How To Make A Dangling Bead Necklace Jewelry Making Tutorial

Handmade Jewelry
2 followers
150 Video Views·Jun 12, 2026
AI Generated·May contain errors
Hi, I'm Kitty and I'm Jennifer and we're the O'Neill Sisters. We're going to show you how to
make this gorgeous dangling bead necklace. What we love about this necklace is that when you wear it
there's a lot of movement from those dangles. We also love this ombre look, the way the colors go
from turquoise to blue to green and light green. We're going to show you all the tools that you
need to make the wrapped loops that hold on the dangles. We're going to tell you all about the
materials, the crystals, and the head pins. And then we're also going to show you how to put a
clasp onto chain. And if you have any questions or comments go ahead and post them and we'll respond.
So let's get started. Here are the tools and materials you need to make the dangling bead
necklace. For tools you need round nose pliers, chain nose pliers, and wire cutters. And then you
also need a tape measure and that's so you can measure your chain. Next you need chain and we've
chosen what's called an open loop chain for this project. Open loop means that the loops are
slightly oval and elongated and leaving enough room for wire work to go through the inside of
the loop. You don't want a really tight small chain for this project. We also need 21 head pins and
these head pins are silver plate and they have a little ball on the end because it's cute.
And then you also need a lobster clasp and one jump ring. Then you need the beads and we've chosen
20 faceted crystal rondels and we have them in four different colors. We've got turquoise,
periwinkle, this dark green, and light green. And the important thing here is that all of these beads
are the exact same size and shape. These rondels are six millimeters wide and that's the amount
of space that your bead will take up on the head pin. And they're eight millimeters in diameter.
When you're doing a project that has a lot of beads like this where you need different colors
of the same shape and size bead, it may be hard to find that kind of variety at just a craft store.
So you might have to go to like a bead shop. Yeah bead shops have a lot more variety and
a lot of colors and you can buy them individually, the beads individually, and not on big strands
which can save some money too. Lastly you need one bicone. That's about a three millimeter
crystal bicone and that's for a finishing touch that we'll show you at the end.
The first thing we need to do is measure and cut our chain and we're going to make a 16 inch
long necklace because we measured around our necks and that's the length we like.
You can measure a necklace that you already have and make it that length. We also are going to add
one extra inch to the length and the reason we're going to do that is when you make a necklace with
chain and you use a lobster clasp as your clasp you can make it adjustable. So we can make it so
we can clasp it at 16 or if we give extra room in the chain we could clasp it at 17 and make it a
little bit longer. That just gives us some adjustment. Then we just cut our chain here.
And when it comes to cutting chain there's really no magic to it and no mystery. You just
slice right through one of the loops just like that. You want to hold on to that end so it doesn't
fly off. That's a good idea so you don't get any injuries while you're crafting here.
So you can see that's a broken link that I just cut out of the chain and now we have our 17 inch
long piece of chain and we need to find the center of that. The center is important when it comes to
this necklace because our beads are going to line up on either side of the center. So all I did was
fold the chain in half and pinch where the center is. You could also take your tape measure and
measure half of 17 and half of 17 to find your center but it's easier just to fold it in half.
And then I'm going to mark where the center was with a head pin. That's just temporary but just
so we can build out where our beads go. And now we're going to lay out our beads and to do that
we're just going to dump out our little beads here in the order that they're going to go in on the
chain. And we decided that we like them going in sort of this color merge or ombre look. So we're
going to go from this light green to the darker green to periwinkle and then to turquoise. And we
want to start lining up our beads at the center where this head pin is. We're going to put a bead
on either side of the center and the where they line up is important with these loops. You want
to skip a loop in between each of our beads. So the chain has links that will lay flat against
your skin and then links joining those links that will be perpendicular. You can see that we want to
put the bead on a flat link each time, flat link, flat link, and in between we have a perpendicular
link. And that means when you do that it'll make sure that the beads hang the same way
all the way across the necklace and some don't stick out or poke out the wrong side. You don't
want one like flipping up over the top of the chain. Exactly. It happens if you just sort of do
it willy-nilly without a plan that can happen. So we're just going to keep lining these up and the
size of these beads ended up sort of matching the size of the links of the of the chain spacing. So
for this necklace you're just going to skip one link in between each of these beads. If your beads
were bigger you might need to skip more than one link and it's important that you skip an odd number.
And now we're ready to make our dangling beads that go on our chain. To do that we're going to
take a head pin and slide our first bead onto the head pin all the way down to the end and then I'm
going to hold on to the bead so that it's firmly pressed against that ball. And I'm going to make
what's called a wrapped loop. To do that I'm going to use my round nose pliers and I'm going to grasp
the wire of the head pin right above the bead with the very end of my round nose pliers and I'm
going to make a 90 degree bend in my wire by pulling the wire toward me. Next I'm going to
reposition the pliers to the top part of that wire and where I do this next step will indicate or
will dictate how big my loops are in the necklace and it'll be the loop that's holding this dangle
on. So I'm going to show you a little trick that we do. We're going to take a sharpie and we're
going to make a mark on our round nose pliers where we want to make our wraps. So she's going
to make a mark so that all the wrapped loops on the necklace are always the same size because if
she made some of the loops at the little tiny end of the pliers and she made some might be at the fat
end of the pliers then loops are going to be all different sizes. And this way she's going to make
a mark on both sides of both the jaws of the pliers and then all her loops are going to be
the same size. It makes it look just a little more finished a little more professional if all of your
loops are the exact same size so it's a good thing to do. And don't worry about marking up your pliers
like this because you can remove the marks with a nail polish remover but they're also just going
to rub off anyway. I was just about to reposition my pliers grabbing onto the wire that's 90 degrees
right at the bend at that point where I'm going to make my first loop. So I'm going to pull the
wire around the top jaw of my pliers all almost all the way. You'll see I can't go all the way.
She's letting the shape of the pliers create the loop rather she's not bending the pliers or
anything to make something round. Right I'm not you're it seems like you would go like this or
something with the pliers really you're holding them still the whole time. Now I'm going to
reposition my pliers to the bottom jaw and pull the wire all the way around to finish making my
loop. You see I've got a complete loop there but before we wrap the loop we need to feed it onto
the chain. Because if you finished it if you went ahead and wrapped it around it would be a closed
loop and then you can't get it onto the chain. And you'll do that you'll make that mistake. You'll be
like on a roll you'll be just wire wrapping and then you'll close it up and if you do that you
just cut it with your wire cutters throw away that head pin and just do it again. Just start
over it's no big deal. Now here's where it helps that we marked the center of our chain because we
want to start this color of our necklace one link over in the chain. So I'm going to slide my wire of
my head pin onto that first link that's to the right of the center link. And once she's grabbed
the chain with the head pin she doesn't need to keep track of where the center is anymore.
Right. Because she knows the center is the link just one over from where she's working.
Exactly. So now I'm going to wrap this loop. To do that I'm going to hold I'm going to move the
chain out of the way here. I'm going to use my chain nose pliers for that. I'm going to grab
across the loop to hold it firmly and so it keeps its shape. I'm going to grab the end of the head
pin wire and I'm going to pull it twice around the little neck that I created. Perfect. Like that.
And now it's closed and it'll stay on your chain now. And I'm going to use my wire cutters or
flush cutters to cut this little end. And I want to get it as close to the neck of the wire as
possible. So I'm going to use the flush side of the wire cutters. You can see one side is angled
and one side is flush. If you cut it with the angled side towards your project you would wind
up with a pointy piece of wire sticking out and you don't want that. So use the flat side of the
flush cutters towards your project. And then let's see here I'm holding on to the end firmly.
I don't have any flying pieces. That's good. That off to the side. And then if if you do end up with a
little bit of a poking out end you can always use your chain nose pliers to just sort of push the
end down. And now you can see we've got our first bead on our chain. And I'm going to go ahead and
lay that out again. And you're going to want to do this in between every dangling bead component.
You want to lay the chain back out so that you know which lengths are facing up and which are,
you know, the the flat ones and which are the perpendicular ones. You're going to need to put
each dangling component on the same side that is the hanging down side of the chain. See here
it's on the bottom of that link not the top of that link. When you pull the chain firmly like
that it sort of lays the links back out so you can see. You kind of untwist it. Yeah. So my next
one's going to go on this side of that link. So you just take another head pin, slide on the same
color bead. We'll do five of these in a row. And then she's going to do the same thing again with
the chain nose pliers or with the round nose pliers. She's going to make a little neck.
Grab the wire like that. 90 degrees. I'm moving up to where we made our mark.
She's letting the tool do all the work. It's like a mandrel. I'm going to reposition to the bottom
jaw of my pliers at the same mark and pull the wire around to make my loop like that. And now
I want to carefully feed this end into that link. This is the trickiest part is making sure you get
in the proper link on the proper side of the link. So. And she can she can double check her work by
holding the chain up and making sure that they both hang in the same place.
So I'm going to do that just to be sure. Oh that's great. It looks right and I'm going to go ahead
and wrap my loop. So I'm going to grab my chain nose pliers for that. I'm actually going to switch
hands here. Grab across my loop. Pull the wire around the neck twice. That's her wrapped part
of her wrapped loop. And I'm going to use my wire cutters or flush cutters. Don't cut the chain.
Yes it's really be careful not to cut the chain. Hold on to the end and we're going to hold it up
and make sure that that looks right. So far so good. That's great. And we're going to stretch
it back out. There you go. And we're going to get ready to do our next bead. So she's just going to
do the same thing again to put on the third bead. This chain, we got this chain at a craft store and
it came on a card, like wrapped around a card. And it was just about as much as we needed. But it also
comes, you can buy it on a spool if you wanted a huge amount of chain. You can buy it in bulk like
that. That's really nice because you can get a lot for for not very much money. And if you're doing
like a lot of gifts, if you're making a lot of presents for holidays or something, that'd be a
good way to buy the chain if it doesn't need to be special. So now that we've got all of that dark
green on our chain, we're just going to continue on adding those beads to the right, making sure
that we skip every other link in the chain. And then we'll start with the next color, which is
this periwinkle. Just to the left of the center and continue beading with our wrapped loops all
the way to the end until we're done with the turquoise. And now that we're done with all our
dangles, we just need to put on a clasp. To do that, we are going to attach this lobster clasp
using a jump ring. So we're going to take the jump ring and we're going to open it using both
pliers that we have, our chain nose and our round nose pliers. I'm going to line up the opening of
this jump ring. You can see that there's a little cut in the jump ring there. I'm going to put that
in between the chain nose and round nose pliers, grasping that jump ring on either side. And then
I'm going to rotate, opening this jump ring like you'd open a door. And that's to keep it from
losing its round shape. And I'm going to feed that onto the very end link in our chain. And I'm going
to feed on the lobster clasp. Then I'm going to close this jump ring the same way we opened it,
with two pliers, holding the jump ring on either side of the opening and then rotating it like I'm
closing a door. And then I'm going to just flatten out that little where it's closing
with the chain nose pliers. And now that end is done. And we don't need to put a jump ring on the
other end of this chain because the lobster clasp can hook through any one of these links. But it
doesn't really look finished, so we're going to show you a little trick to make your jewelry look
finished. To do that, we're going to add a little beaded dangle similar to these beaded dangles
on the very end of our chain. So I'm going to take the last of our head pins and I'm going to feed on
our three millimeter bicone. If I can get it through the little hole there. Sometimes it
helps to have readers if you can't see very well. And then I'm going to make another wrapped loop,
just like the wrapped loops that we made for our beaded dangles here. So I'm going to grab the
wire at the end, bend it, move up to our mark. Which are starting to fade. Yes they are. And I'm
going to make, almost finish my loop, and then I'm going to feed it on to my last link in my chain.
You can do this if you're, when you make a bracelet and then that little dangle will hang
off the end. It looks super cute. Makes it look really finished. So I'm going to use my chain nose
pliers to grab, actually let me do it this way, grab my loop and I'm going to wrap the wire twice.
You'll see jewelry in stores, jewelry stores, especially handmade jewelry, they often have this
little finishing touch. And then I'm going to cut the wire with my flush cutters and not cut the
chain for myself. And then I'm going to put the lobster clasp, attach it to my chain at the end.
And you can see that we've got a little finished. And now here's our finished necklace. And those
crystals really sparkle. It's amazing that by learning just one simple technique you can
create such a cool necklace. And now you can practice your wrapped loops and make your own
dangling bead necklace.
