In this video, we put diesel air compressors to the test to determine if they are worth the investment for industrial diesel applications, including fleet maintenance and truck repair. We examine the performance of diesel air compressors from top manufacturers like Cummins and International, and assess their impact on brake systems, including the risk of oil in air tanks and air leaks. Our testing also evaluates the effectiveness of these compressors in supplying a reliable air pressure to heavy duty trucks, and how they interact with critical systems like the DPF and bendix air brakes. Whether you're a diesel mechanic or a fleet manager, this video will provide valuable insights into the benefits and drawbacks of diesel air compressors, helping you make informed decisions about your air supply and compressed air needs. From the perspective of truck repair and maintenance, we also discuss the importance of a well-functioning air compressor in preventing costly downtime and ensuring the overall efficiency of your vehicles.
AI Generated·May contain errors
Today's video is going to be about air compressors. I know we usually talk about engines,
but these are engine adjacent. They are usually driven by the engine, either via a belt or in
the case of this one right here, off of the engine's gear train. You can see the gear right
there. This is a Bendix one that came off of an international DT-466, but you can also find
engine manufacturers that supply their own compressors. So when we're looking at this guy
right here, first we got to understand that the air compressor is what's going to deliver air
pressure to the air tanks on a truck, right? So you have air brakes. A lot of people know
about air brakes, but you also have air suspension. You have air cabs that have suspension airbags on
them. You have fifth wheels that are air operated, seats that are air operated. So lots of different
air operated components rely on this guy making air pressure. So a couple of things. So this
specific air compressor would be a two cylinder, right? So think of an air compressor as an engine
that has no power stroke. This air compressor has a crankshaft that runs off of this gear,
runs through here. There's two connecting rods attached to two pistons. Those pistons travel
up and down inside the cylinder bores and they pull in air through here. The air comes in, it
compresses that air, and then that air gets sent out through a discharge line to the air tanks.
You can always kind of tell which of the two is the inlet and the outlet because the outlet's
under pressure. And so that's going to have the threaded fitting, whereas the inlet isn't under
pressure. So it's usually just going to be a hose with a hose clamp on it. So when this thing is
building air pressure, sending that air pressure to the tank, and then you're typically going to
have a governor that is going to determine how much air pressure. So this thing is receiving a
feed signal from the air tank, letting it know, hey, or sometimes from the air dryer itself,
letting it know, hey, I got this much pressure. We need to start unloading this compressor and
not letting it send air. And then once air pressure drops to a certain point, this thing is spring
loaded. And once the air pressure drops to a certain point, you reach what's called cut-in
pressure. Cut-in pressure is when the compressor starts sending air back to the tanks again.
So typically on a big truck, you're looking at around 120 psi for cutout and around 90 or so,
give or take a little bit for cut-in pressure. So when we're looking at this governor, I've seen
many, many air compressors over the year replaced because of air charge issues when it wasn't
actually the air compressor, it was the much less expensive governor here that was the problem.
So we always want to diagnose the governor before we condemn an air compressor. So if we have air
pressure issues, one of the things is that, excuse me, the unloading valve at the air dryer
is controlled by this governor as well. So every time you reach cutout pressure,
that's when you hear that pshh that the trucks make when they're releasing that air out of the
dryer. So if you have constant purging, like every couple of minutes you hear pshh, pshh, pshh,
that could be an indication that you have an air leak that's making this governor here cycle from
cut-in to cut-out over and over again because of that leak. So that's one of the things you
might run into with the leaks and governors and air dryers. But back to the compressor itself,
most of the time these compressors are pretty reliable. Every once in a while they'll wear out
and you have to replace them. And one of the best ways to know if an air compressor gets worn out
is by how much oil is passing from the crankcase in here, getting past the pistons, and then coming
out and going to the air tank. And one of the things that Bendix has developed is something
called a basic test, where we know that when we compress the air it's going to get hot,
which means this compressor runs at a pretty hot temperature. And when that happens it causes the
oil in this crankcase down here to vaporize and some of that oil vapor goes past the pistons and
the cylinder walls and gets up into this area. One of the things that is normal for an air compressor
is that they're not normally going to look this clean up at the top, right? Normally there's going
to be oil residue around here and that's okay because these things will seep oil vapors through
all these little threads and stuff and you're allowed to have some. Bendix actually says that
as long as the oil isn't seeping down here to this data plate then it's okay don't replace
the compressor. But what we're concerned about is how much oil is passing through this system
coming out of this discharge and ending up in the tank. So on the basic test that Bendix devised
you're going to tell the driver of a truck not to drain his air tanks for about 30 days.
After 30 days you're going to drain the air tank and measure in a cup how much oil you collected
when you drain that tank. And Bendix supplies a chart that says you know for high air use trucks
that you can't have more than this much oil. For low air use trucks you shouldn't have more than
this much oil. And when you exceed that amount of oil that's a good indicator of wear in the
compressor letting you know that it's time to change it out. One of the things to keep in mind
that your compressor may not be worn too bad it may be an issue where you're getting the oil
hotter than normal. So if your engine is running hot or overheating that could cause excessive
oil getting through here as well. Plus any restriction of air coming into the inlet
like a restricted air filter a pinched line is going to cause the heat to build up inside this
as well. So you always want to eliminate overheating of the engine and restrictions
on the inlet line as suspects before you condemn the compressor over a basic test.
So I hope this helped clear up some of the things with air compressors what they're for
how they operate what the governor does. If you have any questions about air compressors
please put them in the comments and I will get back to you. Thank you for watching. Bye.