I Modded My Steam Deck Now It s PERFECT

SilkRoad Technology
124 followers
#technology #highend #gadget #robot #apple #iphone #macbookpro #gaming #accessories #gears #samsung #tesla
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker documents a comprehensive hardware modification of a Steam Deck to create an ultimate handheld gaming machine. The process involves installing a protective case, upgrading the SSD for more storage, replacing joysticks with Hall Effect sensors to prevent drift, and performing a high-risk full body shell swap to achieve a unique, transparent aesthetic.
I love my Steam Deck. I've been putting some serious hours onto this device, and it's handled
everything I've thrown at it so far, like installing emulators to play retro games and
docking it to play on my television. But I still feel like we could get a little more out of this
$550 handheld. I mean, I want to push this thing to its limit, and possibly even break it. I mean
that in a good way, of course. I'm going to try installing a variety of physical upgrades until
I've built the ultimate handheld gaming machine. Yeah, you guessed it. We're modding this thing,
baby. Hopefully I don't push myself to the limits in the process and break myself.
Now, I have a total of five upgrades I want to complete, all of which get progressively
more difficult to install than the last. But I believe we can pull this off, or so I thought.
To keep things simple, I started off with one that seemed pretty easy. An upgrade I believe
everyone can do at home, and anybody can. This is the ultimate line of protection from anything you
can think of. Grape juice, Cheeto crumbs, and worst of all, dust. Plus, it offers great drop protection,
a better grip, and it's eco-friendly. Yay! The upgrade I'm talking about is the protective case
from J-S-A-U-X? J-SAUCE? J-S-AUX? J-SO? I don't know. This thing. At first glance, this thing looks
beefy, weighing in at a whopping 294 grams, I think. In fact, they recently updated the list of
things able to survive a nuclear blast, and the only two things on there are cockroaches and this
giant case. However, I was a little worried that it might be too bulky and impractical for everyday
use, especially in my small hands. But I wanted to actually get it on there first and see how it felt
in my hands before I rushed to any judgment. And when I first went to put it on, let's just say I
struggled a bit more than I would have liked. Okay, I know I said this was supposed to be the
easy one, but is it just me, or is this kind of difficult to get on my Steam Deck? To be fair,
I didn't read the instructions or anything, but you, read the docs. But it did feel like I was
about to break the triggers if I kept forcing this hefty case onto my precious, loving Steam Deck.
However, after a little finessing around, I managed to get it on there without any harm.
It's kind of like snapping on a new phone case. You're trying to be all gentle with your shiny
new $1,200 smartphone, but sometimes you just have to force that sucker in there. I know it hurts,
but it's for your own good. After getting the case onto my Steam Deck, I gotta say, I'm a fan.
This thing feels really good in my hands. My very, very hairy male-like hands. Sorry,
I forgot to shave this morning. The first thing that stood out to me were the textured
grips. It felt like the deck was almost glued to my hands, and all my fears of dropping it
were gone forever. Which wouldn't matter anyway, since this case offers such great drop protection,
with its thick edges and sturdy construction. This case also included a rather sturdy kickstand on
the back, which is a great feature if you're out and about and you want to go hands-free,
or even play some two-player games and can't connect to a dogging station. Something so
simple really adds so much to the case. While I was looking at the back, I realized there was also
this strap included in the box. That kind of looked like it was meant for a smartwatch or
something. That made me really start to think that maybe I should have read the instructions.
On the website, they'd say that you could strap power banks in the back of the case, so you're
not supposed to wear it like a smartwatch. So you can keep gaming on the go with more battery.
That's actually a really smart idea. While I was on their website, I did see a few people mention
that it didn't fit their backpacks well. So as a final test for this upgrade, I'm gonna check that
out for myself. I mean, it's gotta be able to fit into my 26 liter Able Carry Max EDC backpack, right?
Overall, despite it being on the larger side, this case is really nice. It offers great protection for
your Steam Deck, and it'll probably fit into your backpack too. So I definitely see myself getting
some use out of it. But before I can leave it on here for good, we've got four more upgrades to do.
Hey you! Are your floor mats dry, dirty, and all cracked up and worn out? Well, you deserve this!
If you've been upgrading your phone and other tech items, then you've got to upgrade your floor mat.
Boom! These are the Last Fit Floor Mats from today's sponsor, Last Fit. I know what you're thinking.
Why upgrade my floor mats? Well, Last Fit makes custom cut floor mats for your exact vehicle.
They're not the cheap universal ones that slide around and bunge up under your pedals. They fit
perfectly and don't get in your way. They're made from thick TPE material that won't curl,
crack, or warp like OEM mats. I've had spills, mud, and honestly a tiny disaster involving spilled
milk and throw up in a RAV4, and these still look brand new. That's because the deep channel grooves
trap dirt, junk, and spills, so they don't go sloshing around your floorboards. Cleaning them
is stupid easy. Just pull them out, hose them off, let them dry, and you're done! No scrubbing
carpet mats and no weird stale milk smells. If you have a baby, you understand. And they're
anti-slip, so they stay locked in while you drive. If you're busy and you've got kids, pets, or a
messy lifestyle, they genuinely make life easier. Plus, they're reusable and recyclable, so when
they finally wear out years from now, they won't end up in a landfill forever. Right now, Last Fit
is celebrating their 10th anniversary and they're giving you a special 20% discount with my code
SE20. Just hit the link in the description, enter SE20 at checkout, and upgrade your ride.
Thanks again to Last Fit for sponsoring this video. Taking off the case was easy, but holding
my Steam Deck again, now all bare bones, is making it look kind of plain. However, I've got a solution
for that, as you'll see later on. For our next Steam Deck upgrade, we're going to kick the difficulty
level up a notch. With all the hardcore gaming I've been doing lately, I constantly have to uninstall
games just to try out new ones. Well, look no farther, because I'm nipping this in the butt
for good by increasing our internal storage by four times the amount. But in order to replace
the small 512 gigabyte SSD with the larger 2 terabyte card, we're gonna need some tools.
Specifically, this iFixit Essential Toolkit that promises to have all the things you need to take
apart your Steam Deck. Honestly, any precision screwdriver set will do the trick, but this one
promised to have it all. For my SSD upgrade, I went with the Sabrent Rocket Q4. This 2 terabyte
card offers tons of extra space for all my games, at least until the next Call of Duty launches,
that is, and it should also increase the speed of game installs and load times. Speed, baby! But
first, slow down, partner. Before you start cracking open your Steam Deck, it's important
that you do two things. First, check that you removed the SD card from its slot, because if not,
it will get damaged, and nobody wants that. Second, it's recommended that you copy over your
old SSD onto the new one prior to removing it by using an external enclosure, like this one here.
This keeps it safe and lets you use it as a portable storage device. Pretty nifty, huh?
If you skip step number two, you'll have to start from scratch and load up a new OS, which
might be fun? Banzai'd anyone? Okay, now that that is all out of the way, it's time to risk
my favorite handheld for a little more storage space. Man, I'm starting to regret all my decisions.
Is this really worth the upgrade? But alas, I'm dedicated and the show must go on. First,
we have to remove these eight itty bitty tiny microscopic screws back here and pry open the
back cover using a pick from the toolkit. I can't lie, I was pretty nervous going into this. After
all, I'm completely new to the physical modding scene, and breaking something while cracking open
a case just seems like a noob mistake. I've only made keyboards, but this, this is way harder. But
once I got past the initial nerves of cracking off the back shell, I got a little boost of
confidence. Being able to see everything laid out right in front of me, seeing how it's all connected
and it's working together, it's just so freaking cool. Sorry, this stuff gets me a little excited.
So the next thing you do, and this is a very important next thing, is you disconnect the
battery. Always do that before you start taking anything apart. Those lithium-ion batteries don't
play around. I was smart and drained the batteries the night before. Ran cyberpunk on it all night.
Next, you need to disconnect this long black cable going across the bottom that connects the right
side and the left side. Honestly, I have no idea what these cables do, but they're all necessary
for a perfectly working Steam Deck. So you don't want to mess any of this up, and I prayed I would
do it right. So you just flip open the little white clip holding it in place, give it a little pull,
and it slides right out. That's easy enough. I hope the rest of it will be this easy too. Now that
that's out of the way, just remove the two screws holding down the cover plate over the motherboard.
At this point, I was really starting to feel like I was doing something special, like birthing my
first child. It's also worth mentioning that the more organized you are, and the better you keep
track of your screws as you take them off, the easier this process is going to be. After all,
when you take something apart, you have to eventually put it back together. And a simple
way I found to do that is by using ice cube trays. Bonus points if they don't have ice in them. These
are special because they come with lids. Now once that cover plate is removed, you can already see
the SSD at the bottom left. Just take off one more screw and this little guy will pop right up,
ready to be replaced. I can already hear him screaming, no don't pull me out, save me! Next,
all you have to do is put everything back together and pray that it works. Remember the part how I
said it's important to copy over your SSD prior to swapping? Yeah, I never did that. Oh well, I don't
see why I just couldn't do it from the external card to the internal one, right? That makes sense
to me, I'll do that at the end. Moving on! Our next upgrade should put a stop to a major issue plaguing
all gaming consoles everywhere. This small issue can cause what is otherwise a perfectly good
controller to be chucked into the garbage bin. And that, my friends, is the dreaded stick drift.
But today we're going to get ahead of that issue on our Steam Deck and upgrade our joysticks with
Gully Kit's electromagnetic joysticks. These joystick replacements promise a super smooth
gameplay experience with no stick drift to maximize the life of your beloved Steam Deck.
And since this install requires zero soldering, this should be a fairly simple process. It's
important to note if you're doing this on the LCD model instead of the OLED model like what I have,
there will be a switch on the back side of the joysticks and you have to select between A or B.
To find which one is right for you, you go into your Steam Deck settings beforehand. Yeah, I said
beforehand. And check your controller ID. If it starts with M-E-D-A, you need mode A. And if it's
M-H-D-A, you need mode B. And if it says M-K-B-H-D, you've scrolled down a little too far. Go back up.
I have to say when I first pulled these out of the box, I was a bit surprised by how identical
they looked to the original joysticks. I know they're marketed as a repair slash replacement
product, but I guess I was expecting the grip to be a little different or a little something
special. Regardless, I'm excited to put an end to stick drift. My confidence levels going into this
upgrade were pretty high. I just upgraded my storage and this honestly looked like it was
going to be even easier. Modding sure is fun, isn't it? Removing the old joysticks was pretty
straightforward. You just disconnect the battery, remove a few ribbon cables, and you're ready to
take out the screws holding onto the sticks. But when it came time to install the joysticks into
their new home, there were some issues. First, I struggled getting the sticks to fit. The boards
on the back kept hitting against the rear triggers and I was afraid to remove them and damage the
springs. I mean, what if I accidentally break something important? That would be the end of
my steam deck. Just kidding. I could always put the old joysticks back in and enjoy some more stick
drift. And once I eventually got them into place, trying to hold the steam deck with one hand while
getting the tiny screws into the holes with the other. Yeah, that didn't go on so well. However,
once I got the first joystick installed, I was ecstatic. That is until I tested it out and was
completely shocked by the result. I pushed the joystick all the way to the side. It was just stuck
there. What the heck? It's like I paid to give myself stick drift. I must have done something
wrong during the installation. I couldn't let that stop me from moving forward with the next joystick
though. And thankfully I did, because when I installed the second one, I realized that if you
tighten the three screws holding down the joystick to the deck, it makes the stick really tight to
move around. So I gave each screw about a quarter turn to loosen them up and that fixed the problem.
I still need to power on my steam deck and test them all out, but I can't do that until everything
is installed. So right now the best thing I can do is pray I did it right. But overall, this upgrade
wasn't too difficult, assuming everything works of course. And I'm actually having a lot of fun
tinkering with a steam deck. It really feels like adult Legos or raising a child. Now this next
upgrade is going to be the most visually drastic one we've done so far, but it's also going to
require the most effort. After days and weeks of constantly staring at my black steam deck with
the black buttons, I realized I could do better. With upgraded buttons, no more boring black. Not
only is it a nice visual upgrade, but they also give you a better grip during gameplay. Because
let's be real, the steam deck can get pretty hot while you're playing and my hands do be getting a
little sweaty, especially when I play Stardew Valley. There's nothing worse than being in the
middle of an intense game of Tony Hawk's Pro Skater. You're about to break the record for the
highest combo, but then oh your finger slips because you're all sweaty and now all your friends think
you suck and that you didn't actually play Tony Hawk growing up. Wait, where are my buttons? It
says they were delivered. I guess they lost my package. Maybe next time I'll swap out the buttons
or when you're not watching. Now for the absolutely most grueling, time-consuming, and hopefully
rewarding upgrade. This upgrade will take our ordinary boring looking steam deck and make it
distinctly unique, giving it a custom look that is 100% my own. The full body shell swap.
This product from Extreme Raid gives us all the necessary items we need to completely swap the
outer shell of our steam deck. But before we begin, I need to introduce a few new tools that will make
all of our lives just a bit easier. That's the eye opener kit from iFixit. Eye opener, I get it. Which
will be your best friend later on when you have to remove the screen from your steam deck. I told
you this upgrade is insane. You can always get away with using a hairdryer, but this will make things
10 times easier. Or if you want to really heat things up, you can get an industrial heat gun.
First, let's open up this box and see what our new shell looks like. I see they gave us the new springs
and screws, but I'm basically a pro at this point so I'm sure I won't be needing any of those. I was
moving a bit quicker at this point. I mean I've been doing it all day, opening it, closing it,
I'd already done the first few steps a couple of times already for the previous upgrades. Or maybe
I was just anxious to see all of it come together and check if my steam deck still actually works.
Or maybe at this point, it's just an expensive brick. One beautiful expensive brick. But so far,
things were going smoothly. I had already gotten one side done. I was absolutely dreading removing
the screen. There's nothing I wanted to do less than remove the screen. It's such a nice expensive
OLED screen and it looks so fragile. And since nothing has gone wrong so far, there was a high
likelihood that this could be the moment. When it all came crumbling down, I finished up on the left
side feeling pretty confident. Just needed to redo everything on the right and then it was into
uncharted territory. Dun dun dun! And that's when it happened. I was moving too fast and I broke
something. I had to walk away, blow off the steam. I just felt like my world had just ended. This
small little piece of plastic just cost me my entire build. After I did some deep breathing
in the corner and ate some hot cheetos, I went back to inspect the damage. It was this little
plastic clip that's holding in the ribbon cable for adjusting the volumes for the onboard speaker.
So hopefully it's not that important. Moving on to the guts of the steam deck. This is where
things got even more tricky. It's spicy now. I realized halfway through the teardown that I had
been following instructions for the LCD model and for that version you had to remove the entire
motherboard which would entail doing so much more work like removing the heat sink and the fan and
everything else. So I had already started to disassemble the whole middle section. Only to
realize there was no point. I'm not gonna lie, I was pretty stressed out right then. I potentially
just damaged some pretty expensive parts and you're telling me it was for no reason? Due to my
high stress levels, I wasn't sure if I could put this thing back together. All my confidence was
seeping away and I was now at peak frustration. And to make things even worse, it was time to
remove the screen. Yay. But on the bright side, my buttons just got delivered just in time. The purple
glossy buttons from deck buttons are going to pop so nicely against the clear shell. Only if I manage
to put this thing back together and hopefully give me some better grip too when I'm doing some
hardcore intense gaming. Yeah. That was a nice surprise and all but alas, I still had to remove
the screen. It was waiting for me. But once I get past that, then the fun really begins. And I get
to put everything together in the new shell, test if my upgrades work, no pressure. Before I busted
out the heat gun, I tried going in with the eye opener. The instructions were straightforward. You
put the long gel tube into the microwave for 30 seconds and then you place it onto the edges of
the screen to warm up all the glue inside before sliding in picks. And after a few attempts, I
managed to finally get a pick under the screen, which really felt like I was doing something wrong.
Out of all the fragile electronics and thin ribbon cables, nothing felt more like it was ready to
break until I started to pull that screen off. Be extra careful though, because there's this pesky
ultra short ribbon cable behind the screen that's still attached that you'll need to disconnect
right after you pop the screen off. However, after I got the screen loose, my confidence
that I could finish this project was through the roof. After all, that was the hardest part, right?
Like a hermit crab moving to his new shell, my Steam Deck was ready for its new home. Now all you
have to do is reverse the steps of everything we did and we can finally test out the Steam Deck
and see if everything works. Putting it all back together went fairly quickly for I, a tech nerd.
It helps to have everything labeled, and of course, this time I was sure to install our new
purple buttons instead of the clear ones that came with the ExtremeRate shell. Everything went
smoothly until it was time to put on the back side. If I did everything right, the new case was
supposed to just snap back into place and fit together perfectly. It even says on their website
that this is rated to be 100% the same genuine part blah blah blah. Well, to that I call BS,
because for some reason, the sides didn't line up right, which made me think,
did I do something wrong? I probably did something wrong, right? Did I? Was it me?
So I started to disassemble the right side, paying close attention to see if I could figure out what
the issue was. And that's when I realized I didn't do anything wrong. I mean, of course I didn't. I'm
a professional after all. But for some reason, the controller boards just didn't 100% fit right,
which caused the top clip on both sides to be pushed out just a fraction of the hair.
Thankfully, it was only a very tiny plastic piece that was causing the issue. So I was able to make
the executive call, just clip it off and boom, perfect fit. And I'm really happy with how it
turned out. It looks absolutely sick, but looks don't mean a thing if it doesn't work, right?
Now for the moment of truth, the test that it still powers on. Okay, I still have to copy over
the SSD. Maybe I'll start from scratch. I have a lot of time later for that though. I'm just so
excited that it turned out so good. If you like the upgrades, be sure to check them out in the
description and let me know which one was your favorite in the comments below. By the way,
LastFit is giving you 20% off their custom cut floor mats. That's only for a limited time because
of their 10th birthday. Happy birthday! So if your car needs a quick upgrade that you'll notice every
single time you drive it, hit the link below and use code SC20 before the discount disappears.
Future you will thank you. If you want to do more cool stuff to your Steam Deck without breaking it,
check out this video here. Look at this thing. This is so sick. The OLED screen just screams.
Oh, so beautiful. And it's lighter weight too, surprisingly. Side by side, before, after. Beautiful.
