Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool! – Haas Automation Tip of the Day
1 Video View·Jun 5, 2026
Today, Mark shows you how to save time and money by using your Insert Drill to perform both a drilling operation AND a boring operation.
Don't miss any "TIP OF THE DAY" videos. Click here (http://www.haascnc.com/subscribe_incl...) to join our email list!
If you enjoyed this video, please hit the like button and share it with a friend who'll find it helpful . . . and thanks!
AI Generated·May contain errors
Video Summary
AI GeneratedMark demonstrates a time-saving machining trick using an indexable drill to perform multiple operations. By utilizing a single tool to drill, turn the internal diameter (ID) contour, and chamfer, machinists can significantly reduce setup and tool change times, lowering overall production costs.
Hello, and welcome to the Haas Tip of the Day, where we cover the topics that every
Haas machinist needs to know.
My name is Mark, and I just finished my lathe setup early by using this simple machining
trick.
Now, we had to make a few dozen of these bushings quickly, but I didn't have the right size
boring bar.
What I did have was a good indexable drill.
So we drilled the part, and then using the outer insert, we turned the ID contour, all
with the same tool.
Now, if we're going to use an indexable drill, like a boring bar, we need to touch it off
like a boring bar.
In our case, we used the Haas Automatic Tool Presetter, and used a tip direction of two.
Now, we can save a lot of setup time by using an insert drill to both drill and chamfer.
You can also save a lot of tool change time by getting rid of one of your boring bars.
Talk with your tool supplier and see what insert drill they recommend that can drill,
bore, and chamfer, all with a single tool.
Well, that's it.
We were able to save both time and money by using a single tool to both drill and contour
the ID of our parts.
For more useful information and tips, be sure to check out the Haas DIY site at diy.haascnc.com,
and click on the link at the end of this video to subscribe.
Thanks for watching this Haas Tip of the Day.

