Understanding Diesel EGR: How It Works & Why It Fails

Charley’s Garage
78 followers
Become a channel member and get great perks, Also check out our store for great merchandise like mugs, backpacks,T-Shirts, bumper stickers and more!
https://charleysgarage.myshopify.com
We look at the heavy duty Cummins ISX and Detroit’s DD15 and spotlight the differences in their EGR systems versus the Medium duty we looked at in the Basics Of EGR video.
#diesel #egr
##emissions
#Detroit
#cummins
#ISX
#DD15
#heavyduty
AI Generated·May contain errors
All right so yesterday I posted a video about the basics or understanding diesel EGR
and it was pretty popular so I wanted to give you guys a few looks at some other different
types of EGRs on other engines. This engine right here that we're looking at is a Cummins ISX CMA
71 engine. It's the older version of the ISX before they went to a high pressure common rail
fuel system and you can see on this one that this EGR cooler of course is on the left or right side
the engine right underneath the exhaust manifold. The cooler is getting its exhaust gas from the
manifold just like on the engine I showed you guys in the other video but in this case instead
of having a crossover tube going up toward the front of the engine this one has a crossover
tube that comes around the back side of the engine and if we follow this tube from the cooler around
we can see that it goes through here and if you follow it it comes up
to right here and what we don't see is that the EGR valve is mounted it's kind of hard to see
but the crossover tube comes up comes right here comes up into here and then right in here is the
venturi that allows the exhaust gas to mix with the incoming fresh air from the turbo
so it's not much different than the ones on these little engines over here that I showed you in the
other EGR video it just wraps around the back instead of the front. Other than that it's pretty
similar if you come over here we'll show you guys what it looks like on the Detroit's they're a
little bit unique so this right here is a DD platform engine and the EGR valve is actually
right here before the cooler so if you look we have this big box this is actually the EGR valve
controller and we have on the controller there's this arm that attaches to a butterfly valve right
here so this valve will open and close on this Detroit DD15 and allow the air the exhaust to
travel through the cooler up here and then once you get to the intake side it's just straight
piped into the intake so where on some of the other engines we've looked at the EGR valve is
on the intake side of the engine after the cooler this one the EGR valve is before the cooler on the
exhaust side of the engine and my guys that go over to Freightliner and take the finish first
program and get their Detroit certifications tell me that there's a whole CBT about the size of this
rod apparently it's pretty complicated little guy that on different engine applications different
sized rods and understanding how to install them and what positions to be in I guess there's a lot
to it but this is a DD and the one I showed you before was the Cummins ISX so there's a lot of
different formations of where the valves are where the coolers are but ultimately they all still
share that same goal of reducing combustion temperatures and reducing the amount of NOx
that is produced in the exhaust stream because of those combustion temps so again I hope you guys
like this if you have any questions about EGR or anything else diesel related please ask in the
comments please like and subscribe all the likes and the subscribes help me get this info out to
more people so more people can learn about the wonderful world of diesel engines thank you
