Air Brakes Explained! Course 2 Front axle brakes, brake chambers, stroke and adjustment

Charley’s Garage
78 followers
2 Video Views·Jun 4, 2026
An in depth look at the front axle brakes, measuring stroke and using brake adjustment tools.
Link to air brake adjustment tools https://amzn.to/3NgX9nS
Link to website for FMSCR for regs and requirements: https://csa.fmcsa.dot.gov/safetyplanner/Default.aspx
Get vidIQ to grow your channel faster! 🚀
https://vidiq.com/CharleysGarage
AI Generated·May contain errors
All right guys, today we are talking about wheel ends in our second video on air brakes,
and we're going to specifically be talking about the front axle. So we're going to be looking at
how it functions, right? So when we look at this, we've got to understand that heavy-duty trucks,
heavy-duty commercial vehicles, they're very regulated. So things like your brake stroke,
which I'll show you guys here in a minute, are all things that you have to keep in mind when
you're inspecting and maintaining these wheel ends and the brakes on them, right?
Another thing you're going to need in addition to the website or this book in order to understand
what requirements you're required to meet is going to be some brake adjustment tools
if you don't have automatic slack adjusters. So there are automatic slack adjusters out there
that once you install them and set them, they're supposed to automatically adjust
as the brake linings wear. It adjusts itself to keep the rod length appropriate.
Those you should never be touching. If those aren't adjusting, you should replace them.
But if they are the adjustable type, then what you're going to see is something like this. Now
let me take this guy off and show you what I'm talking about here. All right, so what we're
talking about is here on this wheel end, let me see if I can zoom out a little bit here,
you have your slack adjuster, you have the rod, and you have your brake chamber.
All right, so what happens when this is functioning is that air pressure is going
to come into the brake chamber. That brake chamber is going to push this rod out and
move this slack adjuster. Right through the middle of this slack adjuster is going to be the S cam
going to the actual brake shoes and spreading them apart. You got to understand that a fully
loaded commercial vehicle can weigh up to 83,000 pounds. So if you're looking at the
amount of pressure that this thing needs to be able to force those shoes apart against that drum
in order to apply the amount of pressure you need to slow and stop a heavy duty truck,
this is incredible, which is one of the reasons why measuring and monitoring air pressures is
so important. But the other thing that we have to monitor when we're doing a PM on an air brake
system is the length that this rod moves. There's two ways to measure this. There's actual stroke
where you have someone step on the brake pedal. So you would measure the distance between here
and say here before it starts to move. And then after it's been pushed all the way out with the
brake pedal applied, measure the distance again, compare it to the spec in this green book or the
website that I showed you guys. And if it is not in spec, then on some of them like this one,
you can't adjust it. So right up here at the top is the adjuster. And right down here is the walk
for the adjuster. So I'm going to show you guys two tools. This tool right here is designed to fit
in here and it pulls the lock out. With the lock pulled out, what you can do then is come up here
to the top with your other tool and you can adjust it. Right now it's just clicking on me because I'm
holding the phone with one hand. So you would need both hands to do this. You need to pull the lock
out and then while you got the lock pulled out, you could adjust this. And what that's going to do
is it's going to adjust the stroke of this slack adjuster. So that's something you have to check
when you're doing a truck PM and making sure that something is safe for the road. You have to check
all your wheel ends because you got this stuff going on here at the front brakes that you got
to check on both sides. And then you come back to your rear axles and you got the same thing where
you're checking actual and stroke. And the stroke changes on type of brake chamber and so forth. So
you got to use the table that's in that green book or the website. Find your type of brake chamber,
then identify if it's a long stroke or a short stroke, which I'll go about explaining in a future
video. You got to make sure all the strokes and all these wheel ends meet requirements because
a DOT inspector can park a truck if we're out of specs on these. So this was just the brief one
on wheel ends. So measuring actual stroke, free stroke, comparing it to the spec in the book that
I dropped down there on the ground. And then making sure that these are, I'm going to put
these tools down there in a link so that you guys can see them. If you're working on air brakes at
all regularly, you need these two tools. They're fairly inexpensive, so check them out.
