get that top bracket off this whole piece here
that i was messing with to get it off you have to put nobody's telling this you have to put that
tilt column handle back in there and you that tilt column grabs a hold of that and locks in
grabs a hold right there and locks in so you can swivel it up and down but it won't come loose
if you take that tilt column and pull pull it the fingers come back and unlock and it pops forward
so i've got some uh some blue loctite and also got some red loctite i'm probably gonna red
loctite them so they don't come back loose and uh we're gonna start putting it back together
that bottom bearing fell apart on me um i'm going to see if i can find all the bearings
if i can i'm gonna put it back together there's nothing wrong with it um it's fine it just needs
grease in it to hold the bearings in but i kept jerking it up and down up and down up and down
trying to figure out how to get it loose and that threw the uh that threw the bearings out of it so
if i can find the bearings i'll put them back in i'll put it back together and put it back in there
if not i'm going to use my other one for the bottom start putting it back and get it all
back together to the top and i'll have to wait to the top to get the uh to get a new bearing
but i'm gonna try to start reassembling it and see what we can do here
okay y'all you need to eat your wheaties when you gotta put that one in
push it in there with a regular phillips screwdriver or whatever
and turn it 90 degrees you got the line there's a couple dimples there you gotta line up to get
in there and you get it in there and you turn it and it locks in place you've got to eat your
and then this piece just slides on there you got to kind of tricky you gotta line that pin up right
here get it all in there um i beat these things back in on both sides i put my key shaft back in
it here and here i put that wheel in there made sure that wheel was doing what it's supposed to
do it's kind of a pain in the butt to get that timed but you just got to work with it you'll
get it you got to make sure that's set right basically that big hump goes in that end so you
got to make sure that that's set up right i put a little grease on all of it as i was putting back
together um i put a little grease on that shaft going through there got it all lined up um now
we're gonna slide this piece on that's on there then you uh now i've done did this about five
times because i keep forgetting stuff then this goes on there okay so that screws on locks in
or not locks in it goes on now okay that's done now these three screws here
these little ones that's uh star drives one goes there one goes up here and one goes over here
okay they're star drives one star drive they're this thing it'll put them in there
so you get them you get them in there hopefully that fan ain't messing with you too bad but it's
100 degrees in this truck and i've got to have some kind of air movement so i got that in how
so after you get these three tightened down okay there's a then your ignition switch
that little groove on your ignition switch it's got to go towards the bottom
it's going to fall somewhere there we go so then uh this bigger screw with the
long shank on it goes in there like so look at it just right it ain't going to work with
my fingers here anyway that that goes in there like that you need to feel screwdriver
that screws in there like so that's what holds your ignition switch in so now you can take the
key out and nothing will happen and take the key out the cylinder won't fall out on you all that's
good keys hanging in it i gotta tighten the rest of these up i got that one that one and this one
and then i've got to uh start putting the switches uh and all that in there all the
turn signal stuff might not be able to do that yet i'm still waiting on that bearing i got 90
percent of it there i got to find two more balls i think they're laying there in the floor somewhere
i've got to look for them see if i can find them if i can find them i'm gonna use that one if i
can't i'm gonna buy a new one and then all this stuff up here has got to go back on there
and then we'll be done okay y'all i can't really eat you back far enough but i got this
i got this steering wheel back together or the steering column back together
had to get a set of bearings for um there's part number with the bearings comes with the rack
and comes with the uh on and off and comes with the spring this
the most challenging part of this whole thing was this little piece here
this thing has got to get timed perfectly so basically this when you turn that key
that's got to hit perfect there and then run up in here and then come back and lock in here
well you gotta time this with this with this and this is time down here and all that is down in
this bottom of the column down here this hooks to the key switch basically and around the back
and forth there's a rod that goes from here over to the key switch which is a bear that took me
probably 45 minutes to get that all set up right because this has got to go down in a hole
and this moves independently and this moves independently and there's a spring
there's this spring that's in your way the whole time
the spring's got to lock in the back side of this gear
the spring it bolts in here that piece there locks into that little groove there on the back of it
this gear is pointed out this way this is set in that way so you're trying to drop this gear in
blind to line up in there and there's a piece of metal up here see that's the that's the pain
to try to get that lined up these bearings ain't nothing basically all i needed was one ball bearing
um and i was going to uh i was going to tear the whole column back out to put this in there
so i stole one ball bearing out of that one and put it in there so then you put this in
this tightens everything up that goes in like so that tightens everything that's the inner
that's the inner race to it so you got the outer race is here the inner race is here
that tightens everything up keeps it from moving now when you get there the steering wheel don't
move now okay they don't move either way i'm beating on it here steering wheel don't move
either way and the tilt still works tilt down put a tilt down nothing moves on it
it'll tilt up by itself oh well when you pull the handle all the stuff is put back in there
everything seemed to work perfectly so we got that part of it done it wasn't around the world
when you tried to drive it that was moving everywhere the reason it was doing that is
because you had to beat on the thing i'm putting everything back in the bag here so i don't lose
you had to beat on it when you tried to turn the ignition because the ignition switches wore out
so now you uh the steering lock still works you can do that without no problem
it'll lock out it'll unlock nothing wrong with it here is the old ignition switch it's locked up
it won't turn you got to wiggle the key and play with it get it in a certain spot and it'll finally
go and uh ronnie was pulling around on the steering wheel constantly and trying to move
everything around get everything lined up perfectly to go in there you go now it'll turn
but if you push that key all the way in it won't turn you pull it out a little bit you
got to play with it get it right in a sweet spot to get it it's not turning it's locked up
still locked up but anyway you can get it to go but the end of the key was wore out is what the
you see the end of that key is just in that key is just for slap out
keys wore out it won't turn the tumbler
i could have probably had a locksmith make a new key but i just bought a new switch and put in there
or i might be able to make a new key believe it or not i've got a key machine
um if i cut a crisp key it might help it but that end is just there's nothing left there
um so i'm sure that's what's going on with it he's just wore out we didn't have a spare key
so we had to change the ignition but the ignition's changed the bearings have changed
the them four bolts down there is tightened up and i got red loctite on
where they won't come loose again everything's back together everything's tight everything feels
good um i got all the electronics or not electronics but all the wiring put back in it
down here i had to plug them all back in they're good um everything seems to be fine we'll try it
when we get the transmission back in it but y'all if you like what you see give us a thumbs up
i'm going to subscribe the channel if you hadn't already and we'll catch you on the next
