Don't Start Diesel Work Without This Tool

Charley’s Garage
78 followers
Here is a link to a reasonably priced DMM that is cheap for a begginer but can still do almost everything you will need it for. If you buy one I will get a commission so thanks in advance!
https://amzn.to/3Pr1EK5
The second in series of videos that lays out the most important tools an new technician in the automotive or diesel field will need to be successful, In the first video we talked about basic hand tools and an affordable box. In this one we go over a DMM (digital multimeter) and why it is so important and price range.
#Tools #diesel #automotive #technician
AI Generated·May contain errors
Hello everyone and welcome back to Tools for Tech's Volume 2.
So in the first volume we talked about the necessity for getting a good basic hand tool
kit and an affordable toolbox to put that kit in.
So for Volume 2, after you get a good toolbox, after you get some basic hand tools, the most
important tool I think that a modern technician can have in their toolbox is this guy right
here.
We call it a DMM, but that stands for digital multimeter.
What the digital multimeter or DMM can do for us is a lot of things.
It is a much more valuable tool than just a basic test light.
With a basic test light, you can test if voltage is present, you can test if you have a good
ground source, but that's about it.
With today's computerized trucks and cars, you need to be able to measure everything
from milliamps and sensors and continuity and capacitor strength and you name it, right?
And the tool that can do all of this stuff for you is the multimeter.
So the one I'm holding up right here is a Fluke meter and it's the one that we give
the students to use at UTI and it comes, they get issued one when they enroll here.
This is made by Fluke, so you can see you got the actual meter, you got a protective
case that surrounds it, that helps protect it.
And just a quick Google search a few days ago, I was looking at good DMMs, well not
good DMMs, but DMMs in general.
The cheapest ones I was seeing was $50 to $85 and the most expensive one that immediately
popped up was around $1,200.
Do not go out and spend $1,200 on your very first DMM.
You don't need to spend that much.
I was asking the Snap-on guy what prices were for DMMs and he told me, let me borrow this
one so that I could show you guys what you can get as a student with a student discount
for about $280.
So I am not being paid by Snap-on, I'm not their spokesperson, I'm just saying that
a good multimeter that you would want in your box is going to cost you somewhere between
$200 and $300 and this is just a good example of one.
So if we open this box up, we can see that it comes with a carrying case, comes with
the leads that you would use, comes with the DMM itself, and then probably most importantly
for new guys that haven't got a lot of experience using them, it comes with this guy.
The manual on how to use it, right?
So if you look at this DMM, it's got the dial gauge right here where you can change it from
volts, AC, DC, ohms of resistance, diode check, you name it, it's got the capability.
And then up here at the top of it is where these leads right here would get plugged in.
Now when you're first starting out, it can be a little overwhelming and confusing about
which leads to put, where to put the leads up here, what dial position to be in when
you want to use it.
The best thing I can tell you is that if you buy a quality DMM, it is going to come with
one of these, right?
So if we look inside of here, it tells you based on what you're wanting to do, it shows
you which pins to hook up to, what the dial position is, and the one I'm pointing at,
I know you guys can't see it, but the one I'm pointing at is for measuring alternating
current voltage, right?
So if you were trying to measure AC voltage at a point, it tells you right here exactly
where to do it and how to get it done.
And this book also tells you how to direct millivolts, direct current, millivolts alternating
current, how to measure diodes, how to measure continuity, how to measure ohms of resistance.
It walks you through how to do all of these things.
The better prepared you are to use one of these, the more effective you are going to
be in the field with modern cars and trucks.
They are complicated electrical computers now on wheels.
So understanding electrical, understanding how to use this tool, which is my beyond the
basic tools, beyond the toolbox, this should be a good investment.
Don't go cheap.
If you buy a $50 one, you're going to get what you pay for.
Don't go super expensive and buy a $1,200 one because you don't need anything that's
going to be different from this $280 model right here, right?
So whether you're going with Fluke, whether you go with Snap-on, $200 to $300 should buy
you a reasonable, sturdy, quality multimeter to use.
Please make this one of your first purchases.
Make it a good one, and then don't just have it sitting in your box because you're scared
to use it.
Get in the manual, learn how to use it, practice with it.
It'll make you so much faster at diagnostics.
It'll make you faster at electrical repairs, and it might even make you the go-to guy in
your shop on those types of issues, which could make you a lot of money.
So knowing how to properly use one of these, $280, it's going to pay for itself fairly
quickly.
So that's Tool for Beginners for today, volume two, digital multimeter.
Thank you.
