INSPECT Like a PRO! The BEST Way to Check a Used Car

Ex Used Car
15 followers
AI Generated·May contain errors
Don't get stuck with the limit.
I'm gonna teach you exactly how to inspect a used car
before you purchase it, like a pro.
If you don't know, I own a car dealership
here in Southern Indiana, and over the last few years
when I left the Chevy dealership,
I have purchased over 500 used vehicles
from all over the country.
Now, I have looked at thousands of them,
and one of the best things that I've learned over the years
is how to inspect these cars properly
to not be able to sell a piece of crap.
The very first thing you wanna do
when you want to inspect a used car
is actually get it to be a cold start,
and a cold start means that the engine hasn't ran,
in my personal opinion, overnight,
but several hours for sure.
So you wanna do a cold start,
and when you do the cold start,
I recommend you be on the outside of the vehicle
and allow somebody to start it for you
so that you can listen to it.
So on some vehicles, like Fords, for example,
with the 3.5 liter engine or the bold Triton engine,
you're looking for awkward noises at startup.
Some vehicles have ticks,
some vehicles have other goofy things,
where we're looking for belt squeals, stuff like that.
So this has not ran for a couple of days.
We just got it.
We have not done our inspection on it yet,
so I'm gonna do a cold start for you right here.
And so you see, that started up with no issues.
You saw how it revved high and then came right back down.
That, because I deal with Subaru's all the time,
is a very normal characteristic.
At that point, what you wanna do is inspect the interior.
And we wanna start looking to see if there's any lights.
And definitely on the Japanese cars and stuff like that,
this light right here is extremely important to know
that that is gonna be blue at startup.
That is just basically telling you
that the vehicle is not up to operating temperature.
And before you do a test drive,
you want the vehicle to be at operating temperature.
It's the best thing to do.
So now that we have done our cold start
and we have looked at the gauges to watch of anything,
we wanna watch to make sure all the gauges start up
and they're moving, functioning, and stuff like that.
This is what we do now.
I'm gonna pop the hood.
And one of the few things that I personally like to do
is I just like to look around the vehicle.
So like on this instance,
we have a little bit of a bumper not aligned.
So again, this is pre-inspection on this particular car.
So we'll check that out once we do our full inspection.
And then I'm gonna come in here
and I'm gonna look at everything as the car is running.
Obviously we wanna be careful of ties and sleeves
and stuff like that.
The car is running.
You don't wanna get around these serpentine belts.
And in a nutshell, I'm just listening
and I'm looking for anything that's obviously wrong.
And if there is nothing obviously wrong,
just a couple of minutes later,
literally right now as I do this video,
the car is starting to quiet down.
This car is now warmed up and it's good for a test drive.
So the second step is what you wanna do
is go for a test drive.
And you want to ensure
that you do what's called a drive cycle.
A drive cycle is extremely different
from every single manufacturer out there.
So a good 30 minute test drive is extremely important to do.
And I do have a video on how to test drive a car
that I'll link at the end of this video.
So go watch that to get very specifics
on what to do for a test drive.
When you get back from your test drive,
you wanna go get the tools that you bring with you to this.
And we haven't talked about tools
because there really isn't much that you need.
First and foremost,
you need the how to inspect a used car checklist
that you can get at chevydudestore.com.
You wanna have a good flashlight.
This particular one is a thousand lumen flashlight.
So that way, even during the daytime like this,
that I can get in that engine bay
and the flashlight is gonna be at a benefit.
And then also I like to have a little OBD-II scanner.
You don't need expensive ones.
These are really cheap on Amazon.
You can get ones that plug into your phone for an app,
all that good stuff.
But this is really great because you don't need any power
and you don't need a huge expertise to know how this works.
And speaking of the OBD-II,
it's very, very important that you understand
how this works.
So first and foremost, when you plug in the OBD-II,
you need to have the vehicle off.
And when you plug it in, know where it goes
and you'll see power automatically.
And then what you wanna do
is have the vehicle in accessory mode.
You do not want the vehicle to be on.
So in this case, since it's push button start,
I'm just gonna push the button and should all come on,
maybe a second button.
There we go, second time.
And then I'm just gonna come in here.
I'm just gonna tell it to scan the vehicle.
So it's linking and we can see that we have codes found zero,
monitors not equal three, monitors okay,
monitors included.
So monitors not applicable are okay
because these are the readiness codes
and you gotta have a drive cycle in order for it to work.
So you can see that MIL status off
and everything is okay, misfire, stuff like that.
So this is what you're looking for when you're doing this.
And on this awesome one here,
what I liked also about these
is that I can hit the VIN number here
and you can ensure that this VIN number
matches what's on the window and in the doors
to ensure that nobody has stolen this vehicle in the past
and redone the VIN number.
But once I get back from my test drive,
the very first thing I'm gonna do is use my snipper.
I'm gonna make sure that there are no goofy smells.
So we're gonna look for oil smells like burning oil
and we're gonna look for coolant smells.
Those are typically the two biggest concerns
that we're looking for on a vehicle.
And just for a reference, burning coolant is a sweet smell.
It's very obvious of what it is
and you have a totally different smell
from when the burning oil is.
When burning oil is typically that,
it's just a burning sensation.
So you don't have to be a professional,
you don't have to be a mechanic to do an inspection
on a used car to ensure that you are buying something good.
I personally think that a visual inspection
from the top of the engine is a good indicator
if you have a good vehicle or not.
So first and foremost, you wanna look for everything
that could possibly have fluid.
So even if you don't know if it has fluid
or doesn't have fluid, you want to inspect it.
Obviously this right here,
this could be something with fluid.
It's not, it's air, but you can look at that
and around those seals to ensure.
On a Subaru, it's really nice to see our oil filter on top,
very simple, and we can see our oil fill is right there.
What I personally would do is I'd be looking down here
to see if there's any major oil spills down here.
Some of those oil spills could be from sloppy people
putting oil in a car.
So you wanna determine that.
You can start looking down at your serpentine belt.
Your serpentine belt, you're gonna look on the inside here
to see if there's any cracks.
If there's major cracks, you wanna do that.
A serpentine belt only costs 20 bucks
and it's really simple to put on,
but you just gotta understand how to do it,
but you can have somebody do that for you as well.
You can see there's a little bit of rust down there.
That's not a concern on this particular vehicle.
I'm gonna start looking in the cavities of the engine
to make sure there's nothing up here.
I know on this particular car,
you can see the RVT right here.
See that gray seal right there?
I know that that is sealing something in.
So I'm gonna start looking to make sure
that there's no oil or anything there.
On this particular car,
I know we have cam carrier bearings over here
and that we're looking for oil and stuff like that.
Again, you don't need to be a trained professional.
I'm gonna start looking down in here.
I'm gonna start looking down there.
I'm gonna look at every possible angle
that I can in this engine bay
to see if there is anything liquid
or what could be a leak.
And again, I can't stress enough
that you don't have to be a trained mechanic
to look for this stuff.
If it looks goofy, then hey,
now you can go to get a second opinion
or have a pre-purchase inspection done on the car,
which I always recommend to do prior to purchasing it
because one of the things that we can't do on the lot
is get under the car
and most likely the dealership that you're taking it to
or the private individual that you're buying it for
is not gonna put this on the lift
or even have access to a lift to inspect the underneath.
Again, a lot of stuff can be seen from the top of the engine
with very minimal risk to anything leaking underneath.
One other thing that I think you need to know and understand
is also looking at some of these engine covers.
Now, this particular engine does have a cover on it
and it's gonna take a couple screws to unbolt
to be able to look at it,
but you really need to take up these engine covers
to make sure that we do not have any liquid up there.
As we see on the Subaru here, everything is open.
There's no engine covers on it, so it's very easy to see,
but don't be afraid to get something up
and take this engine cover off
because there is liquid under here
that could be seeping out
and seals and gaskets that could be leaking.
So you definitely wanna get up under here
and ensure that there's no leaks as well.
Now, the next biggest thing is safety
and safety is obviously usually one of the biggest things
that people want to have in their vehicle.
And unfortunately, Carfax and AutoCheck are a great tool,
but they're not the gospel, they're not the Bible,
and you can use them as a tool,
but you can't rely on them to be always accurate.
I've talked about this in the past before.
My wife, a few years ago, got rear-ended in a Tesla
and I think the Tesla Carfax says it was hit on the side.
We have video proof that it was not hit on the side,
only in the back, and it was very minimal damage
with just the cover coming off.
So one of the things that we wanna definitely look at
in the back is lifting up all of these covers.
We wanna ensure that these are all up.
We can look in here and we can inspect the tub of the car.
So obviously there's nothing crazy here.
We want to inspect these seams right here,
and you wanna be able to lift these up as much as possible.
And if you start looking in here,
you can see that these seams have never been touched
since they were brand new from the factory.
So you wanna check that there as well.
And you also, because this vehicle
has got a big old sunroof,
and luckily it's been raining here in Southern Indiana,
we can also check to make sure
that the sunroof is not leaking
and that there's no water back here as well.
And as far as safety goes in the front,
there's a few things that we wanna look at up here as well.
So everything that I look at,
I look at these cross members right here.
I start looking up here and we wanna look at bolts, right?
So we can look at this bolt right here
and I can look at that bolt
and know that it's never been turned.
So this car most likely has never been in an accident
so bad that we've had to replace the hood
or anything like that.
These are body colored, there's no scars,
there's no scrapes on there.
And when they put these bolts on from the factory,
they do it so precise
and with some crazy expensive machinery
that it does not chip the paint once it's on here
because these are not painted like this altogether.
I'm gonna start looking at what would be the crumple zones.
So again, I'm gonna start pulling this stuff back
if that's there to ensure you can, again,
look at this bolt right here
and see that this bolt has never been turned
by a body shop or anything else.
And then I'm gonna look a little bit more
into the cavity of the engine compartment
and that right there, this right here,
right where my laser's light is at, right there,
that is the frame rail of the car.
So I'm gonna start looking at that.
You can see where that little bit of rust is there.
Again, not concerned about the rust
because this is an aged vehicle with a very minimal stuff,
but I'm gonna look at that to ensure that
that is not damaged in any way, shape or form.
That is your core support of the car.
Again, I'm looking here
and I'm gonna start looking down there.
I'm gonna start looking here.
Again, this is a visual inspection
that you can do in a few seconds.
As I mentioned earlier in the video,
we have bought over 500 cars
and inspected over thousands and thousands of cars per year.
And over my 25-year career,
it's probably close to hundreds of thousands
that I've inspected.
I can literally look at a car in less than five minutes
and have it all figured out,
looking at it to do like an appraisal
or if I wanna purchase it or whatever the case may be.
Somebody stops by and asks me questions on it.
Within about five minutes,
I can see what's going on with the car.
So it doesn't take you very long to do this,
even though this video is a little bit longer
so that way I can educate you
on everything that we do want to look at.
Because when I'm doing this stuff,
I'm literally coming in just like this
and I'm looking, I'm looking, I'm looking,
I'm looking, looking, looking, looking.
And I'm pretty much done with the engine bay of this.
Again, I'm a trained professional.
I've been doing this for 25 years.
I've got hundreds of thousands of inspections under my belt,
but that's what I look at when I look at a car.
So one of the things that you wanna do on your test drive
is obviously make sure that the driving components work.
The cruise control, the lights, stuff like that,
turn signals, whatnot.
So one of the things you wanna do
when you get back at some point
is ensure that everything else works.
And you want to hit the window switches and stuff like that.
And just because this window switch works
and rolls that window down,
doesn't mean that that window switch over there
is gonna work.
So you need to go to the individual doors
and start touching these things that are important.
You wanna move your mirrors around
all different directions, up, down, left, right.
Same with that one over there.
You wanna start pulling things away.
See, took that off.
That's a fuse box right there.
You wanna make sure that the memory works.
You wanna make sure that the lift gate works.
You wanna start pushing all of these buttons.
Put it in reverse.
You should've done this on your test drive.
Put it in reverse.
That way the backup camera works and is aligned correctly.
So you want to start pushing every button
that you possibly can.
On a sunroof car, I'm gonna hit the sunroof button
to make sure that it goes back
and opens up in a proper function.
There's no grinding noise.
There's nothing like that.
Also wanna inspect anything that comes up, up top here
to see if that is working correctly.
So typically speaking, if there's a problem,
there's gonna be some sort of indicator
on these newer cars that's gonna tell you there's a problem.
And that's where our OBD-II scanner
is gonna come into play to inspect the car
to ensure that there's no issues with the computers.
But like, if the AC wasn't working,
that light might flash.
So if you see something like that,
understand that there may be a problem.
So if you're in the wintertime checking AC,
you're not gonna be able to do that.
In the summertime, you know, if it's 90 degrees out,
you can't really tell if the heat's working.
You should get a good sense of it,
but it's still tough to check on a 90 degree day
that the heat's blowing out at 72.
And I think the only other things
that you really need to be concerned about,
especially if you're on a budget
when you're buying this used car,
again, from a dealer, from a private individual,
it doesn't matter, you're buying a used car,
is just understand what tires and brakes go.
Your back brakes, you can kind of gauge
based off the mileage.
This particular car has got 97,000 miles.
The likelihood of needing back brakes is extremely low.
Front brakes, it possibly could.
So it's tough to see, but a good rule of thumb that I like
is taking my phone and I like to put it in there
and get a picture of the pad so I can see the depth of that
if you cannot take this wheel off and measure it properly.
As far as tires, you wanna measure all the way across,
not just the middle.
Everyone always talks about the middle.
I think you wanna measure all the way across and watch.
Typically speaking, 4.30 seconds is your bare minimum.
If you're buying a car,
that 4.30 seconds is gonna get you a season,
like winter into summer or winter into spring
or mid-summer into winter, something like that.
So you wanna make sure that there's
at least 4.30 seconds out there.
Typically tires come with 10.30 seconds.
So that is 40% of tire life left on that.
But those are probably the only other things
that you really need to be cautious about.
The biggest thing, I promise you 100%,
the biggest thing is to do your proper research
on Carfax, auto check, test drive the car properly,
and just take some time to think about it.
