Tintoretto Master Study Part 1

Tintoretto
1 follower
2 Video Views·Jun 29, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThe artist demonstrates a master study of a Tintoretto drawing (based on a lost Michelangelo sculpture) as preparation for a sculpture project. The process emphasizes a structured approach to figure drawing, moving from rough comparative measurements and internal structural blocking to refined contours and accuracy.
Hello everyone and welcome back into the studio. Today we're going to make a drawing,
a master study of Tintoretto's drawing of a lost Michelangelo sculpture,
as a preparation for a large sculpture project that I am undertaking. If you want to see more,
watch longer videos, and get feedback from me on your own work, check out my Patreon page,
linked in the video description. Quick rundown of the materials first.
It's pretty basic stuff for the most part, with the exception of the paper perhaps.
I'll be using a Mitsubishi Hi-Uni graphite pencil. These are Japanese pencils,
so if you're interested in the lead hardness that I'm using, but you're using a pencil from
a western company, keep in mind that the Japanese pencils are softer, usually by something like 2
grades. So a 4H for me here is around a 2H in a common brand like Staedtler or Faber-Castell.
To erase, I'm primarily using a kneaded eraser. The paper is Stonehenge from Legion,
that's been hand-toned using Black India ink. You can just as easily work on a paper that's
colored by the factory though, I do prefer the look and feel of a hand-toned paper.
The reason the paper is toned dark is so that we can use white chalk to bring out the highlights
later, as you'll see. Because the camera is filming from the side a little bit, obviously I
can't have the camera in front of me when I'm drawing, it's off to the side, the drawing ends
up slightly distorted, and that distortion is going to change a touch as this drawing takes
place over a couple of days, and so the camera changes position slightly. I've tried to correct
for this with my editing software, but it's not perfect, so if the proportions of the drawing
changes a little bit and looks a little eschewed from time to time as we go along here, it's because
the camera is off to the left and moved a little bit. Let's get into drawing talk then. My talking
isn't always going to line up perfectly with what's happening on screen, because things need
thorough explanations, and in the beginning in particular, the drawing moves
faster than I can talk. First, I locate the top and bottom of the drawing, and these are arbitrary,
meaning it doesn't really matter. Of course, I want to maximize the space I have on my paper,
so I make the top and bottom close to the edges of the paper, but not all the way to the edge of
the paper for compositional reasons, and also in case I need to expand the drawing a little bit
for whatever reason. Since I'm using comparative measurement here, I don't need reference that's
the same size as the drawing I'm making. In order to be able to reference drawing to reference,
I locate the midpoint between the top and the bottom of the drawing, and then I do the same
thing on the reference. Now I know that this point needs to be in the middle of my drawing,
as it is in the middle of the reference, and I can tell what is in the middle of the reference,
and thus what needs to be in the middle of my drawing. This anchors the drawing to something,
and keeps me from having to guess as I move from top to bottom. In the beginning here,
we're going to be working up a simple version using straight lines mostly, just to locate where
everything needs to go before putting too much effort into what it looks like. I do like to
locate roughly where the extremes of my drawing are in relationship to each other before beginning
to draw in earnest. For example, where is the raised hand on the left hand side in relationship
to the lowest point of the drawing, and where are they both compared to the midpoint, and all the
other points. This can help make sure that the drawing doesn't get placed too far to the left
or right on the paper, which could potentially make for an awkward composition on the paper,
where the figure is squeezed into the corner by accident, or worst case scenario, one arm
not fitting properly and going off the side of the paper. We also want to compare overall width
to overall height at this point, and get a rough estimate of what that relationship is going to be.
Since we've determined the height, we can use the height that we have here to compare the width
against. Of course, we can't guarantee that the heights are right at the moment, it might turn out
that they need to change somewhat. Keep this in mind and don't let one measurement never be taken
again because you think you've solved that riddle already. Continue to measure throughout the process.
The widest point will also be placed in relation to the midpoint and to the other points dotted
around the paper. This is, of course, really rough and not really meant to ensure success, just to
give us a decent place to start drawing. Expect big changes in the centimeter range when starting
out a drawing like this. I'm not going to obsess over measuring these points because perfection can
never be reached here, no matter how much you measure. I get them down to the best of my
abilities and finesse them around for a few minutes, but I'll quickly move on to the actual
drawing. Accuracy is built in the drawing itself, by drawing, not by measuring points before there
is anything recognizable on the paper. When starting the figure proper, I do prefer to start
from the inside out and in somewhat the same way that we start a sculpture. By working from the
inside out, you set parameters internally inside the figure, and these parameters set things like
height, gesture, and structure of the drawing or the figures that you're drawing. To this setup,
you can add contours, which are much more detailed and complex to draw, and sort of
hang the contours or outlines onto a decently working internal setup. Decently working being
key, of course, because we have to work with the mindset that things are going to change on us,
and the fact is that that's okay. I like to locate the tilt of the pelvis and the two
axis points at the pelvis before extending out from that the center line representing the spine.
This doesn't always work in drawing, of course, because you don't always see the front or the
back of the pelvis. Here we have a somewhat of a three-quarter view of the main figure's pelvis,
so we can see a little bit more on the left side than we can on the right. This you can represent
early on with some simple lines describing the pelvis, and thus have the pelvis turn a bit in
3D space without much effort. From this pelvis, a center line is projected upwards throughout the
torso until we get to the pit of the neck, or the PON for short from now on. Since we've established
a midpoint and a top, we can work with those and compare how the width of the pelvis fits
into the distance from the midpoint to the top of the drawing, essentially using comparative
measurement. Once we place the PON, we can see how much space we have above that, and compare
PON to the top of the drawing, to the top of the drawing, and the midpoint. With some points
of truth roughly established, we can compare new things and add to those, and thus place things
more accurately and less randomly, which of course means we have to move things around a
little bit. A big thing to look out for is going to be bony landmarks, essentially easy to come
back to points in the drawing that are bones, that will help you set the gesture of the figure.
For example, how far to the left is the PON compared to the midpoint, and where is it above
the pelvic points? Where is the left knee compared to the PON? The vertical alignment of bony
landmarks matter a lot because this is the main thing that sets the gesture of the figure in the
beginning here. Aligning them correctly is going to give you a chance to get a well-gestured figure.
With PON located, you can travel out from it to the distal end of the clavicle, which is this
little bony bump on top of the shoulder, usually located right where the deltoid muscle meets the
trapezius muscle of the neck. There is an angle from the PON to the distal end of the clavicle,
and the distal end of the clavicle has a relationship to what's below it that we've
already established. By combining these two, we can find a starting point for the right width
for the shoulders. The fact that we can see more of one clavicle compared to the other
tells us that the torso is turning, and this should certainly be represented well in the
blocking. This method is then repeated over and over again to locate things in our drawing.
We often call this technique of locating bony landmarks triangulation. We know two points,
thus we can find the third point, as it has a relationship to the previous two.
With the basic construction in place more or less, we can build out the contours and,
in some ways, attach them to the internal structures that we've established.
We can notice that an angle break in the contour corresponds with something happening internally,
and place that angle break in the contour according to what it's meant to relate to
as far as structure goes. This gives the contour a slightly better chance of being decent,
a decent guess, let's say, in the beginning. Contours just means the outline of the body,
of course. I'm simplifying a lot when laying in these contours here, using straight lines and
cutting through a lot of information. I do this because in the beginning, it's not about
making perfect contours, but about getting the big picture established. Not only established,
but established in such a way that it's going to be easy to move things around.
These straight lines used in the beginning are lightly drawn and they're broader and
then the eventual lines will need to be, or wider than I'd like them to be. Light makes sense
because using a light touch here lets us erase more easily, and we know we're going to need a
lot of erasing. Broad just means the lines aren't sharp, they're softer, wider, and a little bit
fussy. And this quality is desirable here because it means the lines are a little bit more ambiguous
than if we made them too crisp and clean. Notice how I hold my pencil here and how it changes
depending on what I'm trying to do. Most of the time I'm holding further back on the pencil,
as this is less straining on the hand and I find it helps me draw a little bit more freely and a
little bit more lightly. When doing more detailed work, I will hold further up on the pencil,
or when I need to apply more pressure, I'll hold further up on the pencil, which affords
a bit more control, not in terms of pressure, but in terms of the line that is applied.
We're roughly blocked in at this point. Now comes a very important phase of the drawing.
I've edited a lot here, edited the video a lot here, because there simply isn't
that much happening, at least not in one single swoop. But the changes made during this phase
is very vital. We're going to edit the block in and slowly move it towards being more accurate
and delicate to the reference. This does mean usually adding more and more complex information,
or more lines if you will, than what we have here, but not so much and not so quickly.
The next steps are going to make our drawing less flexible than it currently is,
and since accuracy to the source material is vital to me here, I'm hovering in this stage
of the drawing for a little while and making sure the block in is as accurate as I can make it.
Thank you for watching. If you want to see more, check out my Patreon page,
linked in the video description. I hope you learned a thing or two in this video that you
can take with you into your own practice. Please let me know what you thought about
the video in the comments below, and until next time, stay creative!
