The Exact Way I Design a Food Forest for Constant Harvests

FFG - Food Forest Garden
176 followers
29 Video Views·Jun 25, 2026
Free to join, and waitlist members get early access when we launch in July.
0:00 — Introduction
1:33 — The Workshop
2:00 — The Land
3:02 — Building the Base Map
3:30 — Keeping It Simple
4:12 — Mapping Sunlight
6:23 — Mapping Wind
7:23 — Mapping Water
8:41 — What Else to Consider
9:24 — Placing the Guild
12:47 — The Workshop
13:06 — Zooming In
13:39 — Choosing the Main Tree
16:48 — The Shrub Layer
19:28 — The Support Species
21:30 — The Lower Layers
24:41 — Annuals
25:46 — The Final Design
AI Generated·May contain errors
For the last 10 years I've planted three food forests in three completely different climates
and grown about 50 to 90 percent of our fruits and vegetables along the way whilst working full-time
and raising our two daughters. And the key to the success has been getting the design right
at the start. A well-designed food forest sets you up for more food with way less effort over time
by using mostly perennial plants that grow more productive each season instead of needing to be
replanted. And without the design even someone who genuinely loves this stuff can end up with
trees that are struggling, years of nothing much to show for it and a garden full of plants that
aren't really doing anything for each other. So whether you are starting from a bare land or
you've already got something in the ground that might not be working the way that you want to,
this is your step-by-step guide to designing what I call a one guild food forest. It's a system that
is easy to manage and actually feeds you season after season. I will share a framework I started
building in France back in 2015, then refined in Portugal and now here in the Azores. And this
approach works whether you are on a small urban lot or a larger homestead. Using this 700 square
meter section of our land as an example you will learn where to place your first food forest guild,
how to choose the right plants for it, how to space everything correctly and then once you've
done it here you can use the same process again and again until one guild turns into a whole
food forest. And by the way if you're not totally sure how to do this on your own land in your own
climate without it turning into a never-ending chore or another half-finished project, I'm
building an online workshop that walks you through this entire process from start to finish. We are
launching in July and if you want to join the waitlist now you will get early access. The link
is down in the description below and it's free to sign up. Now let's get into it. So this is a small
section of our land here in the Azores about 700 square meters and if we design this correctly we
can comfortably grow several hundred kilos of different kinds of fruits, berries, herbs and even
staples. Right now though we're going to use it to figure out where our next food forest guild goes
and as you can see it is not an empty land. There's already a guild planted in the corner,
the northwest and east sides are all planted with large shrubs and trees, there's an old stone
well house on this corner and a spring-fed creek that emerges right here and runs
straight through into the lower part of the property. We've got a very steep incline rising
up to the east and just as deep to the west with the land sitting right at the bottom of the valley
and the southern side is quite open with a view of the mountains. So unlike a flat empty backyard
this piece of land has some limitations but also a couple of advantages which makes it a great
example. To make this whole process easier I like to start by creating a simple base map. This is a
bird's eye sketch of the land roughly to scale. You can build your own from your own measurements
or just sketch over a satellite image from Google Maps or Google Earth, either works. I've drawn
mine from measurements I took on the land myself with everything that is already here marked on it.
The well house, the creek, the existing trees, the food forest guild we planted a couple of months
ago which is drawn to its future mature size and the main ways in and out of this area. And with
that down on paper I can start figuring out where the next guild goes. Now if you spend any time in
the permaculture rabbit hole you've probably come across a site analysis. This is where you look at
climate data, soil tests, wind direction, sun path modeling, the whole thing and it's generally useful.
The problem is it can turn into a project of its own. Weeks of research, pages of notes and the land
sitting there waiting for you to get started. So what I'm going to do instead is a lot simpler.
We're going to look at a small number of things that change where this food forest guild goes
and the first one is sunlight. Sunlight is probably the single most important factor before deciding
where a guild goes. Get it wrong and you end up with fruit trees that barely produce, shrubs that
are growing tall and leggy trying to find light and a system that is fighting itself instead of
working. Here in the Azores with roughly 37 degrees north in summer the midday sun is high overhead.
In winter it's much lower on the horizon sitting further to the south and that difference matters
a lot especially with terrain like this down in the valley. So I'm going to draw two sun paths on
the base map. One for summer and one for winter. There are free tools online like SunCalc that will
show you the exact sun path for your latitude and I'm recommending using it. You don't need
to be perfectly accurate but just getting a rough sense of the arc is enough. So let's do summer
first. In summer the sun sits high in the sky and moves in a white arc from northeast to northwest
and the shadows from both ridge lines pull in tight to the base of each slope. Most of this valley
floor gets good midday sun through summer with a bit of morning shade along the eastern slope
and an afternoon shade along the western slope. In winter this changes significantly. The sun sits
much lower in the sky and moves from southeast to southwest. Now because of that steep eastern
incline the morning sun doesn't reach the valley floor until well after sunrise. This eastern
section loses most of its morning light from October through March. The western section loses
afternoon light early and the overlap zone in the middle and towards the south has the most
consistent light through the day. So we've now got both seasons on the map. The southern edge
gets the best of both. Good summer sun overhead and the best access to that low winter sun from
the south. The eastern and western edges are a different story particularly through winter where
it's shaded much longer and this is going to help us understand what species will do best in what
location. This is exactly the kind of thing that you can't figure out just by walking the land on
a sunny afternoon in summer. You need to map it or you'll find out two or three seasons later
why something never took off. With the sun angles mapped out the next thing worth marking is wind.
In a valley like this the terrain funnels it and once you know where it's coming from and where
it's already being blocked it changes how you think about what needs protecting. Those large
established trees along the northern western and eastern boundary are acting as a full
windbreak. The southern side is a different story. That's where our prevailing wind comes in straight
through the open end of the valley with nothing there yet to slow it down. So we've got the wind
from the south moving through this open section hitting whatever we plant and that changes things
because any gilt here is going to want some protection on that southern edge or at least
plants that can handle a little bit of exposure while the system gets established. So I'm planning
a windbreak on this side but because it's in the south I want to keep it low. Tall plants here would
end up shading everything behind it which is exactly what we don't want for our food forest.
With the sun and wind now mapped the last thing to get on this map is water. The main thing you're
looking for is whether any part of this section sits in a flooding zone, a drainage pit or anywhere
that collects and holds water after a heavy rain. Because if it does and you plant a gilt right in
the middle of it you'll find out the hard way the first time a big storm comes through. On our side
this is an important consideration. We're sitting at the bottom of a valley which means that every
property and every slope above us is draining through here. I've already seen what happens in
a heavy winter storm. The water comes rushing down the slopes and the lowest part of this section
floods. So I'm drawing that flooding zone on the map in blue right along this lower creek edge.
And if you're on your own land walk the site after heavy rain and look where water pools
and where it collects. Even a slight low point in an otherwise flat garden can become a problem for
the wrong plants. The good news is that once you know where the water goes it's one of the easier
things to work with. We can widen the creek slightly, move some soil around to guide the
excess water directly into it and make sure it has a clear path down to the lower part of the property
rather than spreading across our planting area. Now we could go much deeper than this. There's
frost pockets, wildlife pressure, views, pollution and plenty more depending on where you are. And
a lot of this comes down to paying attention to what's already happening on your own land.
If they come through at night you might want to consider fencing it. If you've seen frost sitting
in a low corner on cold mornings don't put your most sensitive trees there. The land is usually
already telling you what it needs. But keep it simple. Sun and shade, wind and water are the four
things that will shape the vast majority of your gild placement decisions. Get those on the map,
stay alert to whatever else is specific to your own situation and that's generally enough. So with
that mapped out let's figure out where to place our food forest gild. What I like to do here is
cut out a rough shape on paper that represents roughly how much space a gild needs and physically
move it around the map rather than trying to picture each option in my head. Now this isn't
exactly to scale yet because the real size of the gild depends on which main tree I end up choosing.
For example a chestnut needs a lot more room than a small apple on a dwarfing rootstock. But for
figuring out which general area works a rough average size is good enough. Later in this video
once I've got the tree picked I will come back and size everything properly around it. So let's try a
few different locations. This eastern corner has a lot of space but once I hold it up against those
winter shade zones this site is losing most of its morning sun from October through March. Now
that's not automatically a deal breaker for everything. A deciduous tree and deciduous
shrubs would actually be fine here. Since they are dormant through exactly the months this
site is darkest. But for evergreens that's a real problem since they're trying to photosynthesize
through winter with barely any light reaching them. So I could still use this location but I
would be limited in what I could plant here and it's probably not the strongest option on the
table. Closer to the northern boundary next to the existing gild lightwise this is actually a great
spot. It's getting much more sun than that eastern corner that we just looked at. But there's a
problem that has nothing to do with sun shade or wind. This is the main access road through this
whole section. The path that we use to get equipment materials and ourselves in and out of
here. And that's worth keeping in mind as you're doing this yourself. Sun wind and water cover most
of it but don't forget to check whether you're about to block your own access. Then let's have
look at this southern section toward the open end of the valley. The difference is clear straight
away. This has one of the best winter sun on the map by far. And the existing gild is far enough
back that the two systems can grow into each other over time rather than competing. And this spot
sits right next to that flooding zone. But remember we already widened the creek and redirected that
excess water earlier. So what would have been a problem here is kind of sorted. In this location
both evergreen and deciduous would work fine. But there's one thing worth thinking about before we
get to choosing the actual tree. If I went with something really tall here eventually that canopy
is going to start shading the gild behind it. So this is probably a spot for a smaller fruit or
nut tree and not a massive one. Just to make sure everything around it now and in the future
keeps getting the light it needs. The one thing this location still needs is a bit of protection
on the southern side from that prevailing wind. But a low row of shrubby windbreak species along here,
nothing tall enough to block the winter sun from the south, is easy to plant here. So let's use
this location. This is where the next gild goes. But just to show this wasn't the only option,
there's a room for another gild here too and potentially one more further along. Everything
else follows the same process when the time comes. And by the way if you are enjoying this
so far and want more examples like it with step-by-step instructions for your own land,
the workshop that I'm building walks you through this entire process. And if you want to know more
about it and know what the moment that we launch, the waitlist is in the description down below.
So now that we've got the location we can start to zoom in and start designing the gild itself.
For a section this size it helps to make a new base map just for this specific area. But if you're
on a smaller urban lot you probably don't need this. In this example it makes the process a lot
easier to work through. So here's what that looks like at scale. We've got the well house and creek
on this side, the trees alongside them and a part of the existing gild on this side. And with that
in place we have everything that we need to get started. The first step is choosing the main tree.
The main tree goes in first because everything else gets built around it. The shrubs, the support
species, the ground covers, all of it. And the size of the tree determines the size of the gild
and the shade it creates determines what can grow around it. So the first question is a simple one.
How much space do I actually have here? Because the thing most people don't do when they're
looking at a small tree in a pot is think about what that tree looks like in 10 or 15 years.
A chestnut can reach 8 to 10 meters in diameter at full maturity. Not to mention its height. That
is a big footprint. And if you plant it in a space that can only support something half that size
you're not going to have room for much else around it. An apple on a semi-dwarfing rootstock might
only reach three to four meters across and only a couple of meters tall. It's the same principle
but much smaller footprint and much more room for everything else around it. So on the map if I place
the chestnut here drawn at its mature canopy size you can see straight away how much space it takes
up. The summer shade is like this in the morning and moves around here in the afternoon. In winter
the chestnut drops all its leaves and lets more light through which is worth knowing. But in summer
when everything is in full leaf that chestnut creates a lot of shade and takes up nearly all
the space. Anything that wants full sun on the shadier side is going to grow tall and laggy
producing far more leaves than fruit. Now swap that out for the apple on a semi-dwarfing rootstock
drawn at its mature size. Straight away there's much more room on all sides. The shade is there
but it's much less and more manageable and we can add in shrubs, herbs and other plants around the
main tree. Now of course you can manage the size of a larger tree by pruning it and keeping it
much smaller than its ultimate mature size. But understand that it's a trade-off. It means
yearly maintenance, more hands-on time, season after season and if the whole reason that you're
building a food forest is to create something that eventually runs itself that's worth thinking about
before you commit. Now for this location I'm going with a small variety of a fig tree. It fits the
space at maturity, gives us a room on all sides for everything that we want to add after it and
will produce well in this climate without needing a lot of fuss once it's established. One more thing
before we move on is pollination. Some fruit trees are self-fertile and will produce on their own.
A lot of them are not and if you plant a tree that needs a pollination partner and there's nothing
compatible within range you can wait years for fruit that never really comes. So check before
you commit. If it needs a partner either plan for a second tree somewhere nearby or make sure there's
already a compatible variety in the area. It's very simple to check up front and a frustrating
thing to discover a few seasons too late. Now once the main tree is placed we start by adding
the shrubs and where they go and which ones you choose depend entirely on the tree that you've
chosen. Get the tree right first and the shrub decisions more or less follow from it. And this
is where it's easy to get it wrong because you can pick a shrub that you like and plant it wherever
there's a gap but a few years later it's growing tall and laggy producing almost no fruit and way
more leaves than it should have. And that's what happens if you put the right plant in the wrong
place. And the fix isn't complicated it just needed to be planted on the other side of the tree. So on
the map you can see that we have all this empty space around the tree and I'm placing four shrubs
around this tree. Two on the northern side and two on the southern side. Now this isn't some rule
carved in stone you could use two you could use eight it's really up to you and the space that
you've got. But four laid out this way is a nice standard layout. It gives you a good spread around
the tree without crowding it and still leaves plenty of room underneath and in between everything
for the lower layers that we'll start adding later. So the herbs the ground covers and the
root crops. On the northern side of the tree where there will be the most shade I need species that
can handle lower light conditions. For example black currant and red currants would work both
very well here. They're shade tolerant more so than most fruiting shrubs and they produce well even
without a lot of direct sun. And the first thing to notice is that I'm not putting them directly
north of the trunk. Because directly north puts them right in the path of the future canopy.
As that canopy fills out over the coming years those shrubs will gradually lose light until
they're sitting in heavy shade for most of the day. So I'm moving them slightly to the sides
just outside of the future drip line where they will hold on to enough light even as the tree
matures. On the southern side where there's the sun most of the day I can use a species that
actually want it. A Nanking cherry here which is a cold climate cherry bush. It's quite compact
very productive in a position like this. And maybe a gooseberry alongside it which does well in full
sun and doesn't need much attention once it's in. You could add more a couple on the east and
west sides that would work fine. Two shrubs would work also. But four laid out like this gives you
a solid starting point with room to move around the guild comfortably and plenty of space left
for everything that comes next. So we've got the main tree and four shrubs in place and that's
already a decent start. But what we have right now is a collection of productive plants. We've
got a tree some shrubs each doing its own thing. What we don't yet have is a system. Right now
nothing in this guild is actively building soil fertility from within or creating a kind of
beneficial microclimate that helps everything else around it thrive. That's exactly what support
species are for. These are fast growing plants often trees whose main job isn't to feed us but
it's to feed the system. And a lot of them they fix nitrogen which means that they pull nitrogen
from the air and deposit it into the soil where the fruit tree and the shrubs can use it. And most
of them grow fast enough to produce a lot of biomass that we can chop and drop right around
and let it break down into a slow steady fertility cycle. Over time this is what turns a collection
of individual plants into something that actually sustains itself. On the map I'm placing four
support species in between the shrubs a little closer toward the trunk. And again this number
isn't fixed. One would already make a difference. Eight would work too if you've got the space and
you want faster coverage. Four just gives this guild a good even spread without it feeling
crowded. And as you can see I'm not drawing these to their mature size because they are not
permanent. They are pioneers. Their job is to get the system going fast, build the soil and create
some shelter while everything else gets established. Mostly by chopping them back hard once or twice a
year and dropping all of that material right on the ground. Once the main tree and shrubs are
strong enough we either keep managing them this way or we start to phase them out gradually and
let the canopy take over that space. And with the support species in place the permanent structure
of this guild is essentially set. We've got the main tree, the shrubs, the fertility system built
around them and now we fill in everything underneath. I work through the lower layers
from the highest to lowest. So I start with the herbaceous, then the ground cover and then the
root layer. And for each one the same two things guide where everything goes. How much light that
spot gets and how easy it is to reach when you want to harvest something. First we have the herbaceous
plants. Perennial vegetables and non-woody herbs that come back a year after year without a
replanting. So think of artichokes, rhubarb, lemon balm, oregano, thyme. You can also include woodier
herbs like rosemary or lavender if you're harvesting from them regularly. They stay naturally
compact. So I'll place a few of those as well. And this layer often gives us more than food. These
plants are doing multiple jobs at the same time. Some attract pollinators, some repel pests, some
build fertility right here at ground level. Take comfrey for example. It has deep tap roots that
mine minerals from further down in the soil. It produces big leaves that break down fast when you
chop and drop them. And the flowers are absolutely loved by bumblebees. So it's pulling in pollinators
right where the fruit tree and the shrubs need them most. Alongside comfrey we can use things
like chives, chamomile, borage, calendula. They all earn their spot. And there are so many more options
in this layer. So don't let it overwhelm you. A few well-chosen plants that are doing multiple jobs
will always outperform a crowded collection of things that you planted because you read they
were supposed to be good. So start with what you can find, what grows well in your climate, and then
let it fill in naturally. Then we have the ground cover layer. Bare soil in a young food forest works
against you. It dries out fast, weeds move in, the surface hardens. And a good ground cover fixes all
of that once it's established. We can place strawberries towards the outer edge where they get
decent light and are easy to harvest. Nasturtiums spread everywhere in between and they are edible,
flowering for months. They're pretty plants and they fill whatever space you give them without
becoming a problem. Same placement logic as before. Sun loving ground covers on the open sides,
shade tolerant ones closer in, and always with an eye on access. Then we have the root layer. They
use the soil beneath the gilt that would otherwise just sit there doing nothing. Perennial onions and
perennial garlic are the easiest starting point. They come back every year, barely need any attention
and you can harvest them without disturbing the rest of the gilt. Yacon is another great option
if you want more yield. Big tubers, fast growing, and the leaves are useful for chop and drop too.
Sun chokes is extremely productive, just worth knowing up front that it spreads enthusiastically.
So I place it where I can keep an eye on it rather than right in the middle of the gilt.
You don't need every spot filled before you plant. Even a few well-placed herbs,
a couple of ground covers, and some tubers are a good starting point. The rest fills in season
by season as you learn what thrives in your specific location. And the last thing I want
to add inside this gilt, which is something easily forgotten when designing a food forest,
are annuals. The perennials that we've been placing, they take time. The tree needs a few
seasons to establish. The shrubs need a year or two before they start producing. Even the
herbs and ground covers need time to fill in properly. And annuals are exactly what bridge
that gap. Lettuces, beans, corn, pumpkins, courgettes. Fast growing plants that go from
seed to harvest in weeks or months. In the early seasons of a young gilt there is plenty of
sunlight available because the perennials are still small and the canopy hasn't closed in yet.
So we might as well use that space. I place them throughout the gilt where the light is best and
they're easy to reach without stepping over everything else. They're not permanent here and
they will naturally get harvested out as the perennials grow and the canopy fills in. And by
the time that happens the perennials will be producing properly. This is a simple way to make
sure this gilt is feeding you in the first months, not just from year three. And that's the design.
From here we can make a simple plant list, source everything, start prepping the ground and plant
everything. And once this one's settled you do the same thing again and again. Right next to it or
wherever the next logical spot is on your land. Different tree maybe next time, different shrubs,
whatever makes sense for that location. Just one gilt done well and then repeat it. And over time
those gilts connect. The system starts to run itself and the whole food forest gets more abundant
and more beautiful with every season. And if you want to take exactly what you've seen here and
apply it to your own land, make sure to join the wait list for our upcoming workshop that walks
you through this entire journey. The link's down in the description below. But there's still a
difference between having it on paper and then actually getting it in the ground. So if you want
to see exactly how I plant an entire food forest gilt from bare ground all the way through fully
planted, make sure to watch this video next. Because in that video I go through the whole
process from prepping the ground to planting the food forest. And as always thank you so
much for watching. I hope it was helpful and happy forest gardening!
