Phoenix Model AERMACCHI MB-339 Composite 2.7m Turbine RC Jet - Flight Talk at Winnamac Jets 2026
1 Video View·Jul 1, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video features a flight demonstration and review of the new Fenix MB339 Composite jet at the Jets Over the Heartland event. Pilot David Payne and the presenter discuss the aircraft's impressive stability, high-quality composite construction, and the seamless integration of the Synapse gyro system for a scale-like flying experience.
We're here with David Payne. We're flying the all-new Phoenix MB339 Composite.
We're here at Jets Over the Heartland in Winnemac, Indiana.
We've got a full flight line, so I'm doing some spotting while filming.
So we won't be doing any zooming in, but hopefully this will be a good shot for you guys to see the full flight.
So David, we just built this airplane before the event, and Phoenix was nice enough to get us a sample of this.
We will be getting these in stock pretty soon.
It's currently the end of June, and they should be here hopefully in the next month or so.
You can currently pre-order it on the website.
But let's talk a little bit about the flight performance, David, as you're flying around here.
Yeah, it flies extremely well. You know, the more we fly it, the more I like it.
It's very stable in the air. It feels very much like a big jet.
We've been kind of working and tuning the rates and control throws and the synapse in,
so we get a really nice, clean, you know, driven feel, right?
It's extremely solid on the sticks.
So we're running the 20-channel Spectrum PowerSafe, of course, with synapse.
And David being the jujitsu behind the synapse, although it's not difficult to set up.
Very quick, very fast to set up, yeah.
Yeah, we started with kind of the base setup, and then you've kind of been tweaking on rates
and, of course, some of the stop-lock and release rates.
But how much work have you had to do to the gyro side of it?
I think this is kind of a perfect example, right?
I think a lot of people, you know, a lot of the times, right, you just fly and fly and fly.
But this is a great example of how well the synapse, you can take it to that fine degree, right,
where you can just really, really fit each aircraft exactly how you want it to fly, right?
If it's something fast and you want it to be really crisp and really agile, or something like this.
It's very scale, and you just want it to be predictable and locked in and rock-solid the whole time.
Yeah.
And you've done some more adjustment to adding additional gains and flaps?
Yeah, so this one's got, you know, it's got a few different things, right?
We've kind of tuned the priorities.
We've tuned the stop-locks a little bit individually for all three axes.
But then also, which is a really, in my opinion, a really cool feature, is our gains are tied to our flap channel.
So at normal rate, or sorry, no flaps at all, right, that's our high-speed gain,
which I think on this aircraft is really right at the middle.
It's at zero or, you know, 50% of its rate.
And then for our takeoff flaps, I boosted it all the way up to 70.
And then for landing flaps, it's all the way at 100.
So it's positive 100 on the monitor as far as that goes with value.
So it's getting all of the gain when you're at slower speeds with full flaps.
And it really just, you know, yesterday we had a lot of crawls around, right,
and it really showed how well and how locked in it becomes.
And it takes a lot of your workload and effort off of you because it's just so solid.
I don't know if you guys saw that.
While David was talking there, he was just doing the pattern with one hand, just flying with his right thumb.
That's just how locked in this airplane is.
And, you know, during the build process, we were really impressed with the airframe.
I think both of us were excited to get it and excited to work on it, and we jammed on it.
We took, what, I don't know, a full month worth of lunches.
Yeah, a lot of 30 minutes at a time.
Yeah.
But, you know, it went together well, right?
I mean, the gear doors fit well, the paint matched, you know, the alignment of the paint, all of those things.
It's very glossy, very shiny paint.
We've gotten a lot of comments on just how good it looks and how well it presents.
You know, it just looks really clean and really good, whether it's on the ground or in the air.
Yeah.
Yeah, and you guys are obviously seeing the additional wing tanks we have on the airframe.
Those are optional.
It comes with winglets just to cap it off like a stock setup, like they fly it at full scale.
But it does come with the tanks underneath the wing.
And we flew it both with the tanks and without the tanks.
Yeah, our test flight was without the wing tanks.
And it didn't really change the CG much.
It didn't really change the overall feel of it.
The trim was like, I think, two points more on the elevator trim, and that was it, right?
It just wasn't much.
So this is running the KingTech 160 on board.
I'm sure the range could be a little—you could put a little larger motor in it, but I don't know, David.
The power seems really nice for me.
Honestly, I mean, you know, we'll go full power here and just do a big, huge loop.
The airplane's got plenty, honestly, plenty of power.
Oh, yeah.
Yeah, that's more than you'd ever want in an MD.
And it's fuel-efficient, too.
I mean, we're getting seven-minute flights.
Seven minutes with plenty to land with.
Plenty to land with.
Let's slow it down here for a second.
Yeah, let's get some slow shots.
So there you go.
So as we put the flaps in, we're getting more gain.
So the airplane just becomes super rock solid.
Any kind of gust or anything like that.
Takes a lot of the workload off a pilot if it's a gusty or, you know, crosswind day.
It just helps them.
Doesn't fly it for you, but it certainly helps.
So this airplane comes with the retracts, of course, the lights, the light controller, the gear controller, the tailpipe, and even a full cockpit, including pilots, which is pretty—
Pilots are really pretty good-looking.
They've got nice little, you know, visors on their helmets.
They're appropriately sized, and they really look the part.
The cockpit's impressive.
Yeah, they did a great job with that.
And it's nice to see an airplane come out of the box where you don't have to drop another, you know, $300-plus in pilots just to have it look good.
And the canopy folds to the side.
I don't know if you mentioned that or not.
No, yeah.
Yeah, the canopy folds to the side, more similar to scale.
You know, it's got two little magnetic pins to hold the canopy on, so pretty quick to turn on and off.
You've still got your hatch in the back over the turbine, so you get to that access point really easy.
And the overall, like, interior space is really nice.
The airplane is—it has that painted speckle look to it.
Yeah.
So it's not just raw finish inside.
So they really took care to finish it out.
Yeah.
And, you know, King Tech dropped right in.
It comes with a tank as well, which is really cool.
So it's a—I think it's the same tank that's basically in our hop, so it's a 5.5-liter tank.
So plenty of fuel on board.
Like I said, we're getting many, many minutes of flight, seven minutes with room to go.
And, yeah, just the gear doors, everything just went together smoothly.
It took us a while, but we were working on it lunch—one lunch at a time and having some of the guys bringing Chick-fil-A here and there to get it done.
We had some help.
Yeah, we had some—
A lot of lunch deliveries.
Yeah, a lot of deliveries.
But we did get to maiden it about a day before Winnemeck and put a couple of flights on it each
and then felt comfortable enough with it to bring it out here in front of people.
And it's been just rock solid.
Another pass down the runway for you guys.
All right, so our timer just went off at seven minutes, so this pass will be—we're going to land, guys!
We'll do a gear pass here, so half flaps.
And it seems like it slows down real quick with flaps, although, you know, it's been—
Yeah.
It's composite, so it's slippery, right?
It's got a little drag on there, but it overall slows down to a comfortable rate in landing.
Gear comes down nice and smooth.
We are running our sequencer on the gear doors and not the sequencer in the gear box, so that's just something we just preferred to do.
But you can run it that way, right, Davey?
Yeah, you can use the box sequencer if you wanted to.
You know, it's just, as you said, right?
It's just something that—it gives you a lot more adjustability with the transmitter sequencer, so I just tend to run those.
Yeah.
Absolutely would work off the box if you wanted to.
And you've got nose wheel gyro turned on.
Nose wheel gyro's turned on, too.
Which is another nice thing with the synapse. Beautiful landing there.
Very friendly, I mean, you know, just will sit there and carry the nose.
It's a really nice flying airplane.
Yeah.
Lands very slow, as you saw, you know.
Yeah.
Had a little bit of headwind, but not much.
It's just—it's very predictable.
Yeah.
Presents extremely well in the air, in my opinion.
Yeah.
Oh, for sure.
Very cool skiing.
Yeah, absolutely.
We don't yet have smoke on it, but that's definitely soon to come.
Not yet, but it's gotta come, right?
We'll get that done before the summer's over.
But yeah, there you go, guys.
There's the new Fenix MB339, full composite, 2.7 meter, right at about $4,000 for the airframe kit.
Again, that's gonna come with gear, it's gonna come with the pilots, the cockpit.
I'll show you quickly the cockpit here.
Look how shiny it is.
Yeah.
Right?
It's so nice.
It turns, you know.
Yeah, it turns a lot of heads.
Yeah.
Yeah, lights are included, everything, guys.
So check it out.
It's on the Horizon Hobby website.
Just type in Fenix Composite, and yeah, he's gonna open up the canopy here.
Show you guys how it flips open nice.
And look at those pilots.
I mean, that is a really good out-of-the-box pilot.
We've still got a quarter of a tank of fuel.
There you go.
There's your fuel level.
So really good fuel.
That's not even close to UAT.
But anyway, well, thanks, David.
Awesome flying.
Yeah, thank you.
I love it.
Yeah.
All right.
We'll see you guys later.
Thanks so much.

