6 Fundamental Rules Every Beginning Wood Carver Should Know (Relief Carving Tutorial)

Carving Art Channel
11 followers
AI Generated·May contain errors
Video Summary
AI GeneratedJames Hamilton provides a comprehensive introduction to relief carving using a dogwood blossom project. He emphasizes the importance of material selection, such as Basswood or Butternut, and outlines fundamental technical rules regarding wood grain, tool physics, and 3D visualization to help beginners avoid common mistakes and achieve realistic results.
Hi, I'm James Hamilton from Stumpin' Up's Woodworking Journal, and I'm here to get you
started in relief carving.
In the July 2016 issue of Stumpin' Up's Woodworking Journal, you'll find a video that discusses
four things you need to know to get started in wood carving.
That video covered tool selection, making a mallet, tool sharpening, and choosing your
first project.
Today, we'll begin that first project, and I'll give you some basic tips that will help
you to avoid frustration and have a great time.
This particular project is a cluster of Dogwood Blossoms.
This was part of an online course presented by Pro Carver Mary May.
I highly recommend that you take this course, because she carves the project along with
you, walking you through the whole process step by step.
She'll also provide you with a pattern to transfer so you don't have to draw it out
freehand.
She does charge for her courses, but it's worth every penny.
You'll find a link in the notes below the video.
I carved this into Basswood, which is an ideal material for a beginning carver.
It cuts like butter, the fine grain is less prone to tear out, and a lot more forgiving
when it comes to splits.
Butternut is another great wood for beginners.
Slightly harder, but it's still very easy to carve.
As I begin, I use a V-shaped gouge to outline the entire project.
This is the first step in lowering the background so that my design will begin to stand out.
As I work, you'll notice that I'm changing the direction of my cut frequently.
That's our first fundamental rule of relief carving.
Never cut into unsupported fibers.
Imagine that one of the petals in our dogwood blossom is made up of a bunch of straws, because
that's essentially what wood fibers are.
As you cut around curves, your gouge is going to be pushing against those wood fibers.
If you were to cut in this direction, for example, those fibers could have no support
at the tips, and they could bend and break off, leaving behind a jagged edge, or worse
yet, splitting off a portion of your petal altogether.
But if you cut in the opposite direction, each fiber is supported by one of the same
height or taller behind it, so your cut will be much cleaner.
As you get to the apex of curves, the fibers will change direction.
Here it's again unsupported, forcing you to reverse the direction of your cut.
So as you work around your design, keep in mind that you will have to frequently change
the direction of your cut so that all of the wood fibers are always supported.
As I mentioned, the purpose of this trench that I'm cutting around my design is to begin
lowering the background, but it also provides relief for the next step.
I'm using various gouges to make stop cuts right around the outer rim of my design.
As I do this, I'll have to keep the second fundamental rule of carving in mind.
My edge is a wedge.
Even though these stabbing cuts may appear to be very fine, the end of my gouge has a
bevel on one side, and that affects the fibers around it.
As I push it into the wood, the wedging action puts pressure on the fibers on both sides
of the cut.
This can naturally cause a split in the wood.
In addition, as you cut into the wood, the gouge itself will want to move in the opposite
direction of its own bevel, putting more pressure on the fibers behind it.
That's especially true if you're using a mallet to make a very aggressive cut.
If there's a delicate part of your design behind the gouge at that point, that pressure
can cause it to break off.
This risk can be minimized by cutting that trench around the design, because if there's
less wood on the bevel side of that downward cut, there will be less pressure on the chisel
to move in the opposite direction into your delicate flower petal.
But you still have to keep an eye on that wedging action, particularly if you're making
a cut parallel to the grain direction.
Each downward cut can spread the wood fibers, splitting the wood in both directions along
the edge of the gouge.
If a delicate part of your design, such as the point of one of your leaves, is in the
path of that split, you can lose it.
The solution is to think ahead.
If the grain runs to a point in your design like that, make a cut across the grain that
will fall in the path of the cut you wish to make with the grain.
That first cut will stop the second cut from splitting across your design.
When you're first starting out in wood carving, it can be difficult to think ahead and identify
potential problems as you work, particularly how the wood grain affects everything, but
with practice, this skill will become second nature.
As I finish making stop cuts all the way around my design, I begin digging out the background.
I'm not really worrying about getting the background smooth yet, I just want it lower
so that I can begin to define my image.
This step is actually a lot of fun, and it can be easy to get carried away.
So there's another fundamental rule to keep in mind.
Your gouge is not a lever.
Notice how the chips start to pile up around the edge of my flower petal.
It's natural for me to want to lever them out with my gouge and get them out of the
way, but the reason they aren't flicking away easily is because I've dug deeper into the
background than my downward stop cuts went.
So if I try to lever the chips up, I risk splitting away a big chunk of my flower petal.
Carving is about slicing wood away, not prying it up.
So be sure to fully cut all of your chips free so that they can be blown or brushed
away easily, not snapped off.
Now it's time to discuss another fundamental.
Visualize your design in 3D.
When you begin a project, it's nothing more than a two-dimensional drawing, but you must
visualize what it will look like in three dimensions as you work.
Some of our flower petals will be on top, others will be beneath those.
The leaves may be beneath one blossom, but on top of another one.
The stems are behind everything.
This whole carving will only be about 3 eighths of an inch deep at the most, but by lowering
the right parts in the right places, we can make it look very realistic.
That's what relief carving is all about.
We're stepping down the image one part at a time.
It's really just a matter of repeating the same steps again and again.
First you define the edges of the layer by making your downward stop cuts around it.
Then you lower the layer next to it.
Of course, not every layer is entirely below the one on top of it, but by sloping certain
parts downward where two layers overlap, it appears as if there is more depth there than
there actually is.
And that sloping effect can also be used to your advantage when shaping everything.
Take these flowers for example.
By sloping the petals downward toward the center, I'm giving the flower a cupped appearance,
which is actually how flowers are shaped.
But other parts, such as stems, must be entirely lowered, because we want them to look far
off in the background.
Creating a realistic image is all about knowing what to lower and where to lower it.
But don't worry.
That skill will come to you with practice.
After our layers are designed, it's time to begin refining the image.
This brings us to our next fundamental.
Do what comes naturally.
Even though we're working with a two-dimensional drawing, we want our image to look like the
real thing.
And nature is random.
Some petals will be flat, others may have a hump in the center or a curl on the tip.
One of the edges may be folded along the side.
No two should look exactly alike.
It may be difficult to imagine what looks natural as you move from petal to petal, so
it's a good idea to try to spend some time studying the real thing.
If you don't have access to a dogwood tree in springtime, or whatever you're carving,
find some high-quality photos on the internet.
As you look at them, focus on the shapes, the textures, and the flaws.
You'd be surprised how differently you see things in real life when you're trying to
duplicate them with wood and gouge.
My final and perhaps most important fundamental is this.
Be prepared to screw up.
Everybody does it.
When I was carving this design, twice I split off a folded portion of a petal.
It was devastating for a couple of seconds, but then I realized I could just change the
shape of the petal to cover the error and nobody would have any idea a mistake occurred.
Of course, you'll make fewer mistakes with practice, but even pros have their share of
boo-boos.
So be patient and keep at it.
Carving isn't as difficult as it looks.
You don't have to be Michelangelo, you just need patience and a willingness to learn.
Be sure to subscribe to Stumpy Knob's Woodworking Journal for more tips, tricks, and infotainment.
It's always free at StumpyKnobs.com.
See you there.
