HP LaserJet Mfp M234dw Printer Series : How To Reset To Factory Defaults
16 Video Views·Jul 6, 2026
AI GeneratedMay contain errors
We will show you how to perform a factory reset.
for HP LaserJet MFP M234 printer
To do so, the printer must be connected to a network.
And you know the printer's IP address.
If you need the printer's IP address,
Press the information button or the sun button
on the control panel
And he will explain a information page.
If the printer is in sleep mode,
You can press the cover button to turn it on.
Then, press the sun button once.
The information page will be activated.
After that, you will be able to obtain the IP address from the site.
After the IP address is identified,
Launch your browser.
From your browser, click on the IP address.
This will take you to the EWS page or the closed service website.
for the printer
Go to System.
Continue with your printer settings.
Select OK.
If you receive this prompter and your relationship is not personal,
Go to Advanced
and select Proceed to, IP address.
For username,
I am the ADMIN
in small words.
The IP address,
You can find it on your information page that has been written.
The actual IP address is
PRINTERPINT.
Enter.
Under the System,
Go to Service.
Click below
so you see Restore Defaults,
which will reset all settings back to factory defaults.
Select Restore Defaults.
There is a warning that asks,
Are you sure you want to reset the device settings to factory defaults?
Select OK.
You will notice that the printer will restart.
You have just reset the printer to factory defaults.
That's how you do it
Initializing factory defaults
for HP LaserJet MFP M234DW printer