http://www.VideoJoeKnows.com Want to know how to seal a natural stone tile floor, by "cutting in" the edges? Cutting in the edges, when you seal your natural stone tile floor, is the best place to start. All you need is a cheap paint brush, for cutting in the edges of the sealer, to your natural stone tile floor. Only go out "this far" when you cut in the edges, as you can finish installing the sealer to the natural stone tile floor, by using a roller. Watch as "joe" shows you how to install sealer to a natural stone tile floor, by doing a little "cutting in". http://www.VideoJoeKnows.com
AI Generated·May contain errors
Video Summary
AI Generated
The speaker demonstrates the initial process of applying sealer to a floor, focusing on the \"cutting in\" phase. Using a paintbrush and a paint tray, they explain how to carefully apply the sealer along the edges and joints of the room to ensure full coverage before moving on to the main area with a roller.
Hey, I'm just going to have some fun today.
And I didn't want you to think this is how I dress all the time, I'm in flip-flops and
short pants.
I just want to show you, I don't just, I don't live in long jeans every day, alright?
And you don't need long jeans on to do something like this.
This is going to keep me nice and aerated.
So on your sealer, I've got some that I got extra from another job, so I only got like
yea much in here and that's going to do this entire floor.
But I've got to get a gallon of this stuff and I'll end up using more.
I've got an extra gallon here with me.
So I'm just going to pour some in here and I'm going to work out of this little paint
tray to do the cutting.
Ok, so I'm not going to, this is all I'm using for right now.
I'm just going to take my paint brush and I'm going to cut everything in before we get
into the roller.
Ok?
So I'll show you how to do that now.
Just going to take that brush, just put a little bit on there and then dab it off.
I can use that right up along this edge and just start your line and continue it through.
Ok?
I'm going to follow that back with a little bit more under the top, right along through
here.
And that's all the further I'm going to go out because then I can get the rest with the
roller.
Ok?
If you see anything building up, like see if you put on too much right there on the
joint, just wipe some of it off and brush off the top a little bit.
It's really not going to hurt if a little bit builds up, it just takes a little bit
longer for it to dry.
I like working out of this paint tray because I can just dab and go, you just have to be
careful when you move the paint tray that you don't slosh the sealer all over the place.
I haven't gotten one speck of sealer on me yet and I'm hoping not to this whole day.
But make sure you have a rag handy in case you get a spill or anything happens.
So I did that, I take the brush and kind of take it and wiggle it and kind of push it
right in.
Get it straight, now you can pull it along, nice even stroke there.
Like this knee pad.
If I didn't have this knee pad, oh, I don't know what I'd do.
Just a little garden style knee pad, that's it.
And you go up next to the carpet, be careful, you don't want to get it all splashed over
on top of the carpet, alright?
Be careful.
I'm just going to go out to about there, that'll give me enough.
See, I'm doing all this cut in and everything else is dry.
Then I can step over this line and do all my rolling the sealer on all of the main body
of the floor.
See, just kind of wiggle it in there, start your straight line, continue it over.
Then you can kind of go back, if you're better going this way, you can do that.
Start learning how to go in both directions, there, there you go.
It's just a given, the more you do this, the faster you'll get, okay?
And you'll just get better the more you do, there you go, ready for the roller.