Extreme Level Making of Durga Mata Murti from Scratch😱😱

Foodie Incarnate
84 followers
7 Video Views·Jun 11, 2026
Durga Mata Murti. Murti making. Durga maa murti making. Navratri. Durga pujo. Durga pujo festival.
For more, follow me on Facebook & Instagram: https://www.facebook.com/foodieincarnate?mibextid=ZbWKwL
https://instagram.com/foodie_incarnate?igshid=1rzh76us6w4vv
Our Daily Vlog Channel: @AmarAndNishaVlogs
AI Generated·May contain errors
As Navratri begins, the Durga Puja festival commences.
During this period, millions of idols of Goddess Durga are created every year across the entire country of India.
But do you know why Arpo creates statues symbolizing the faith of Sanatan Dharmis?
How are they made, and what is their importance?
If not, you'll watch this video all the way to the very end.
Because in this video, not only will we show you the complete making of these statues
We will also explain the significance behind these eyelashes.
So let's begin with the name Mata Rani
Mother Divine
So, for making the cow statue
First, let's see the two torches taken underwater
Then I took the gypsum cutter and opened it.
And they are taking out huge amounts of plaster by hand and pouring it into these water-filled containers.
So, the entire lump of gypsum has been extracted in one piece.
And then look after that
The second one, which is filled with water underneath
Even inside him, this gypsum is being extracted.
Mix these powders with gypsum and water
After filling it up to the top, look now—they've inserted their hand inside it.
And they are being thoroughly mixed together by shaking them well.
A perfectly consistent mixture will be made using water and gypsum.
And after that, the mold for the statue, carrying water
The mold made of rubber, which will be used to create the statue by repeatedly splashing water, will be soaked thoroughly.
And after that, he made the one who had created his own gypsum and water ball perform it.
And it is being placed inside this mold.
A fairly substantial amount of gypsum and water mixture has been poured into this mold.
Then, using the spatula, this mixture is being spread evenly into all the molds.
And note that this mold has not been completely filled with this mixture.
Rather, pour this mixture inside and fill it into the mold according to however many designs there are.
It is being spread among all of them.
After that, I saw a stick being raised, and this is some kind of grass-like thing.
Efforts are being made to separate it from the other by repeatedly striking it with a stick.
This stick will be beaten on it for a long time.
After that, they are lifted with hands and separated from each other, one by one, for a long time.
This work will continue for a long time, and once it separates from Pinelema, it will be distinct from the other.
Then it will be taken. I'm going to zip it.
And the water was round. Inside it, there was a deep, good one.
The ball is being placed on the base of the idol, not on the pedestal.
Yes, in the same way, the round man, Athleto
Moreover, this point deserves attention as well.
That dried-up, crumbly substance they're soaking in gypsum and applying into this mold
They are not even filling those molds anymore.
Rather, they are made only from a single outline of the mold.
It will take one hour to prepare it completely.
And finally, when a layer of it is formed over all the molds
After that, they saw here there are poles placed
And those sticks are also being stuck to this sticky substance.
After working hard for a total of 4-5 hours
The front part of the statue
He has already prepared himself from within.
Looking at it this way, they have already prepared the back part of the statue.
They have removed the cloth-like covering on top of it.
And now we're bringing this part as well.
A latch has been placed on top of the front part of the idol.
Now, what will be used to stick these two parts together?
So it will keep being taken.
And whichever edges it has, the two parts of the statue
They will be stuck together with glue applied on them, and they will remain stuck to each other.
After firmly sticking them, leave the paste undisturbed for about 2 hours.
To dry. Then look at this lying statue
It will be lifted, and the mold that it has will be pulled out.
So, this is the entire process of making these idols.
But why are these idols made in the Sanatan Dharma?
It has many reasons, but in simple words
And when worship is performed, it is not done for the idol.
The life force invoked through prayer and installed within the idol
It is done by them.
What are your thoughts on this? Please do share your opinion in the comments.
Make sure to follow my channel for more interesting and informative videos.
