A quick overview of the running engines we have at UTI’s Diesel Fuel Systems course and what goes on with instructors when the students are gone. Preventive maintenance and repairs are ongoing even in a training environment.
Please like, subscribe, give us a super thanks sticker or become a channel member. And check out our cool store! https://charleysgarage.myshopify.com/
An instructor provides a behind-the-scenes look at the maintenance and preparation required to keep a diesel fuel systems lab operational. The video highlights various engine projects, from battery testing and plumbing installations to troubleshooting electronic control modules, emphasizing how these maintenance tasks serve as practical learning opportunities for students.
Hello everybody. I wanted to give you a rundown of kind of what we're working on
in the diesel fuel systems lab here. A lot of people think that your instructor comes in teaches
the class and that's it, but there's a lot that goes on behind the scenes when you have a whole
lab full of engines that need to be able to run and do their job as training aides. A lot of
maintenance goes into this one, so I'll cover some of the things we're working on in here.
So this engine right here has been cranking really slow and been having issues starting. So
the first thing I want to do is disconnect these batteries and load test them, and this is a good
training opportunity for students. So in situations like this, this is one where I might find a group
of students that want to learn how to do this stuff and have them disconnect the batteries,
test them, and find out if they're good and kind of teach them where to go from that point if
they're good or if they're bad. So this one's having some cranking issues. This one right here
is one that we just got back from Cummins that they finished rebuilding for us, replaced some
bearings and stuff. So this one, really nothing going on wrong with this one at the moment.
The one that's right here, this guy is the newest one that we just got in here and this was a
donation from Cummins because their Cummins program is upgrading to the ISX-15s and the
high pressure common rail, so we're getting a lot of these HPITP engines from them. And you can see
that the only thing I really got going on with this one is I need to get the exhaust hooked up
for it so that we can run it in here. And then over here, we got a project that I'm almost done with.
One of the other instructors has done a lot of getting me the right parts and stuff, but
none of the plumbing was done. Air plumbing, coolant plumbing, all off kilter on this guy. So
we got new connectors, new clamps, new everything, new hoses. So just basically what's left on this
one is buttoning everything up and then filling it up with some coolant. And then if you look
on right here, we got the air filter for it. So we've got to basically design an air filter stand
for it to mount to the turbocharger and hook up the air filter. And then one thing I am still
lacking is there's a coolant hose that needs to run from here down here by the water pump.
Got to put that on, get it fixed. And then over here, we got one of our tune-up engines.
It doesn't run right now. I haven't figured out why because I haven't spent much time
troubleshooting it yet, but I think it might have something to do with the fuel shutoff solenoid
right here. But the tune-up engine, it's nice to be able to start it for them when they're done
with the tune-up to see if they did it right. So I would like to get this one running. So that's
kind of what I've been working on this week and just kind of share with you guys what's going on
behind the scenes. When it comes to the other engines, I'll tell you that when it comes to
like the DD engine here and then the Series 60 over here, these engines don't give me very many
problems. They're pretty consistent. At the most, I usually, you know, it's just normal maintenance
items. DPFs need to be cleaned, stuff like that. But rarely do I have any real issues with these
guys. The ISX-15 has been pretty dependable since we got it and started using it as a training aid.
It has some issues not liking to do regens based off of how it's sitting on this frame. I think
there was some maybe some wiring issues that sensor issues that the computer doesn't like.
I'm still trying to figure out the ifs, ands, and whys about that. So every time we do a regen on it,
I have to closely monitor the values and parameters to see what's going on.
And then we got our two medium duty Cummins right here. And the biggest problem I have with these
is just the DEF and the after treatment system making sure that the fault codes will let it do
its thing. Because that's one of the things I've noticed that when we take these engines out and
put them on these frames and have them out of chassis training aids is that the computers can
get confused pretty easily about, you know, like this thing will constantly not regen because of
simple things like the park brake switch or the ABS sensor fault. You know, stupid things that
you're like, it doesn't even have that. Why are you giving me a hard time? And then we got this
guy over here just works pretty well. So yeah, that's the biggest challenge when it comes to
running a class that has running working engines or out here in the main lab out that bay door,
we got all the semis. So another one of the projects I got going on is this is a water
pump for a cat. This guy's going to get installed on the truck right outside this bay door because
the old one was leaking on it. So lots of stuff, lots of learning opportunities. I try to take
advantage of this. So I'm going to maybe have some students help with the batteries on this
one so they can learn that. See if I have any students that are interested in doing the water
pump replacement with me on the cat and learning the little details about that job. But for the
most part, it's just daily upkeep, making sure they have fuel, making sure everything's good on
them. So I just wanted to share some behind the scenes stuff with you guys. Thanks. Please like
and subscribe.