The APOC got an update to V2. We tear into it to see the updates and changes to this hybrid carrier to see if it's still a top pick. Is a soft armor and hard armor combo the best choice for every role? Let us know!
00:00 DM APOC v2 01:45 What is the APOC? 03:03 Sponsor - Nocturn - Discount Code TLDco 03:50 Biases 04:22 APOC Front Bag Updates 06:18 Included Molle Panel 07:16 Wing Molle updates 07:45 Soft + Hard Armor 09:39 APOC Rear Bag Updates 10:36 Cummerbund Updates + Belly Band 12:56 Shoulder Strap Updates 13:15 Pros and Cons 15:00 Final thoughts and ranking
AI Generated·May contain errors
Video Summary
AI Generated
The Defense Mechanisms APOC 2.0 is a versatile hybrid plate carrier designed for military, law enforcement, and civilian use. It uniquely supports both soft armor for fragmentation protection and hard plates for rifle-round defense. With a streamlined laser-cut design and several quality-of-life upgrades, it offers a balanced approach to ballistic protection and operational mobility.
Hey, what's up, Wizards?
Welcome back.
Now, today, we'll continue this huge pile of plate carrier reviews for you.
And I have for you today what I think is, you know, outside of Instagram and all the
marketing nonsense you get sold, what is one of the most practical plate carriers from
law enforcement to military to even prepared civilians?
And I'm honestly pretty excited to see all the new updates on this because it's a little
bit nuts what it can do and how it can do it all without stupid bungee lashing.
We also did a whole plate carrier series with a setup and sizing video along with a buyer's
guide.
Make sure to check those videos out if you want to know more about sizing your carrier
or if you're looking to purchase and kind of want to know my take on what I think are
the most important features or what you can save a little bit on and not worry too much
about.
But that updated do-everything carrier for literally anything is the all-new Defense
Mechanisms APOC 2.0.
Now we already did a whole review of the APOC with like all the tests and all the things
and I'll link to that also up here and down the description.
So today we're mostly going to go over all of the updates and all the changes, but you
can look at that video if you want to see all the different details and all the tests.
I'll tell you, though, if you saw the MAPC 2.0 video, it's it's a lot of the same updates,
but they did.
I will pause here.
They did sneak some super unique stuff into the APOC version, too, that I do think you're
going to want to see.
Kind of like I always do before we get too far into it, though.
Let me explain what the APOC is and why it's a little bit special in case you missed that
review or this is the first time you've ever seen this thing.
The APOC is a hybrid carrier that takes both soft and hard armor, allowing you to have
a lightweight vest.
You can up armor in a moment, giving you additional areas of protection from small arms or frag
or then add in hard plates for protection from larger rounds.
The APOC gives a lot of creature comfort also, like a removable belly band that users can
just swap out.
I didn't really know this, but a lot of LE carriers use that belly band style.
But what sucks about it is if that $10 piece of elastic like that piece is usually integrated
into your carrier.
So if that little piece wears out, well, now your whole carrier's trash.
Kind of the cool thing with the APOC is that defense mechanisms makes all those companies
look like a bunch of idiots by just giving you a belly band you can remove and replace.
So if it wears out, you just buy a new one and swap it out for like 20, 30 bucks.
Super simple.
Looking more at the events around the world, it really does seem like having a carrier
that can do both frag and up armor for projectiles like rifle rounds is far more versatile.
So it may be more applicable to pretty much all of us.
It's pretty wild.
We'll tear into it.
I'll show you why you may like it.
But first, let's do some sponsor talk.
Today's video is sponsored by Nocturne Industries.
Nocturne brings the next generation of night vision with the all new panoramic Chimera,
bringing you an upgraded blended image with the rear RPO truncated glass and robust housing
that uses standard 18 millimeter tubes, allowing you to use any standard illuminator you want.
The Chimera allows you to literally see and do more than ever before.
So from the new user to the operational professional, Nocturne Industries has you covered.
Not going to lie to you, the Chimera is probably the coolest thing we've ever got to play with
on this channel.
And we're going to be showing you guys the new Talon housing soon.
So stay tuned for that.
And as always, you can use discount code TLDCO over on the Nocturne website to save a ton
because night vision is expensive.
All right, let's do this next part fast because nobody cares.
Defense Mechanisms did send us this APOC 2.0 to review and show to all of you.
We also have a discount code with them where we can save you guys a bunch of money.
And we've worked with those guys for a super long time.
So know that I definitely have some biases, so don't take anything that I say or any other
YouTuber says as gospel.
We're all biased in some way.
And remember that nobody's out there going and recording and editing for a week all for
free.
So that should make you ask some hard questions, do your own research, so you can be the most
educated consumer.
All right.
Looking first at the front bag, we again see some updates similar to the MAPC 3.0 with
the all new laser cut front to give the whole carrier that lower profile streamlined look.
There is still the same name tape area that fits standard sizes perfectly and the admin
pocket directly below it for papers and documentation.
I've commented on how I don't really use this from a military perspective, but I think from
an LE or prepared civilian, this admin pocket is going to be a lot more useful for maps
or just basic documentation.
And having soft armor in here makes this pocket a whole lot easier to get to.
So yeah, like I said, a whole bunch more.
The loop area was optimized to work better with standard agency markers with additional
MOLLE slots moving down like we saw with the other DM updates.
Along the side, we also see the badge holder is now standard and uses Tegris reinforcement
to keep it held in place, which just looks a whole lot better with it locked in there.
DM also makes all the patches we're showing you today.
So if you want to get some custom patches made, you can get them made when you order
the carrier and you can get them done in whatever color you want and they don't censor
anything so you can get literally anything you want on there.
I should probably get some made and give them away like wizard patches or something or just
swear words.
You guys let me know.
Now, the horizontal flaps still flow all the way from the top of the bag to give you a
very high connection to whatever placards you could possibly find.
Like the new MAPC, the straps are also upgraded from webbing to give you more color options
and a lower profile.
You can use this horizontal MOLLE strap to connect in like rear bags along the top or
PTTs on the middle or different sized placards.
The whole thing is just super versatile, what is just a horizontal strap of MOLLE.
There's no proprietary panel, no weird long process to connect it all together.
It's just a smart way to connect your gear in.
Now when you buy, the APOC MOLLE placard is now included with both quads and buckles and
letting you MOLLE in legacy pouches or use some of the more advanced quick swap placard
systems.
Now, DM did say they wanted to make sure to include that MOLLE panel to make it easier
for customers.
Like when you buy the APOC, you have all the bits you need to get up and running, make
it easier for departments or whoever is using it to just get started instead of having to
go find all these little pieces.
So I like that they did that and simplified the whole thing.
I personally like the customization of placards over just using standard MOLLE.
But I love that they give you the option, like I can use whichever of those I want to
do.
Plus you have everything you need right out of the gate, which I think is the most important
piece here.
Now under the panel is just a large loop field.
There's no MOLLE under here, but it's kind of moot since they gave you the whole MOLLE
panel instead.
Plus I'll show you how the placard lock would get in the way of any MOLLE underneath there
anyway.
So the panel is definitely the smarter move here.
But we can still connect in lower tourniquet pouches and normally I would connect in side
wings, but the wings of the APOC V2 have a nice addition with the MOLLE here for mags
or radios or whatever.
Now I like this a whole lot, but I will mention like we said in our buyer's guide that when
the cummerbund is connected into the placard instead of the carrier, it creates this pocket
and I think that would work a whole lot better, particularly in this scenario to give you
more room for when you connect MOLLE items into here.
You'd have that natural space for all that to fall.
So yeah, if I had a vote in any of this, I would find a way to connect this cummerbund
into this placard so that this space is more usable.
But hey, that's just me.
Now along the bottom there are two zippered areas.
The first is for our bulks cut armor that sits close to the body so it can wrap around
you.
I don't have that, so we'll use our Shaw Concept soft armor we have for our ARC V2.
Now, yeah, it's not the correct bulks fit and you can see that, but I just want to give
you an example of how that soft armor works when you put it into this plate carrier.
I did order the correct bulks armor and that's kind of why this video is late because after
like three months of waiting, I just gave up and stopped caring and this is what we
got.
Now DM also sells some other soft armor cuts like for Onyx, so hit them up if you want
a specialty cut as they'd be the best ones to direct you on what is what.
Don't ask me.
I do get asked a ton about what I think is actually a bit of stealth marketing.
Always like, does the safe life armor fit?
And it's always a weird question because that armor is kind of weird.
It's a proprietary cut, so my answer is probably in every scenario, probably not.
It probably doesn't fit and I would recommend you just buy better stuff.
Now in the hard armor pocket though, we see a large area to accommodate any size, place,
or thickness with a retention strap to hold those various size plates in place and move
the center of gravity upward.
Like with the buyer's guide, this is what we want to see.
You have to have one of two situations.
One, either the bag fits the plates exactly and in this scenario, that wouldn't really
work.
You'd want to have some different sizes, different patrol or military or civilians
can use.
So instead of that, they give you a large pocket with the retention to hold it all in
place.
Very, very, very smart.
Good job guys.
Now moving to the rear of the front bag, no huge changes here with the same mesh material
that was on the previous version.
Flipping over to the back, we see a solid upgrade over the previous APOC with MOLLE
along the entire rear panel instead of the previous alternating strips.
You also have more MOLLE along the side edges.
The loop area is also upgraded to a full panel so it'll hold your agency markers a ton
better like we saw on the front.
Now, lifting up the rear flap, we see an absolutely massive area to connect in whatever
cummerbund you want here.
This is okay.
It's kind of ridiculous, but I'm sure they have some sort of reason.
Along the bottom, we have the same two zipper styles to put our soft armor in the large
slot and then we have the same universal size for hard armor with the internal strap.
Again, so far, smart, smart, smart.
Then on the inside of the rear bag is again the same mesh with no changes here.
Hooking the cummerbund in on both the front and the rear, you also have this locking tab
to secure everything in place for added security so nothing can ever come loose in a tussle.
Now, the cummerbund has seen some updates, now lowering down from seven inches to a five
inch size.
From what I understand, this is from direct feedback from the consumers of the original
APOC that the seven panel like the seven MOLLE one dug into people's side and wasn't nearly
as comfortable.
So kudos to DM for listening to that feedback and making the five MOLLE panel version.
I do think it's a good bit better and I don't think I'm missing out on anything by not having
the seven.
So yeah, this is better.
The cummerbund was also given a bit of additional length to prevent the loop from sticking out
the back when it's used at the maximum sizes.
The cummerbund also has nice elastic stretch built into the rear so your chest can expand
if you're running around.
The two front MOLLE slots are also Tegra 3 reinforced, but the rest is not as the area
underneath is designed to take a six by six side armor plate.
DM gives users flexibility to place the side armor further forward or further back along
the side.
As I'm using this too, the whole thing just seems well thought out.
Like on initial glance, I was like, man, I probably would have wanted to have that solid
Tegra's panel go the entire length of the cummerbund.
But then once I put the side panels in there, I was like, no, that's not the case.
They would definitely get in the way and adding in the side armor.
It makes sense to have the front Tegra's whole thing.
The whole thing just seems like a unified smart concept.
I think it's worthwhile to note that mission dictates gear though.
So if you're doing some sort of setup where you're carrying around all your life belongings,
you may want to have more structural support to do that.
But if you want maximum protection, I think this is the way to go.
You can also get the cummerbund without the integrated pocket if you want to attach your
own system here.
The cummerbund connects in using first-spear QDs into the front panels that also have the
extra security flap to lock it in place.
Same as the original, but the tubes on the new APOC are definitely easier to get to as
they're a bit more exposed and easier to connect in.
Included also is the belly band we mentioned.
This helps a ton to keep the whole system secure and prevent the carrier from bouncing
around with all this weight when you're running around or doing something crazy.
The belly band can also just be removed if you completely hate it or it can be swapped
out if you damage it and need to replace it.
So you have a ton of options here and I think that's what it's really all about.
So you can do whichever you want to do.
The only thing we have left is the shoulder straps and here we see those same horizontal
straps added in from the new MEPC so you can connect in rear bags further up the shoulders
or route hydration through this area.
That's the whole carrier and all the new features on it.
So after taking some time to play with it and get to wear it, let me go over some of
my pros and cons.
And the first big pro I want to talk about kind of the same as the MEPC, the upgraded
look and functionality.
The laser cut MOLLE brings a cleaner, lower profile look while also giving a better connection
to agency markers or hook and loop panels.
The badge area is just a better design and the full rear MOLLE gives users a ton more
options.
You have what looks like a lot of small tweaks, but when you connect them all together and
use them all on one carrier, it makes for a far, far better experience.
All right, the next big pro I have is just more of the same, I think with me really,
really loving the expansion and yeah, those quality of life upgrades.
Having MOLLE on the side wings means you can direct connect radios and mags here.
The 5-inch cummerbund is less cumbersome and overall easier to use with the better front
QD design, along with the MOLLE panel being included straight out of the gate.
I also love how you can place the side panels in wherever you actually want either further
to the rear or further to the front.
You have a whole lot of control there.
It's just really, really cool they thought of that.
Now that everything that's pro should have cons.
I'll be completely honest with you.
I'm struggling to find something here that I just want to bitch about.
I guess I would like to see a shoulder pad system here.
For when you have both layers of armor and mags and such.
I don't think it would hurt the APOC at all.
It would be cool to have that kind of option if you're going to up armor all the way.
But these shoulder pads are a little bit wider.
So it does a pretty good job of taking the load off you already.
Uh, another negative.
Oh, oh, I mentioned earlier, I wish that the cummerbund connected into the placard.
When they do that, I definitely get credit for that.
But with all that going over it all talking about my pros and cons.
What are my final thoughts about this carrier?
The DM APOC is just solid.
And the new 2.0 version just takes the whole thing up a notch.
With a dedicated end user focus.
Giving options for soft armor, hard armor, placards, full laser cut MOLLE panels.
All in a sleek design.
DM is out here showing folks why hybrid carriers are the future.
And for that reason, I give the new APOC V2 a solid S rating.
And yeah, I've kind of done a lot of reviews about normal,
like standard military style plate carriers.
But the more I look at the world and the more I look at this carrier.
I think this is far more applicable, particularly for a prepared civilian.
To have both, you know, that additional level of protection and you can up armor it.
It's pretty smart guys.
And even the more I think about it.
It's even more applicable for LE so they can up armor,
but still have the extra, you know, projectile protection.
And even for military where they can always protect themselves from rifle rounds.
But then add that additional frag protection.
So really from every role that I'm starting to think about.
This is more applicable than a lot of the systems that I've been using.
So yeah, I think looking at it again.
It just reminded me that the APOC is just a solid pick.
So thumbs up to the guys over at DM for thinking this through.
Everything's smart.
Now I've also been gathering up a ton more carriers to do
just a million plate carrier reviews for some reason.
But I want to review what you guys want to see.
So make sure to sound up in the comments.
I'll read them all.
I usually try to respond to everything.
I'll go grab what you guys say if I can.
Some of this stuff is not in stock, but I'm trying to get it.
And yes, yes, we're going to do the LV-120.
I'm just waiting for them to ever actually sell multicam.
I just don't want to review it in stupid coyote.
I don't want that one.
But I hope this review of the DM APOC V2 was helpful in your purchasing decision.
I want to say thanks to all of our Patreon supporters and our YouTube members.
You guys make it possible.
We can get these carriers in, test them out and show them off to you
and see where you can save some money
or where you may want to splurge to get something a little bit better.
I think this one's definitely worth it for the application that it has.
And I want to say thanks to everyone that likes, comments, and subscribes.
Comment down below what you think about this carrier
and what you think about whatever favorite one you have.
I want to hear about it because I want to grab it.
I want to review it.
All right, everyone.
I want to see more hybrids.
I think I do have another one coming.
So we're going to see more hybrid carriers.
But I would like to hear from you guys
if there are particularly hybrid carriers that can do soft and hard armor.
Like you can up armor them like this one.
I do want to hear about it because I want to do more of those.
I think this is where people should be looking.
I think it's more practical.
It makes a lot more sense than just minimalistic carriers
that only cover, you know, this part.
Maybe I'm crazy.
You guys let me know.
All right.
It is gorgeous out.
So I'm going to go get some vitamin D.
All right.
Later, guys.