Барельеф цветы 3 урок Bas-relief flowers 3 lesson

Skillful Hands
120 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThe video provides a step-by-step tutorial on repairing and finishing decorative elements (referred to as \"cookies\") using putty, sanding, and painting techniques to achieve a smooth, professional surface.
Now we will be making cookies, as they are called.
I took the toothpicks.
Actually, I also know about the deepening.
I don't know how much it hurts, as far as I can see.
I'm making the recess going this way.
I'll apply the putty here and show the surrounding area.
You will see how everything will unfold.
I have already finished the thick putty application here.
As usual, I make it as dense as possible.
I also added a small amount of PVA here.
Because no matter what, it will still dry quickly.
To make it sturdy, I added a small amount of PVA.
About 10 percent there.
And also, here too, liquid plaster.
And in order to address all these small details,
All these scratches, to be filled with putty.
I will mainly apply the putty using a brush.
I'll apply the layer with a brush, as if we were painting.
I'll apply it and then carefully sand it all once it dries.
And it will already be ready for painting.
You see, all these dimples, scratches—everything will be hidden here with us.
And I'll polish it using this kind of sandpaper.
You see, number 240.
Such a thing wasn't available in every region.
You see, the password.
And I have 240; maybe you can find something similar with the same number.
But there might be a coarse fraction there, or perhaps a fine one.
Therefore, you need to check individually for each one what kind of sandpaper will be suitable.
Well, for the finishing work, I'll take this fine white one.
The squirrel will be one of them.
Alright, now I'll do everything.
That is sufficient, in principle.
Please note, when I apply it, I already start by pulling out the foot-tip and rubbing it in thoroughly.
Not just sticking it there and leaving it, but rubbing it in thoroughly, so it sinks in and holds firmly.
So that tomorrow they don't just take it like that and rip it off, peel it off.
What I'm about to do right now will hold very tightly.
The most important thing is to prepare the base and apply a coat.
And one more thing.
The stem is coming through.
The stem is there so that she wouldn't be so much like the stamen, not so much like that.
Exactly from the stem.
This moment also needs to be taken into account.
Therefore, we also pay attention to these aspects.
Then, the stem might be like this, the stamen might be like this, or like this.
To prevent all of this, she starts arguing.
This aspect also needs to be taken into account.
That's all, I'll show you right here.
Then I will apply primer here.
Just ready to be used for this plaster.
It is better to clean off dust before priming.
Completely clean from dust.
Apply the primer everywhere.
And that's it — this will be almost the final layer for us.
After that, I will also apply a primer and then proceed to paint.
I've already explained why I'm doing this.
I'll apply a primer so that this putty doesn't dry out too quickly.
There's a situation where, if the putty dries too quickly, it starts flaking off.
Therefore, the same applies before painting.
But you can also prime it before painting.
The most important thing is to clean it thoroughly from dust.
When we have thick spackle, it doesn't stick to the mastichine.
It doesn't stretch anywhere, won't go for the brush either.
Just a little dampen.
Slightly dampen it, as you can see, even soaked the brush like this.
I made the strip.
Such tiny dots.
Just a little poke.
It came out a bit rough.
And once again, when we're pushing through it, the most important thing is that the shape must not be lost.
So she wouldn't become a pancake.
So that an entire circle doesn't fall out.
We do it from all sides here.
While I'm still applying the liquid filler,
I'll occasionally still adjust it, refine it, and give it a bit more shape.
And that's it. Just polish it afterward and paint it.
I will paint it in one tone.
I might add a touch of pearl effect somewhere.
Such an effect was achieved as well.
And that's it, basically.
Alright, I took up the brush.
And we apply it calmly, just as calmly as we apply the paint.
Yes, there will be streaks left by this brush, by this roller.
But we'll clean all of this up.
We'll gradually clean all of this later.
All such things.
There are some large frying pans somewhere.
I'll squeeze through slightly.
This putty.
Here. And everything else.
In a couple of steps.
One layer was applied; it dried slightly.
Then the second layer.
A millimeter thick layer or so.
Slightly more than 0.7.
Average millimeter so that the thickness is correct.
Something to sand.
To fill up all the small dents completely.
So that it is perfectly smooth for you.
This is in several stages.
We will apply two layers.
How you usually paint.
The same thing.
So that the putty gets everywhere.
So that there isn't such an empty, incomprehensible feeling.
Remove it.
A layer like this.
Then sand it down with sandpaper.
When it's all dry and smooth.
You will see the result.
How will everything look?
Final result.
Here again.
A bit more carefully.
These cookies are made.
I don't even know what they're called.
I don't know.
Somewhere you can get a smaller brush.
In such inaccessible places.
And with a small brush like this.
Carefully.
A thin layer everywhere.
It dries up.
A second layer is needed.
The task is set.
All the dimples.
Pour.
Dimples.
Pour everything in.
All done.
That's enough.
The most important thing.
So that the shape won't be lost.
We're waiting for it to dry.
And let's start stripping and painting.
It's all dried up already.
I'll polish it slightly.
Small imperfections.
Dimples.
I'll clean it thoroughly.
It will be smoother.
Grounded.
I'll apply the primer.
And I'll paint.
I'll paint too.
I'll paint it in one tone.
That's all.
Finished work.
Thank you.
Grounded.
We wipe off the dust.
Preparing the paint.
Soils.
And that's all.
In hard-to-reach places.
How am I going to prime it?
I'll take it.
To go through with brushes.
It will dry up.
And it's all ready.
It will be possible to paint.
I am using matte acrylic paint.
I am using synthetic acid.
A chain won't work inside here.
The brush is already here.
The brush is also shaped that way.
Not so.
The brush also leaves faint streaks.
Carefully.
I'll throw it inside.
In the direction of the chain's shape.
It's still visible here.
How gypsum board shows through.
Now another lady.
How will it dry.
And it's all ready.
After the departure.
The first morning.
We will highlight the edges.
And it's all ready.
That's how everything looks.
You see.
Volume.
Smooth. Clear.
The paint has already dried.
Now I will apply it slightly.
silk
The first morning.
I'll give such a light tone.
So he wouldn't stand out too much.
I don't see the point in making it colored.
But at your own wish.
Anyone can do something similar if they wish.
And although it's colored, paint it.
Here I will take a large amount.
I won't be too much
its use.
So it doesn't burn too much.
Such a subtle effect, darling.
As you can see at the end.
Also, here the cup is damp.
If anything,
I'll help.
Let's shoot.
Also today is the first morning.
Be more careful.
Beyond the boundaries
Ours
Nothing came of it.
In principle
such an effect
Enough.
As one pleases
Make a similar color.
In different tones.
Such a subtle effect, darling.
He doesn't stand out particularly.
But at a certain angle
Very interesting.
The paint is resistant to rubbing.
If anything, I'll wipe it a few times.
Not to mention the paint
stronger than the paint.
Now everything else
I'll do it too.
And thus it is
Ours
Looks like color.
This is the most
simple, one could say
basic version
Do something similar.
Various shapes can be made.
Various shades.
Here I chose a simpler one.
That's how everything looks to us.
All is well, smoothly.
You must try your hardest to maximize
Smoothly do it.
So that the form looks good.
So that the shape is not lost.
That's how everything looks to us.
Nothing extra.
Do you see how it looks?
Here.
Now evenly
I'll skip it.
To prevent losing shape.
Nothing extra.
