This video offers basic electrical repair guidance for new automotive and diesel technicians, perfect for beginner mechanics who are just getting started in the shop. We'll cover essential electrical tools like wire strippers and demonstrate precise wire stripping techniques. Learn how to properly use heat-shrink tubing for secure wire splicing, along with other helpful tips and tricks for making reliable connections. A quick basic instruction on how to do a wire repair for those who have never done it before.
This video provides a foundational guide for novice automotive and diesel technicians on how to perform professional electrical wiring repairs. The instructor emphasizes using the correct tools and techniques—specifically the use of heat shrink tubing—to ensure connections are durable, moisture-resistant, and professional in appearance.
All right, so this video is specifically
for my new technicians out there,
and I'm talking green guys,
guys that are just getting into the shop,
just starting to learn how to do
automotive and diesel repairs,
trying to go over some of the simple basics
that nobody ever really covered with me,
that I wish they had.
And one of those is how to do electrical repairs properly.
So the first thing that,
when you're getting ready to do electrical repairs,
is do you have the right tools to do the electrical repairs?
Now, this isn't a video
about trying to sell you anything specifically.
Everything I'm using in this video,
I got off the TikTok shop,
but I'm probably only gonna pick one of these things
and put it in a cart down there,
just in case you're interested.
This is more about just teaching you guys
the right way to do a wiring repair.
So the first thing, you want a good wire stripper
that can also cut and do the crimping.
This thing can do all three,
but to be honest with you,
as much as I love Testament,
and as much as this is one of my favorite tools,
it's great at stripping and it's great at cutting,
but it's not super great at crimping.
I have a Matco tool that I use to do most of my crimping,
but I can't find it right now.
So we're gonna go ahead and try to use this one.
So when you're doing a wiring repairs,
it may, a lot of times, be an open wire or a busted wire.
So let's say you got a break in a wire.
There's a lot of different ways you can repair this,
and it kind of depends on the situation.
If it's a wire in a thing
where you're going to a commonly replaced component,
you might want to put a set of connectors
where they can be disconnected on either end.
If it's a permanent wire structure,
then you might want to use a buck connector
or do some solder work on it.
And either way, if you're using a connector or solder,
I highly recommend that we use a heat shrink,
which we're going to do in this video,
because that's going to keep moisture
and keep this from corroding.
There are other types of wiring repairs
that might involve communications wires
between different modules on the truck or the car.
And those are really, really sensitive
to changes in resistance.
So we want to be careful.
Make sure we read an OEM manual
to find out exactly how those types of wiring repairs
need to be made.
For example, D-Deck, they don't like it
when you go end to end like this.
They want these two to overlap each other
and they make a special connector that clips over them
and torque tightens down on them.
And then you put the heat shrink over that.
So you got to be careful how you're doing that repair.
Don't get all wacky with it and just kind of half-ass it.
Make sure you're doing it right.
So what we're going to do
is we're going to put a butt connector on this guy
and we're going to put on one end of the wire first
and we're going to take our fancy little testament here.
And you can see it's color-coded for you.
It kind of lets you know where to put
the different colors of connectors
when you're crimping them.
So put it in there, crimp it good and tight.
So got a good crimp there.
So maybe I was a little bit harsh on this guy
for how good it is at crimping,
but it actually does better than I remember.
Maybe it's just because I like
my little Matco tool I got so much.
Then we're going to put the other end in there
and we're going to do the same thing.
We're going to put it in the little blue end
and we're going to squeeze the crap out of it again.
And we got a good crimp.
Now, one of the things I want you guys to look at
is when you make these crimps,
these guys aren't good sealers, right?
They're not sealing on this wire perfectly well.
That's why I was saying earlier,
moisture can get in these very easily.
And if we get moisture in these,
we don't want that to happen
because then corrosion starts to occur,
the wires start to get weak and then this connection fails.
So we're going to use some heat shrink.
Okay, so this is the heat shrink we're going to use.
And this is also something that I got off of the TikTok shop
pretty good price for a large selection
of different sizes of heat shrink that you can see in here.
So we're going to open this guy up
and we're going to select the size
that fits on here the best.
And so I'm thinking it's going to be this blue one.
Now remember, just because it fits over the wire
doesn't necessarily mean it's going to fit
over the connector you put on.
So whichever one you're going to use,
make sure it'll fit over the connector
before you make the connection.
Because if you made a connection,
you're not going to have an open end to slide this on.
This needs to go on one of the wires
before you ever crimp this guy on here.
So now we're going on here.
And so, like I said,
this one's a little bit too small for this guy.
So we're going to go up a size.
We got this red one that's the next size up,
slide it over, and it fits over there really well.
So this thing has a lot of different pieces in it.
So you don't have to worry about not having the right size.
Unless you're working on something really large,
you're going to have the right size in this box.
All right.
Okay, so for this part, I'm going to be talking a little loud
so that I can talk over this guy.
This is a heat gun.
This is a really nice one
because it has different temperature ranges
that you can go to.
You can change it from Fahrenheit to Celsius.
It comes with a bunch of different attachments
that can go on the end.
Right now, I have what's called a heat reflector on it.
And you can even adjust the temperature,
which is something that heat guns I've owned in the past.
You either had a high or a low setting.
This one, you can change that.
So what we want to do is we want to put our heat shrink
in front of this guy,
and we want to get it nice and hot.
And it's going to start shrinking up this heat shrink for us.
Now, if you set it up too high and you go too fast,
you might end up burning this heat shrink
and damaging the wires.
I think I might need to turn the temperature up a little bit.
All right, so you want to get it nice and even
all the way around the distance of it.
And you want to make sure especially that it closes up
nice and tight on the ends of it.
That's going to keep that moisture out,
keep it lasting a lot longer.
So all this is really awesome.
So let me know what you guys think.
Is there any wiring repair questions
that you guys have run into early on in your career
that you have questions about?
Let me know in the comments.
But definitely, I think I can't overstress the importance
of the heat shrink part on a wiring connection repair,
because that's the difference between having something
that looks really cheap and generic,
like someone didn't care about their repair,
to something that looks like, yeah,
someone knew what they were doing
and took care to make a good connection
and a secure connection for you.
So it can also not just be a functional thing,
but a reputation thing.
So keep that in mind.
Thanks, guys.