Understanding Diesel Oil Coolers: Keep Your Engine Alive

Charley’s Garage
78 followers
A very quick overview and explanation of Diesel Oil Coolers! Why we need them, where they are located, how they can be damaged and why and how we can test them.
Thanks for watching this video, Merchandise that can support this channel and our animal rescue and adoption efforts can be found here:
https://vt.tiktok.com/ZT2rsAxse/?page=TikTokShop
#diesel #oil #cooler #dieseltechs #learnaboutit
Hi everybody, welcome back to Charlie's Garage.
Today's topic that we're gonna talk about
is an important part of a diesel engine
because of the compression ignition,
the heat that's generated in a diesel
can get pretty extreme
and that heat can have a negative impact on oil.
When oil gets hot, it will change in viscosity,
it will have issues losing its additive package
and a lot of other issues that we don't wanna deal with
when it comes to the oil getting too hot.
So what we're gonna talk about today are oil coolers.
Now, oil coolers are put onto diesel engines
so that the oil can get cooled down
by transferring its heat to coolant.
So how does that work?
So this one right here,
this is off of a international DT466
and this is gonna be located
right by the oil filter module
and it's mounted onto the engine just like this.
So if you looked at the side of the engine,
you would see this stuff sticking out of it, right?
So what this does is if you look at the backside of this,
you see four holes, right?
On these four holes,
one of these is a passage for oil to go in and out
and the other one is for coolant to go in and out.
So this would be an external type oil cooler
that's got passages of oil and coolant
that run right next to each other
and the heat's transferred from the oil to the coolant
through that way, right?
I don't have one handy to show you guys,
but some of the Cummins that we have in our workshop here
have only two holes on them
because the only thing traveling through the oil cooler
is oil and the whole plate assembly is inside the block
and all of this is surrounded by coolant
getting the heat transferred directly into the coolant cavity
So with the oil coolers,
one of the things we talk about with these
is the fact that their main purpose,
like I said at the beginning of the video,
is to extend the life of the oil
and help them keep it cooler
so it doesn't break down as much.
So that's the purpose, right?
The things that can go wrong with an oil cooler
primarily is it is exposed to a high heat load
and there can be potential for it to stress and crack
and if you have any kind of cracks in an oil cooler,
you can imagine if you have oil and coolant
running right next to each other,
one thing you don't wanna have happen in your engine
is have oil floating around in your coolant
or especially have a bunch of coolant
diluting the oil in your oil pan.
So one of the things you would do
is let's say you were just doing your daily check
on your engine and you pulled the dipstick out
and noticed that it looked like chocolate milk
because there's a bunch of water and coolant
getting mixed in with that oil,
this would be one of the components
that you would suspect would be responsible for that.
You've got the normal suspects that you would expect
from cross-contamination of oil and coolant
such as the head gasket, the cracked head.
On sleeved engines, it could be a problem with an O-ring
causing the coolant to leak through the O-ring
to the oil pan.
Air compressors have been known to be the cause
of some of that.
But on diesel engines, this is a common culprit for that.
Especially if you don't maintain your system well enough
and you don't maintain the cooling system additives
and you have cavitation issues,
you have corrosion, acidity,
pH levels in the coolant can eat these things.
Bunch of different ways that can cause it to fail.
But so if you did suspect that this cooler
was the reason for it,
then somewhere in your troubleshooting methodology,
you'll come across taking this thing off.
And what they do is they make plates.
Different OEMs have different plates
that you can buy from a Cummins or from International
that are designed for their oil coolers.
You can also go to a third party like OTC
and order oil cooler test plates
that are kind of interchangeable and adaptable,
but not as specific to the oil.
But anyway, that plate would mount here
and bolt onto this guy.
And usually what the service manual would tell you to do
is to put a certain amount of air pressure into that plate.
So you do shop air, fill this thing up with air
and then put it into a bucket of water
and look for bubbles that would indicate to you
where it might be leaking from.
And if you saw those bubbles,
then yay, you just found the source
of that cross-contamination,
time for a new oil cooler, right?
So this is just basic intro.
There's a lot more information about oil coolers.
There's different types of oil coolers.
I think the last thing I would leave you with
is that the most likely place
you're gonna find an oil cooler
is gonna be on the right side of the engine
around the oil filter module,
usually down below the turbo
and the exhaust manifold and stuff, right?
And some engines like a Cummins ISX,
you're gonna find two of these types of oil coolers,
only skinnier and longer, right?
So if you have any questions about oil coolers
that you'd like more information
or anything that you're wondering about,
please put it in the comments.
I'm very good at answering comments as soon as possible.
If you have a smart ass comment about oil coolers,
please, I don't wanna hear it, all right?
So just, if it's reasonable, ask a question,
I'll answer it.
Thank you for watching.
Please like and subscribe.
I appreciate all the support I get from you guys
and check out the TikTok shop
that's gonna be in the comments
in the about section for merchandise.
Thank you, have a good day.
