This is coming a bit later than I wanted, but finally was able to wrap up my assembly & flight review for the E-flite Viper 90mm EDF. This is such a nice flying EDF jet and with Smart 7000mah packs, you can get some excellent flight times from it. Point this one where you want it to go and that's where she goes! :) Full article with CG and control information at thercgeek.com/EfliteViper #ViperJet#TheRCGeek#EfliteRC
AI Generated·May contain errors
Video Summary
AI Generated
Chris from TheRCGeek provides an assembly and flight review of the eFlight 90mm ViperJet. He praises the aircraft for its fantastic performance, true tracking, and ease of assembly. The jet is described as a larger, faster, and more responsive version of the 70mm model, featuring a 55-inch wingspan and a 90mm EDF, making it an excellent choice for aerobatics and slow flight.
Hey everyone, Chris here, the RC geek coming to you from the shop, and this is my assembly
and flight review for the eFlight 90mm ViperJet.
This is a really great flying airplane.
It's a good size.
You've got a 55 inch wingspan here, and you've got the 90mm EDF in there.
And you know, the performance, the looks, it really is the whole package.
You know, the performance is fantastic, and it tracks extremely true in flight.
Now, in true eFlight fashion, the assembly is extremely quick, and that starts with the
horizontal tail.
That just drops into place, and you've got four studs in there to receive screws.
And so, you drop the tail in.
There's two screws that hold that horizontal tail, and then when you drop the vertical
tail into place, there's two screws at the back, and then one forward in that leading
edge extension there, and that holds the dorsal in place.
Now, from there, the wings slide in over two carbon spars, and they're held in place with
two screws each.
To finish it up, you just clip the ventral fins into place, and that's it.
And so, on the bench, you know, the airplane really looks good.
It's got a similar paint scheme to the 70mm, except the red accents versus the blue.
The red does look good, and it shows up really well in the air.
Now, I do wish that the white areas were painted white versus the bare foam, but that being
said, it still looks good, and it's got a really nice, smooth finish to it.
Now, in terms of the features, you've got the full shock-absorbing landing gear.
Those work extremely well.
You've got a nice, big canopy hatch, a really large battery area, and so, you know, you
can fly a myriad of sizes of packs, and then, the other thing is you've got the slotted
flaps here.
They've got an external hinge, and then, so when they deploy downwards, you've got a nice
flow-through slot.
Slow flight on the airplane is quite excellent.
So, the model features safe, if that's something you're looking for.
You've also got the full smart telemetry, but with that comes the option for reverse
thrust.
So, if you're wanting to set that up, what you do is when you've got the airplane all
programmed, you scroll through the telemetry windows all the way to the right, okay?
That will take you to the ESC setup window, and you just follow the instructions.
So, you hold up elevator and left aileron for five seconds, and up elevator, right aileron
for five seconds.
You just follow the instructions on the screen, and then, that will enter into the menu.
Now, you have to use your elevator stick to scroll through the menu, and essentially,
you just want to set up your reverse thrust.
You want to assign that to a channel.
So, in my case, I assigned it to channel eight, so when you go all the way down, you hit exit
with save, you have to ensure that that channel, whatever channel you assigned it to, is assigned
in the channel assign menu, and then, in the digital switch setup, you set up a digital
switch on that switch you've assigned.
In my case, I assigned it to switch D. The other thing is when you set that up, with
reverse thrust off, it's set to minus 100%, and then, with reverse thrust on, it's set
to 100%, and you may have to experiment with that a little bit, but that's really all you
have to do.
It's a fun feature to play with, for sure, and it really shortens up the landings.
So, with that said, you know, in terms of the controls for the elevator, 12 millimeters
up and down with 12% expo.
For the ailerons, 12 millimeters up and down with 5% expo.
For the rudder, 22 millimeters left to right with 25% expo, and that helps desensitize
the steering, mostly.
And then, for the flaps, I'm at 25 millimeters at the mid-flap setting, and 45 millimeters
at the full-flap setting, and there's no elevator mix required, which is really nice.
For the batteries, I'm using the Smart 6S7000 pack.
Really gives excellent flight times, and that's pushed about one and a half or so inches forward
of the receiver mount that's in the hatch area.
That CG equates to approximately 115 millimeters as measured from the wing root leading edge
aft, and so when you look at the wing, there's the plastic mount piece there at the root
leading edge, and it's essentially just 15 millimeters back from that, and it's just
forward of the front wheel well on the bottom of the airplane, so that's kind of your reference
point for you.
You know, flying the airplane, this is an extremely good flying jet.
It's like the 70 millimeter, but bigger, and so it flies bigger, it flies faster, and in
fact, it lands much nicer, too.
Just generally a bit more responsive, and it slows down better.
Otherwise, you know, knife edges all day long, nice axial rolls, point rolls, any of that,
and actually, it'll do a pretty violent snap roll, too, which is pretty fun, and so the
other thing is the slow flight of the model is extremely nice, so you put the flaps down,
and you can just go, you know, slow flight, figure eights, whatever you want to do, and
it's happy to do it.
The other thing is with the nice wide gear stance, it takes off extremely easily, tracks
really true, and then on the landings.
The only thing you do have to be careful of is getting it a touch too slow on the landings
in the flare.
I found that it'll approach just beautifully, but if I pull the power back too soon, and
then flare it a bit too hard, it'll drop a wing on me, so I've scraped a couple wingtips
in the process, so the key is to kind of keep that touch of power all the way down through
the flare, and it'll really give you a nice touchdown.
And so in terms of my timer, I have my timer set at four minutes, which is kind of my warning,
but I'm usually flying five plus minutes with the model.
All right, so with that said, let's take this out to the field.
We'll give you guys a flight, and then we'll come back, and we'll wrap this up.
All right, there we have the eFlight ViperJet 90mm.
This is a really nice flying airplane.
I can't say enough good things about how well this airplane flies.
It tracks extremely true, it's aerobatic, nice and axial in the aerobatics as well.
The airplane has very similar characteristics to the 70mm, so if you're proficient with
the 70 and looking for something bigger, I think you would probably do okay with this
model.
Just do bear in mind, it's bigger, it's heavier, and so the airplane is going to feel bigger,
and it's going to take up more airspace as a result.
That's it for this video, guys.
Thanks so much for watching.
Don't forget to follow along on social media at TheRCGeek.
Subscribe.
Until next time, I'll see you.
It's Viper time.
See, it's an homage to a previous video.
Yes.