░▒▓█ 𝐃𝐈𝐄𝐒𝐄𝐋 𝐄𝐍𝐆𝐈𝐍𝐄 𝐂𝐎𝐌𝐏𝐑𝐄𝐒𝐒𝐈𝐎𝐍 𝐁𝐑𝐀𝐊𝐄𝐒 (𝐉𝐚𝐤𝐞 𝐁𝐫𝐚𝐤𝐞𝐬) 𝐄𝐗𝐏𝐋𝐀𝐈𝐍𝐄𝐃! █▓▒░

Charley’s Garage
78 followers
A brief introduction to Diesel Engine Compression Brakes (Jake Brakes). Why trucks need them, how they work and what they do for the truck.
#engine #diesel #brakes #jakebrake #COMPRESSIONBRAKE
A frequently asked question that I get a lot
when people find out that I'm a diesel tech
is how do engine brakes work
and why can't they use them in residential areas?
So I've decided to make a video to try to explain this
in a way that people who aren't diesel mechanics
can understand it, kind of dumb it down, if you will.
Just that the random people
that might want to watch this video
and find out how do they work and what do they do
can understand it.
So let's start with what is an engine brake?
The most popular version of an engine brake
is a compression brake.
And what a compression brake does
is it reverses the normal power flow of an engine.
Normally, when an engine is creating power,
it sends that power through the transmission,
through the driveline, eventually to the wheel ends,
creating the force that drives you down the road.
When an engine is in braking mode,
that flow path is reversed.
So instead of going from engine to wheels,
now the wheels are turning the driveshaft,
turning the transmission and trying to rotate the engine.
The engine, especially a diesel,
is compressing a lot of air.
It takes a lot of effort to compress that air.
If you don't get a power stroke to pay it off at the end,
you are basically gonna slow the entire truck down
by trying to rotate the engine.
So to make it simple,
let's look at the little flow path that I drew for us.
So a normal flow path, right,
is the engine creates torque,
delivers that torque to the transmission.
It travels through the driveshaft and differential
and ends up on the wheel ends
and gives you your forward or reverse momentum.
When brakes are selected on a tractor trailer,
that reverses.
So now the wheels are spinning
because of the vehicle's own weight and momentum.
It's the spinning wheels rotate the driveshaft,
which rotates the transmission
and then tries to rotate the engine.
So normal engine operation on a four stroke,
you have your intake, compression, power and exhaust strokes.
What normally happens during normal engine operation
is that the exhaust stroke
is when you want your exhaust valve to open
during normal operation.
But when engine braking is applied,
we want the exhaust valve to open
during the compression stroke.
Now the camshaft is not designed to do this.
In order for us to get the exhaust valves to open
when they shouldn't be opening,
we have to use a special tool
or a special piece of equipment.
There are a large variety
of different types of compression brakes out there,
but one of the most popular is called the Jake brake.
And if you look, it's upside down,
but you can see Jake brake right there.
Jake brake is so popular
that a lot of times we just commonly refer
to all engine compression brakes as Jake brakes.
So when you hear a truck making a loud noise
coming down the road, you go,
oh, he's got his Jake's on.
Doesn't necessarily mean
he has Jacob's brake manufacturing brakes,
but it's just a common colloquialism.
So if we take a look at this guy,
you can see that it has the word front right here,
which means that on an inline six cylinder diesel engine,
like the one this came off of, a Detroit series 60,
this one is going to control engine braking
or compression braking for the front three cylinders.
On the engine itself,
there's another one that says rear on it
that controls braking for the rear three cylinders.
This whole setup is gonna sit right over the top
of your rocker arms and your injectors and everything else,
and is going to use an electrical solenoid
to allow oil flow to get into this housing.
And then it's going to use a master piston,
which are these guys right here,
to increase the oil pressure inside the housing.
That increased oil pressure
is going to cause the slave pistons,
which are these guys right here,
to push down on the exhaust valve.
And it's all gonna be time to happen
when the engine is nearing top dead center
of the compression stroke.
So if you think about it,
it has all that effort going into it
to absorb thousands of PSI of compressed air,
only to pop open the exhaust valve
and release that compressed air
at the top of the compression stroke.
Hence, no power stroke.
So the way it works is oil flow
from the engine's lubrication system
will come into the housing,
and it will get stopped
by this normally closed solenoid right here.
The ECM controls the solenoid,
so when the operator selects engine braking,
when the brakes apply,
the ECM will open this solenoid,
allowing oil flow to fill up the housing.
One of the rocker arms
will start to rise to,
and it'll push this master piston up into the housing.
When it does that,
it tries to push the oil back out
the direction it came from,
but inside of this housing,
there is a check valve
that prevents that oil from flowing back
the direction it came from.
Since it has nowhere to go,
the master piston pushing the fluid
tries to compress fluid,
and since you can't compress the fluid,
PSI gets really high.
That increased pressure
then forces these slave pistons
to push down against the exhaust rocker arm
or the exhaust valve bridge,
depending on the type,
pushing the valve open.
And all of this is specifically timed
to allow it to do it
at exactly top dead center of the compression stroke.
Well, maybe not exactly,
but real close.
So, these things are,
the reason you see all those signs
that say do not operate engine brakes
in residential areas
is because you're taking thousands of PSI of air pressure
and releasing it all at once
through the exhaust system,
and it's really loud.
So, of course,
people who live close to the areas where trucks go by
don't wanna hear that all night long,
so that's why they have the signs posted.
Troubleshooting these things
if the brakes on a truck aren't working
is fairly easy.
The manufacturers decided to put a button
on the top of these solenoids,
and most of your different brakes,
even if they're not Jacobs,
use a similar type of solenoid.
Okay, I showed you guys the one that was on the table,
the Jake brake housing.
This is where it mounts on this Detroit Series 60 engine.
It would go right here above all these valves.
Of course, you would have your rockers,
these guys are all installed.
You'd have all that on there.
So we took off a lot of stuff here,
including the rocker shaft and stuff
for teaching people how to work on these.
But if we come over here,
you'll see that you got the one housing
that's still on here.
So the one I showed you in the classroom
was the front housing for the first three cylinders.
This is the Jake brake housing for the rear three cylinders.
Each cylinder on this engine has three rocker arms.
You have the injector rocker arm in the middle,
and then the intake and exhaust rocker arms on the outside.
So that means that the cam lobe that's in the middle
for this cylinder is the one that controls the injector.
If you look right above the injector rocker arm,
you see the slave piston right here.
So whenever that injector is being pushed up
by the cam lobe to actuate the injector,
this rocker arm will push up on the slave piston,
pushing it into the Jake brake housing.
As long as this solenoid is allowing oil flow through it,
then that pressure from that master piston
pushing the oil in the housing
will cause the slave pistons up here on the other side
to come down.
And those slave pistons right here
will push on the exhaust rocker,
causing the exhaust valve to open
at TDC at the compression stroke,
thereby releasing all that compressed air,
eliminating the power stroke,
and slowing the whole truck down.
On the solenoid, there's a button right here at the top.
If you push this button while the engine's running,
you're bypassing the electrical part of the system
and allowing the brakes to work with the hydraulics
that they normally would.
So if the driver said they weren't working,
I push this button down and it does work,
I know I have an electrical issue.
If it still doesn't work,
then I'm looking for things like bad O-ring seals,
cracked housings, improper slave piston adjustment.
You have to adjust the lash between the slave pistons
and the exhaust rockers to make sure
that they open at the right time and the right amount.
If you misadjust these,
you either have the valve hanging open when it shouldn't be,
or you don't move the slave piston enough
to open the exhaust valve at all.
So that's just a little intro into engine brakes.
I hope you guys enjoyed it.
If there are any other questions that you guys have
about anything diesel related,
please post them in the comments
and I'll be glad to do a tutorial video on those as well.
Also, please remember to like, subscribe, and comment.
I appreciate everybody who watches these.
Have a great day.
Just a quick editorial correction here.
During the video, I kept referring
to these as slave pistons for some reason,
because I just wasn't thinking about it.
These are the master pistons.
So the thing that the rocker arm pushes up on
into the housing is the master piston.
And the guys on the other side
that push down on the exhaust valves,
those are your slave pistons.
So just a mental error on my part,
misdescribing that for you guys.
I didn't want to re-record the whole thing,
so I'm just pointing it out now.
So master piston controls the slave piston.
Just keep that in mind.
All right, guys, later.
