Compared Dewalt Vs Viking Construction Jack

The Tech Toolbox
1 follower
COMPARED Dewalt vs Viking construction Jack
This is a comprehensive comparison of the DeWalt construction Jack with the extension arm with the Viking Arm aka construction Jack with the extension arm also known as the cabinet installation kit.
#machine #tools #Powertools
AI Generated·May contain errors
Hey guys, it's Al with Tech Made Easy,
and here they are, the construction jacks.
Now, some might call these cabinet jacks, by the way.
To the right, we've got the DeWalt construction jack,
and to the left, we've got the Viking Arm, as it's called.
Now, as you can see, they both have extension arms.
In this video, my goal is to take a close look
at both of these, right?
We want to compare their features
because these can really be very helpful.
So, you know what?
Let's go ahead and check this out.
Okay, so I'm gonna have links in the video description
for these products, but let's go ahead
and just go over some pricing and other information,
and then we're definitely gonna take a close look
at these two.
So, the Viking jack is $129,
and the DeWalt jack is $99.
Now, the extension arm for the Viking,
which they call a cabinet installation kit, by the way,
is $59 each, and the DeWalt is $49 each.
One thing to mention, the Viking,
when you buy the actual extension arm,
comes with the pad set.
The DeWalt only comes with one piece of the pad,
which we'll go over in a little while.
The rest of it has to be ordered for about $10 to $20,
depending on where you get these.
Now, let's talk about weight capacity.
So, we're gonna start off with the jacks by themselves.
We're not gonna talk about extension arms for a moment.
So, the Viking has a 330 pound
or 150 kilogram weight capacity for the jack.
DeWalt is 340 pounds or 154 kilogram,
again, just for the jack.
Now, here's where this becomes very interesting.
So, Viking says if you add the extension arm onto the jack,
you are now limited to 110 pounds
because the arm can only support 110 pounds.
Now, for cabinetry, that might not be an issue,
but DeWalt's extension arm
keeps the 340 pound weight capacity.
That's pretty nice.
Now, concerning the jack itself
and its maximum lifting height, right?
So, the Viking can go to 8.46 inches
and the DeWalt goes a little higher at 8.75 inches.
Now, this changes drastically
when you add the extension arms.
Now, with Viking, you can go from a minimum of 9.5 inches
to 23.7 inches.
Now, with the DeWalt, once you add the extension arm,
the minimum is 12 inches all the way up to 27 inches.
So, this can go higher, by the way,
but this can start off lower.
It depends on what really works for you.
Now, let's talk about material.
We'll start off with the jack.
So, the jack on the Viking is mostly metal, by the way,
and the jack on the DeWalt is mostly metal.
It's got some plastic, but it is mostly metal.
So, that's good news.
Now, let's talk about the actual extension arm.
So, Viking's is a fiberglass P-A-T-P-E.
I'll put that up on the screen.
And the DeWalt is actually mostly metal with some plastic.
That's what makes it strong enough to hold that 340 pounds
with the actual extension arm.
Now, concerning levels of extension,
the DeWalt has three levels of extension
with the extension arm,
and the Viking has three levels also.
I'm gonna be honest with you, though.
When I show you this later on,
you're gonna see that the DeWalt is a lot easier
to actually adjust.
With the Viking, it's got these plastic pins
that are just a pain.
And again, I'm just being real with you guys.
Now, let's talk about weight.
So, the jack for the Viking is 3.1 pounds,
and the extension arm is 1.63 pounds.
So, you're talking a total of 4.73 pounds.
Definitely lighter and definitely more compact, right?
I mean, this is really, even if you take off the arm,
this is really very compact.
Now, when we look at DeWalt,
the jack is 7.03 pounds,
and the extension arm is 2.65 pounds.
We're talking a total of 9.68 pounds,
which is almost double, right?
But that's because there's more metal here.
As far as warranty is concerned,
on Viking, the jack itself has a limited lifetime warranty,
and the extension arm comes with a two-year warranty.
Now, when it comes to DeWalt,
both of these have a limited lifetime warranty.
Something to be aware of if you pick any of these two up.
So, the DeWalt jack and extension arm
come ready to use out of the box.
Now, the Viking, the extension arm,
ready to use out of the box,
honestly a little difficult,
and we'll show you that in a little while.
But the actual jack does require assembly.
Let me go ahead and show you some video
so you can actually see the parts
and what has to be put together.
One thing you'll see is the Viking
does require some assembly.
It obviously doesn't have the bottom pieces on.
So, you've got to put this on, on here,
and then you've got to take these two
and put them on each side.
And they give you the screws, they're Allen key.
So, real simple, they're really not hard to put together.
Seems like it's made well so far.
So, as you could say, I put the top two on.
Very easy, you can't put it on wrong.
And then I have to put on this plate and I'll be done.
There she goes, all assembled.
So, I put these on first, I put that on last,
and you're all set and ready to rock and roll.
And then you've got an extra screw they give you.
Some other things to be aware of.
So, the Vikings definitely got a smaller footprint.
Forget about the extension arm for a minute.
But, you know, when you talk about these pieces here
and obviously how compact their handle is and really strong,
they did a good job there.
It's definitely a smaller footprint.
Now, DeWalt actually has an integrated lumber cradle.
Let me pull up some video and show you what that looks like.
So, I'm going to take this off for a minute
because you have an integrated
two-by-four lumber cradle here, right?
So, for instance, if I wanted to put some wood on this thing,
again, we'll do something with the camera here,
but we crack these guys open, hold it open,
and we put our two-by-four in place.
So, you know, this can come in handy.
Now, you can actually screw it in if you need to.
As you can see, it does have screw holes,
but it holds it very well.
So, you do have that.
Not bad, huh?
I mean, that can come in handy.
Now, these both have holes on the bottom.
So, if you need to actually drill these in,
and again, we're going to take closer looks at this stuff.
Obviously, the DeWalt's actually got, you know,
more options for back and front,
but you can drill these down if you need to.
Now, the other thing that really is a big difference
between these two is this one you have to use your hand,
and this one you can actually use your foot
to actually raise it.
Again, we're going to show you that in a moment.
As far as where these are made,
the Viking is made in Norway,
and the DeWalt is made in Taiwan.
When it comes to jack maximum lifting height,
the Viking is 8.46 inches,
and the DeWalt is 8.75 inches.
Really not a big difference there,
but let me show you how to quickly lower these
or obviously raise them.
So, the DeWalt's got this button up top.
Be careful.
Don't use this, especially if you have weight on the jack.
Don't use this.
You're going to want to use this button
that's going to slowly lower the jack.
But if nothing's on the jack
and you want to make a quick adjustment,
push this button in,
and you take it and lower it all the way
or raise it to where you want it to be.
Now, let's take a look at the Viking.
Now, as I do this test,
I realize that the DeWalt is definitely a lot more stable
than the Viking if you're just putting it down somewhere.
You know, it's a little heavy back here.
But this is the button that you would use
if you just wanted to lower it all the way
or you would want to raise it.
Again, that's the button right there on the right side.
So, they both have that feature.
That's nice.
So, one of the things I really like about the DeWalt
is you can actually use your foot here
because the Viking, in order to obviously raise it,
you actually have to use the bottom portion here.
So, it doesn't give you an option to actually use your foot.
Whereas with the DeWalt, as you can see,
I can use my foot or my hand to raise that.
That's really important.
And again, if I want to lower it,
I just press this slowly when I have weight on it
or I hold the black button
and I push this to where I want it to be.
So again, don't use that button if you have weight on it.
You would use this button.
But really love that I can use my hand or my foot.
Taking a closer look at the Viking again,
I want to raise it.
I use this.
I want to lower it slowly.
I use this one button right here
and it just lowers it really slowly.
And if I want to make a major adjustment
with no weight on it,
I use the right and I can go up or down.
So, just to show you how these work
as far as the buttons are concerned.
Now, as far as screw holes, again, stability,
DeWalt's got two in the back, two in the front,
and Viking's got one in the front and two in the back.
Earlier, I had talked about this
and thought it was only here,
but you actually have three.
If you need to screw these down,
some people might need to screw these down
so that they're screwed into something
and then they can actually use them
the way they want to use them.
Let's spend some time going over these extension arms
or as Viking calls theirs, a cabinet installation kit.
So, I'm going to start off with a DeWalt, all right?
So, with a DeWalt, you've got your opening here
and what's going to happen is that's going to allow you
to insert this on the top, slide it down,
and then on the bottom, you're going to press these two
and it's going to lock in place.
That is now going to give it the stability
to hold 340 pounds.
Now, this is the pad that's included.
So, they do give you one pad
because if you're lifting cabinets,
you want a nice, smooth surface.
This does come off, by the way.
And that's mainly because,
let's say you want to put a piece of lumber on this,
you can put it on, you can even screw it on.
So, that comes with the DeWalt, all right?
Lifting the DeWalt is pretty easy.
All you have to do is hit both of these releases
for the lock and it's got three levels of extension.
This is the first, that's the second,
and that is the third.
All right, again, maximum height on this,
I'll put on the screen for you,
but really nice that you can get up that high.
And again, now that it's on here, right?
I can jack this up using my foot.
If I've got weight,
I can slowly lower this down using my thumb.
If I don't have weight and I want to make a quick adjustment,
press the black button here.
Let me lower this,
because visually I just want you to see
as much as possible.
But the black button, again,
is going to allow you to just make those quick adjustments.
You know, again, lifting, lowering.
So, there you go.
Again, you've got the two lock adjustments here
on the metal.
You've got the two on the bottom
and you've got the three lifting heights.
Really nice, no assembly,
comes together when you need it and you need to use it.
Spending some time with the Viking, right?
So, one thing I don't like is these are a pain.
You have to put these in and pull them out.
They're a pain.
They really are.
I had this a little loose just because of this demonstration
but I just, I don't know.
I mean, don't get me wrong.
I mean, it's fiberglass.
It's pretty darn strong.
To tell you the truth, it isn't as strong
mainly because it has 110 pound, you know,
lifting capacity as far as weight's concerned.
But let me show you some things that are interesting.
So, first of all, they do give you the pad set.
So, you take this off the top
and you can put this right here on the bottom
so you're not scratching anything.
So, this does come.
So, there you go.
You now have your bottom,
which you don't get with the DeWalt.
You have to buy separate.
All right, number one.
Number two, let's say you want to put something here.
Well, you get that.
It's actually here.
It's actually hidden.
So, this piece here, you take it, you slide it down
and now you actually have something small
that you can put here that, you know, is going to be gentle
depending on what you're lifting.
So, you do get that.
And then obviously your top already has a pad.
So, you know, you get your bottom pad.
You get an extra one that goes like this
and then you get the one for the top.
So, I like that.
Now, if you're wondering where this goes,
well, again, you take it off of there.
Open this up.
Make sure you release your pin.
You put this here
and that will basically be its resting place.
Don't forget the bottom one slides right on top
and then you can put it away
or you can just keep this assembled.
So, as you could see,
the extension arm does have three spots for extension.
You've got the original,
you've got one more here
and then you've got one more here.
Again, the pain is when you get ready
to put this in its hole.
You then have to take this peg
and it looks like they give you two of them.
Oh man, this is fun.
And you could see here what this is made of.
It's a really thick plastic,
but this is fun.
So fun that I'm not gonna put it in all the way.
Oh man.
All right, but that's what you need to do
when you need to adjust the extension arm.
So, I wanted to show you that.
It was pretty interesting.
So, you're wondering,
how do you put the extension arm on the jack?
Not hard at all, to be honest.
You've got two areas here.
So, you see this spot here,
that is gonna go down here.
And then these two are going to pretty much
just slide down the sides and sit on here.
Real easy to put on and real easy to take off,
as you can see.
Now, the fun begins when you actually want to extend this,
because now you've got to use this piece of plastic
and that's a pain in the you know what.
So, you could see with the extension arms on,
this here is nine and a half inches
and this is 12 inches minimum, right?
I'm gonna go ahead and put both of these up
so you can see how high they are.
Now, I pulled all the way out to show you
before the actual extension arms are extended fully.
We've got 17 inches here and 21 inches here
before we extend the extension arms.
I am fully extended now.
That means the jacks and the extension arms,
and I am getting 22 and a half inches
in height with the Viking
and 27 and a half inches in total height for the DeWalt.
So, there you go, guys.
Just a good look.
One more thing I want to point out
that I thought was obvious,
but at the end of the day,
sometimes, you know, it's important to point things out.
I do like that everything is encompassed
into this here with the DeWalt.
So, there's really nothing exposed.
Now, the way Viking built this, you know,
I mean, obviously, everything is exposed,
but what if you get dirt in here?
What if you get dust in here, you know,
and it obviously affects the mechanism?
I'm not sure, but I thought I would point that out.
All right, guys.
So, video is not sponsored.
Keep in mind, picked this up on my own dime.
I wanted to see these two compared.
I hope the information helped you.
I hope you hit like.
I hope you hit hype and subscribe, and thank you, guys.
All right, guys.
Well, thank you so much for watching our video.
I sure hope you found it helpful,
and if you did, give us a thumbs up.
We'd appreciate that.
I'm going to go ahead and put our social media up on top
if you want to follow us,
and you'll be able to subscribe to our channel
by clicking this round Tech Made Easy logo.
Guys, thank you so much, and have a wonderful day.
