ViperJet Maiden - Final Video

Flap Fliers
1 follower
Jun 17, 2026
Final video in the series of assembly and initial setup of the Black Horse ViperJet 2000mm turbine jet.
AI Generated·May contain errors
Hello everyone, Paul ZRC coming to you from my garage in Texas and this is our maiden
video of the Black Horse ViperJet 2000mm.
I loved flying this thing, I had three flights on it right now and just one word of caution
in general, get the CG right and in this video you will see how I have CG'd my model. Mine was
nose heavy, way too nose heavy and it actually affects roll rate and other aerobatic maneuvers,
so don't recommend that. There will be a table displayed here that will show you the rates I used
for all the control surfaces, it's a good way to start that, the model behaves really well.
I do have a flap elevator mix that you can see right now here, so when the flaps are up the
elevators are a little bit up to compensate to keep it flying level and then there's quite a bit
of down elevator on mid flaps and a little bit more on full flaps and it's about almost 20%,
so the plane tends to balloon when the flaps are down. Other than that it's great,
it was a lot of work as all Black Horse jets are, but it was worth the time, it's a really rewarding
jet, so enjoy the maiden videos. In the name of the Father and the Son and the Holy Spirit.
It's gonna come in, that's looking real good, nose level with the horizon,
ground center line, look at that, like a dream!
So for the CG, I initially made it with a plane nose heavy and it was too nose heavy,
I don't recommend that, what I recommend is to use this factory jig, it's actually
pretty well designed and right on spot and get your plane to be neutral, this one is still just
a tad nose heavy, but it's kind of neutral because now it's swinging back, so anyway,
a neutral CG using this rig is what I recommend, then the plane should fly great, I had to put some
weight in the tail, even nose heavy she flew great, but it wasn't aerobatic enough, so I
do recommend a neutral CG, I might go even further aft a little bit, but we'll see,
I'll fly it some more.
