Making CARBON FIBER E36 DOORS without any experience

Tuning Pro
54 followers
#GJWcars #GJWauto #Customizingcar #tuningcar #howto #DIY #CarCustomization #upgradecars #editcar #wrapping #bodybuilding #bodycar
AI Generated·May contain errors
Video Summary
AI GeneratedThis video documents the technical process of fabricating custom carbon fiber doors for an E36 project car. The goal is to create a lightweight, street-legal replacement for heavy steel doors while maintaining full window functionality. The project evolves from a learning exercise into a complex build involving vacuum infusion, 3D printing, and precision assembly.
All right so we made this little carbon piece and that got us thinking
What can we make?
A carbon fender
So that got us thinking
How hard can it be to make a door?
Don't drop it
It's actually pretty difficult
Now this is the E36 we've been building the past few months
Now don't get me wrong, it's not a race car
However, it's not far off
We're trying to make something street legal
Something in between a real super touring car and a daily driver
Preferably the best of both worlds
Now engine wise we've got an S54 in here
We've rebuilt it, we've upgraded it
Hell, we've even and remodeled, re-engineered the fuse box
Exciting stuff, I know
A couple episodes ago we decided to tiptoe ourselves into composites
By making a little sender console
Which worked out a little too well
Which got us cocky and thinking
Hey, sure, we can make some fenders
Now not just any fenders
Now when this succeeded
And that might have not been on the first or second or even third try
But we did succeed in the end
We thought, hey, if we can tackle that
How hard can a door be?
Now you might be asking yourself
Why the hell would you take on the task of making composite doors yourself?
Well, it is simply because just like the fenders
What we want isn't available
You see, we want a couple of things
First up, we want to have a functioning window
Because having a slider window, it sucks
And it's for race cars
And this obviously is not a race car
Second of all, we want to have doors that fit correctly
We want the absolute best fitment we can get
Third, most important of all
We want to have a visual carbon layer on the inside
And as far as I know, nobody makes them like that
So we figured making fenders makes us qualified enough to make doors
Because how hard can it really be, right?
First up, we're gonna see how much the original door weighs
Don't film me, you know, the car
You can turn me on with just a touch, baby
All right, we've fully stripped down the door
Cleaned it up, removed all the grease
And now we can take a mold from it
Now, before we continue, however
We're gonna quickly sand it down just a tiny bit
Get rid of some of the imperfections
And more importantly, get a matte finish
Because whatever finish we leave on the door now
Is also gonna be the finish of the product we take out of the mold
So we want to have a nice and matte finish
So, after finishing all the flanges and getting slightly distracted
We're now ready to actually put on the gel coat
So we've put on the flanges
We've applied a wax again in all of the corners and edges
So the gel coat itself doesn't go into any negative spaces
And locks itself into place
And lastly, we've applied a release agent
So the gel coat itself doesn't bond to the thing we're trying to replicate
So now we're gonna put on a couple layers of gel coat
Followed by a reinforcement layer of thinner fiberglass
And then four thicker layers to really give it its final strength
After which we can let it cure for 24 hours
Take it out and move on to the other side again
But obviously, we're starting with the easy side
This is how we do it
It's Friday night
And the party's here on the west side
So I reach for my 40 and I turn it up
I'll designate a job and take the keys to my truck
Hit the shop cause I'm faded
The honeys in the streets ain't money, yo, we made it
It feels so good in my hood tonight
The summertime skirts and the guys in kanai
All the gangbangers forgot about the drive-by
You gotta get your groove on before you go get paid
So tip up your cup and throw your hands up
And let me hear the party say
I'm kinda buzzed and it's all because
This is how we do it
Ooh, South Central does it like Normandy does
This is how we do it
You are my neighbor, you got much better
This is how we do it
Let's flip the-
All right, it's now another 24 hours later
And we can flip it upside down and start on the other side
Because what we're doing is we're gonna keep the door inside of this mold
Flip it around and use the flange of this mold
To make the other mold against, if that makes any sense
So instead of removing the door
Starting all over again with a blank door for the other side
We're gonna leave it inside of the mold
And basically make a shell on two sides of the original door
So we have part A and part B
I'm not sure if that works
But it seems like the easiest way
Because it prevents us from having to make new flanges on the other side again
Since we can simply use the flanges that we've just made
They're electric
This is how we do it
Ooh, South Central does it like Normandy does
This is how we do it
You are my neighbor, you got much better
This is how we do it
South Central does it like Normandy does
This is how we do it
You are my neighbor, you got much better
This is how we do it
And I'll never go out going on a school trip now
This is how we do it
And I'm kind of bummed it's all begun
All right, plugging all the holes with wax on this side
Took about three times as long
It was not fun at all
Because there's so many holes you have to plug
Either way, we're gonna continue
We're gonna apply some release agent
And then start on the gel coat again
Same as the other side
Just the same exact process
And then we can take it apart
See if we won something
And now both parts of the mold are completely finished
We have the inside skin and the outside skin
However, before we take it out
I want to reinforce the outer shell a little bit
Because the inner shell and mold itself
Have a bunch of different shapes in it
So it's really strong on its own
However, the outer shell is basically just a flimsy flat piece of carbon
And the same goes for the mold
The mold itself can be really flimsy if we take it apart now
So what we're going to do for the outer shell
Is make some extra wooden reinforcements on the top
Bond it together
Make sure it doesn't twist around
Because the outer shell and the outer mold
Is going to be our reference point for when we actually assemble the doors
So I want to make sure this stays in the exact curvature it's in right now
So we're gonna look up some more instructions
Then we're gonna wing it
And hopefully by the end of the day we can unpack the two molds
Just pop right out
All right, so we have two production-ready molds
Honestly, this came out so much better than we personally expected
Because we pretty much made two molds at the same time
So if it's a failure you don't really know until you unpack it
And fortunately this was a massive success
At least I see it as a massive success
There are two or three spots in the mold itself
Where the gel coat we used actually came loose again
When taking out the steel door
So it was still bonded to the steel door
One of them is right here
Which we're gonna fill up with wax
And then on the final product we can send it back
You won't see anything of it in the final product
And all of the other spots are in areas of the carbon
That are gonna get trimmed after we made the product
For example in the door or the inner skin of the door
There's a tiny little hole in the part
That is gonna get cut out of the carbon again
So it doesn't really matter
It's not something that's gonna come into the final product
Just in the thing we're gonna produce right now
Now the way we're gonna do this is with the infusion process
If you're not familiar with it
As we weren't another episode ago
It's actually pretty simple
In theory you just put dry carbon into the mold
You put it in a vacuum bag
Put it under vacuum
And then you kind of suck in epoxy from one side
Into the mold out the other side
And this is gonna replace all the empty voids with epoxy
The alternative method is a wet lay
Where you just simply put the carbon into the mold
And really brush in the epoxy manually
However that leaves a lot to be desired
You get a ton of air
And really the finish isn't as good as we want it to be
So we're gonna start up
We're gonna start laying up the carbon into the molds themselves
So far this is nothing we haven't done before
It's actually simpler because this is just a single piece
Just like that
Then there was three parts
So in theory this should be easier
All right, cue the music
All right, so yesterday we completed the layout of both the inside and the outside skin
Now that was an absolute piece of cake
Basically just a flat layer
This one however with all the curves and shapes
A bit more difficult
Hence why we're now a day later continuing the work
As you can see we've applied a white fabric on top of the carbon itself
And this is a so-called peel ply
Because we're going to be adding another element onto this carbon stack really
Which is a infusion mesh
Because you see even though the carbon is just weaves of fabric
And epoxy can run through it
It will be extremely slow
And to really speed up things we're going to be using this mesh
Which is kind of same thing as a fabric
Just with more space in between
And this will allow the infusion and the epoxy to go throughout the carbon part much faster
However, if we just apply this on top of the carbon
This will bond onto the carbon itself
With all the epoxy
You're gonna end up with a really heavy part
And the inside is going to be aesthetically unpleasing
So in short we have three layers of carbon
Followed by this peel ply
And then on top of that the flow mesh to really speed things up
We're then going to include an inlet and an outlet
And on the inlet side we're going to apply a spiral tube
To really spread out the starting point of the infusion
So the epoxy doesn't just have to start from a single point
It'll just speed things up to the other side and just flow towards the exit
And that is pretty much all there is to an infusion process
Right, the bag
Then you just simply, very carefully
Have to make a seal proof airtight bag for the infusion
Which, by all accounts, is the most difficult part of making carbon parts
Who would have thought?
Just bagging it up
Some double-sided tape, you put some plastic on it, it should seal
Should
So, you're gonna see us figure out this mesh and this stuff
And it's just gonna go smooth sailing
And then you'll probably see us make a couple of bags
So yeah, let's grab the plastic and do some fun stuff
Alright, I call that a success
And this is by far the most tricky part
So we're gonna unpack the easy one now
And other than that it's looking pretty fantastic to be honest
Alright, this one was much easier
Because we were pulling the peel ply and it already came loose
Alright, so we have two pieces of the puzzle
Now the fun part begins
Somehow these two simple sheets of carbon are gonna have to form a functional door
And not just any door
Because we want to make the perfect fitting carbon doors
With a completely functional window mechanism inside
So the plan is we're gonna trim these up
And then we're gonna cut open the old original door
Because the original door isn't made of two skins
There's a third layer in between those two
Where the window mechanism and the guidance rails for the actual window sit
So we're gonna cut it open, do a little autopsy
And see if we can maybe either copy some parts
Scrap some parts or reuse some parts in order to make the windows function
Because the last thing I want is a plastic window with a slider
We want to retain all the original functions
That means I want the exact functions of the original door
Except I want it to weigh half the original or less preferably
So we're gonna put on some gas mask
Trim up these edges a little bit, not too much
Because we want to make sure that we leave enough room for the fitting
And then we'll loosely hold it up against the car to see what it's gonna look like
Yeah
But now something I've been wanting to do for a long time
How good does that look?
Everything's loose by the way, nothing
Everything is just smoke and mirrors
A lot of smoke
Smoke comes naturally when S54
So I want to match the fabric to this
And we did, except you're working from the inside out
So it matches like this
See?
See, I've done such a great job, it just took on the bright side
We can try three more times
Alright, I've been stalling because it's time to go to more cutting
Because trimming this and the inside piece took all f***ing day
Because obviously you gotta bond the two halves together
You gotta make sure that when it's bonded together, you get the right thickness
And the problem with that is you have to just trim it down really carefully
Not going through the weave, as I've done a couple of times almost
I didn't, not yet, anyway
There's...
You won't ever see it
Alright, so in our quest of trying to make the perfect doors
We want to retain all of the original door functions
Most importantly, the window mechanism
Now, for that, we need more than just the inner and outer shell
Originally, the door is made up of three or more layers
There's one more layer in between the inner and outer shell
Which we deemed unnecessary
And now we are going to open up this shell
Because there's some guidance rail in between the two layers
And we can see if we can either reuse them or replicate them
And see what else is in this shell that we need in order to reuse the windows
And if you're curious why we're not keeping the door
It's because it's already ruined
You see, in order to make the mold, we needed to cut off threads here
The threads for the hinges
With the threads still in here, we couldn't have made the mold
So we had to cut them off
And there's no way in order for us to put the threads back
So in order to make the molds, we had to sacrifice the door
So the door is ruined anyway
So don't hate me for destroying a perfectly fine door
Compared to Mark's car, this is just a good door, okay?
Sorry, Mark
Alright, so I've opened it up just a little bit
And here you can see this is the part we have
And this is the outer shell or inner shell
Now, the things we need for the window mechanism are this guidance rail
Now, the plan is, I think, to drill it out and simply reuse it
Because it's such a tiny part, it cannot weigh more than 200-300 grams
And now on this side, we have another part of the rail that comes out of the door
It bolts onto these two parts
So we're gonna drill out these little tabs
Simply glue them back into the carbon shell
At least that's the plan for now
It makes sense in my head
I mean, I've made a dozen carbon doors by now
Look, we made four right hand side fenders
One left hand side, that's a massive improvement
And we've made...
Yeah, that's it
We're qualified, we can do this, no problem
And if we don't succeed in the first one, we got three more
And then there's your car
So, unfortunately, the door didn't make it
But we managed to get what we came for
All right, it's now time to actually put the door together
Now, there are a couple of things we extracted from the original door
The first and foremost being this guidance rail
This is what combines the two halves at certain points
And it provides a guidance rail for the original window
So we've drilled it out, we've trimmed it a bit, give it a little paint job
The other two things we extracted are these two little brackets
One of them goes in here and one of them goes here
And they support this little rail
Now, and lastly, there was some amount of escalation
You see this profile, this houses the seal rubber on the outside of the window
And for how simple it is, it was just way too heavy
Don't ask me how we make that exact judgment
It's more about that we can make this profile
However, we cannot make this profile
So, what we've done is we've remodeled it and 3D printed it
And together these weigh just over 60 grams
So that's 300 grams saved by switching this one out for these
Now, one of the heaviest pieces, the actual window mechanism
Honestly, there's not too much we can do about this
I'm sure we can drill it out a bit, but honestly, it's really not worth the trouble
Here we have the inside skin
And these are the parts we're going to glue back in
So, first up we got this guidance rail
And you can see the rail goes from here, here to here
And then there's another piece that goes here, which we don't have, doesn't matter
And then this part sits right here
And for that we've taken out this little piece where this slides into
Like so
And then finally this little bracket where this goes
And that's pretty much all we need to make a functioning window mechanism
So, we're gonna glue these parts in and then figure it out as we go
Yeah, no, the plan is to glue this in and then fit the window regulator
Fit the window seals and see if we can get it to work like this
Before we seal up the coffin and we have to cut it back open
I got a lesson plan for all my past mistakes
I swear I'm proud of all my best and my worst days
Proud of all my feet when I touch the ground
From the A to Beijing, man, they know the sound
I know I make mistakes, but my mama proud
Fans scream my lyrics out in the background
They know me dead
They say life's a gamble, you gotta roll the dice
I risked a lot of different things just to live this life
Live this life, done bad, you gotta pay the price
That's one small step for man, one giant leap for mankind
And that supposedly is one functional door
Except the outside then, but
Check this
Don't be fooled
This isn't years and years of hard work
This is pure luck
We didn't adjust anything
Normally, you spend hours digging around with this
Adjusting this
Adjusting this and this
I'm sure we're still gonna do something, but
Okay, I'll take it
Right, so with this dry, we can now show you what it's actually for
So originally, when you have the window here
There's a weather strip to keep moisture and rain out of the door
Now for this, you need this
And this goes into this steel profile
Which sits like this
This is the outside skin of the door
But it's way too heavy
So now that we have this 3D printed part
We can simply install it as if it was original
Making it look a ton nicer than having some gap here
Or a bunch of glue or god knows what else
All right
After double checking, triple checking, quadruple checking everything twice
We think we're ready to weld them together
I'm not sure what more we can do at this point
Except just toss it in
Apply some glue
We've applied some tape so we don't glue everything to the mold itself
And at this point, we're gonna apply some glue along the edges
Put the outer shell or inner shell back onto here
Apply some clamps
Wait 24 hours
And unpack our new perfect carbon door
I think
All right, it's the moment of truth
It's 24 hours later
And either we got a finished product or we're gonna start over
In which case it will be troublesome because the video has to be live next week
It held up pretty nice actually
It ain't stupid if it works
I don't want to face any possible consequences of my own actions
I'd rather not
How does it look?
Oh, hello
Did we actually...
Did we actually make a door?
I think we did
That is crazy
It honestly looks really good
Like...
So this is the beauty of using this piece of metal in between the two skins
It makes it sturdier and we can reuse the original seals
Which unlike a lot of other composite doors just makes it look so much nicer
And honestly, I wouldn't know how else to do it
So I'm acting as if it's like this really wise decision was my only option
Oh, that's cool
That is really really dope
All right, so weight savings wasn't exactly our primary goal when making carbon doors
Even though we packaged it as a weight savings ambition
Now my primary concern with the plastic windows was the actual tint
You see it doesn't really show up all too often
But when you really look at the glass of a car you see it's really tinted
And one of the things I hate is when you have a race car or semi race car
And you look at it from the outside
You can really see how fake the windows look
And it just breaks up the car a bit too much
So I have managed to find someone who could tint these plastic windows
They have a really nice OEM looking green tint to them
It just looks so much better than a completely clear one
They came out looking absolutely fantastic
And the weight savings is magnificent because these are three and a half kilos
These are just one and a half
Now is switch out these little aluminum profiles
Put them on these ones
Now these are not exactly made for disassembly
So we're gonna dig around see if we can remove these
While keeping the glass in this shape
Alright now before we can do the final assembly of the door
We're gonna paint it
But before we can get to actually painting it
We have to do some finishing up
You see between the inner and the outer skin
We've glued them together
At certain points there's still a tiny gap
There's no problem at all
We're gonna fill those up with epoxy
After it's dried up we can just sand it back down
Continue sanding the entire thing and get it ready for paint
Now we are going to do a clear coat
I'm still choosing between a satin or a matte finish
It's not going to be a glossy finish because
I just think it looks tacky
So we're going to go with a satin or a matte finish
And we're only going to do the inside
So we're going to clear coat the inside
And the outside is going to stay raw
And that is because of my indecisiveness
Because I really don't want to paint over the outside just yet
The final goal is to have the entire car painted in red
Hell of a red
However, for now I'd really like to keep it carbon
Because the more carbon pieces we add the cooler it looks
And who knows you might end up with a full carbon E36
Might have said too much there
So we're gonna get on with epoxying the sides
Sanding it back down
Get it ready for paint
After which we can finally install everything else
Do the finishing touch on the outside
And show you the finished result
Because it's gonna look even better than what we've just shown you
Empty delusion lost in the fire below
When you come running your eyes will be open
And when you come back I'll be as you want me
Only so eager to be
My little song will keep you beside me
Thinking your name as I sing
Bring it back, sing it back
So at this point you've seen we don't just have one door, we actually have two
And there's a good reason for that
Well, besides the fact that we need two
There's a more practical reason
You see, at first I was really hesitant on making carbon doors
Simply because the time investment is not just high
It's insane
Like there's no way this ever makes any sense
So at first I was like we really cannot do it
It's just it just takes up too much time
And that is when Tjoe sandbagged me into...
Well, he tricked me
He tricked me in a very very very sinister way
He said we should have some more experience making carbon parts
We should make something very simple
A simple flat piece
This is that flat piece
So he tricked me into we'll just make the outside shell
We'll just make the outside shell
And we did
And it went great, went pretty easy
And then he said pull it up against the door
And right there I saw it
That's a carbon door
And that's how Tjoe tricked me into actually starting this crazy project
That's when we started recording the entire process because...
I was that sure we weren't gonna do this
So we didn't even bother recording making the first outside shell
So we painted everything
We assembled everything
We can completely assemble both doors
Put them inside a car
And do the rear doors some other time
Because honestly if you guys still want this episode this year
We are gonna make the rear doors 100%
Because after seeing this how could we not?
Except the episode where we're gonna be doing that
Is not gonna be the main focus of carbon
We're gonna just put it in between some other episodes
Like as a side project
Because you know how we love to do those
Let's start assembling it
See what the final weight is
See what it looks like on the car fully assembled
Yeah, I really didn't think we'd ever get to this point
But here we are
I'm going through a drought
You don't even have to do too much
You can turn me on with just a touch
Baby
I'm a collapse in cities cold and empty
No one's around to judge me
I can see clearly when you're gone
All on my side
Ooh, I'm blinded by the lights
No, I can't sleep until I feel your touch
I said
So, there's just one thing missing here as you can see
And that is the door card itself
Now, these are the original door cards I had on the car
I went all fancy and did some amaranth cloth on here
And it looked pretty well for what it was
Now, to give you an idea of what it looks like on the doors
I'm gonna quickly hold it up because all the clips are broken
Still need 36, okay
So, yeah, that is the general idea
Yeah, we could have cleaned it before filming this
But the reason we didn't is a very good reason
You see, I wanted the roll cage to be out as far as possible
And that's come to bite me in the ass now
Because the door hits the roll cage right here
So, these door cards
Even though it looks great on the carbon doors
We're not gonna be using these ones
These are not in this shape
No, it's not...
We're not making this into carbon
That would not be classy
You don't put carbon door cards on a carbon door
You put carbon door cards on a steel door
You put original door cards on a carbon door
That's classy
They really are light
This is how we do it
It's Friday night
And I feel alright
The party's here on the west side
So I reach for my 40 and I turn it up
I'll designate a job and take the keys to my truck
Hit the shop cause I'm faded
The honeys in the streets ain't money
Okay, so it wasn't quite the little project we had in mind
But then again, that's just how things go on this channel
So, we made the front doors
Rear doors are gonna get made somewhere in the future
We're not gonna worry too much with the details of that
Because we got bigger fish to fry
Dumber projects to make
Bigger delusions to undertake
Now, should we keep the car carbon looking like this?
Not glossy carbon
But a mixture of satin and matte raw carbon finish
Like some of the GT3 cars you see
Or should we wrap or paint the outside red?
Because I really like the look of this so far
The rims are temporary
We're gonna change those up, don't worry
But we did make a prototype aero disc on the rear
Just like the original cars
It needs to be a little bit bigger
But I think this is something we're gonna do with the trapstone
Now, if you think this was a bad idea on its own
Just going into making the door without any real world experience
Just wait until you see what we have lined up after this
Because, you know, we've been having too much wild ideas
And not enough setbacks to put us back into the realm of reality
So we got a bunch of really stupid ideas lined up
And honestly, I cannot wait to show you guys what we got coming up
And let me give you a little hint
The roof still isn't glued on
That's all I'm gonna say
All right, so that's gonna be it for this episode
This was quite an adventure to say the least
So I want to thank each and every one of you for watching all the way until the end
And if there's one thing you want to do to help us out
Hit that subscribe button
That more than anything helps us grow as a channel
And allows us to do more stupid ---- like this
All right, this is one of our best ideas to date
