He kept this '53 F100 build a secret from his wife for 3 years. Trent Bloomfield from Findlay, Ohio drove down to GNF100 2026 in Pigeon Forge to show us the Coyote-swapped anniversary gift he pulled off without her ever finding out.
The truck started as a flathead three-on-the-tree driver Trent bought out of Michigan. Solid bones, just some rot around the radiator shroud and a bad spot on the fender. From there it became a full ground-up build with a Coyote 5.0, 10-speed transmission, Wilwood brakes, and Forgeline wheels.
The color story is what really sets this one apart. Trent's wife loved candy apple red, but it didn't play well with the caramel they wanted to work in. So they landed on a three-color palette — Ron Burgundy on the body, copper running through the rails, transmission cover, and engine bay details, and black chrome on the bumpers and shroud. Polished aluminum Forgeline wheels tie it together. The fenders got an inch-and-a-half spacer to widen the stance without going bubble butt.
Trent's builder Bill Spursey handled the fab work, and Foster Auto Body in Fremont, Ohio laid down the paint. A lot of the swap and finish parts came through us — Trent leaned on Spencer and Logan throughout the project to source the right radiator setup, headers, oil separator relocation, fuel system, and all the small stuff that makes a build feel finished.
If you're building a Coyote-swapped classic Ford, here's our full Coyote swap catalog: fatfender.com/collections/coyote-swap
Some of the FFG parts featured on Trent's truck:
53-56 BILLET DOOR HANDLES (Exterior): fatfender.com/products/ford-trucks-1953-1956-billet-aluminum-door-handles
53-60 BILLET DOOR HANDLES (Interior): fatfender.com/products/ffg-billet-aluminum-door-handles-1953-60-ford-trucks-copy
BILLET BED FUEL DOOR: fatfender.com/products/fat-fender-garage-wood-bed-billet-fuel-door
53-56 BILLET LED DOME LIGHT: fatfender.com/products/f100-billet-aluminum-led-dome-light
Trent Bloomfield from Findlay, Ohio, spent three and a half years building a custom 1953 F-100 as a surprise 20th-anniversary gift for his wife. The project transformed a well-preserved flathead truck into a high-performance masterpiece, blending classic aesthetics with modern power and a unique \"Ron Burgundy\" color scheme.
1953 F-100, Coyote motor, 10-speed transmission.
We actually built this for my wife
for our 20th anniversary.
So for three and a half years,
I kept this a surprise from her.
The Ron Burgundy, the copper, and then the black chrome.
It's now a Ferrari underneath
with a fat fender flare, right?
Yeah, I'm Trent Bloomfield from Findlay, Ohio.
My wife and I, we actually built this for my wife
for our 20th anniversary.
This was a surprise to her,
so this is something, a little appreciation
to show her what I love about her.
So 1953 F-100, we bought this truck
basically out of, in Michigan off of a gentleman.
We basically redid it all for Power Sports.
It was actually a great shape, actually.
The only thing that was really rotted out
was the, where the radiator sat down the shroud,
and there was just a little bad spot on the fender,
but this truck was perfect shape.
Now the older gentleman, it was a flathead,
three on the tree.
It was a beautiful truck then, flat black of all things,
but that was a fun little driver there,
but it's now a Ferrari underneath
and with a fat fender flare, right?
Coyote motor, 10-speed transmission,
Wildwood brakes, all this stuff around it.
My guys at Fat Fender, I mean, I tell you what,
great partnership.
They helped us out with all the stuff we needed to do.
For my builder, Bill Sprossy, pick up the phone.
Logan and Spencer, they were always there to help us out.
So the engine bay, basically,
we bought a lot of stuff from Fat Fender,
everything from the radiators, the hoses,
the oil, changing the oil separator,
so moving it around so it wasn't hitting the frame.
They helped us out with getting the right headers
for the project.
We bought a lot through Fat Fender,
just from a standpoint of helping us
through the process of fit and finish.
It just helped our project out.
So going down through the truck, mirrors, door handles,
knobs, I mean, everything you can think of,
the dome lights, gas tank, the sensors,
everything you need for the fuel system,
the digital Dakota dash.
So yeah, all the stuff from Fat Fender
really helped us out with making the project go smoothly.
Yeah, this is our beauty.
Start to finish, it was about three and a half years.
I definitely want to give a shout out to our paint guy
in Fremont, Ohio, Bobby Foster.
They did a great job there at Foster Auto Body
in Fremont, Ohio.
This is definitely a one-of-a-kind truck,
very special to us.
But as you can see, some of the truck details,
we had three colors.
The nickname of the color is Ron Burgundy.
We had copper, but we wanted to stick with the rails.
As you can see, the rails down below,
it falls in with the cover over the transmission
and then also through the details of the motor engine bay
with the copper.
But the inspiration was,
her favorite color was Candy Apple Red,
but with the Candy Apple Red and the Caramel color,
it just didn't go good.
And with the guys at Foster and my buddy, Bill Sprossy,
the builder, we all came together
and we matched these colors to go good with each other.
Oh yeah, so, oh yeah, yeah, yeah.
The chrome is kinda crazy.
So Advanced Plating here in Tennessee did the shroud
and the bumpers on both the front and back.
Definitely a touch that we wanted to add to it.
And so, like I said, our color scheme,
the Ron Burgundy, the copper, and then the black chrome.
And then we did the flat back and the engine bay, right?
I mean, we just wanted it to be where the motor
looked like it was just its own little work of art
on a canvas, right?
So yeah, so the bed liner, basically bed-in stuff,
where we used the black walnut, Cerakoted the strips.
And I always say this, this is the smallest little thing,
fat fender's door.
I mean, getting into the gas tank.
I mean, this is little things to little latches
for our doors, make it slick, sexy.
And then everybody questions, where's the taillights at?
These little taillights, they're just little guys, right?
So we didn't want nothing to stick out like crazy.
Yeah, I mean, we tucked a little of the bumpers
in front and back.
My biggest thing, my wife always said
when we go to car shows, if we ever build a car,
was I still want it to look like a truck.
They didn't make this in 1953, but in 2025, they did.
Forged line rims and wheels,
polished aluminum on the outside, the fenders.
I mean, we basically, there's about an inch and a half
spacer that was put in to widen it out,
but not make that bubble butt,
but still flow line with the lines.
Yeah, like I said, the truck, I still in awe
and it's almost a year and a half later,
two years later almost.
Every time you look at this truck,
you find something even more wow factor.
It's a beautiful truck, I love it.
So my wife, this was a 20th anniversary gift surprise.
So for three and a half years,
I kept this a surprise from her.
It was actually the last day
when we were getting ready to unveil,
she kind of knew something was going on
and just everybody had a little bit of touch to it, right?
So I'm super excited to even just be here
and it's also just awesome, a gift to give my wife,
just to show her my appreciation and my love for her.
So I know everybody says, man, this truck is lovely, sexy.
Hey, that's what I think about my wife, right?
So just making sure the details are right,
but actually just little things.
And I would say, usually you guys as examples
of helping us out,
stuff that maybe just didn't fit the right way.
We picked up the phone, called Spencer, Logan, right?
I always give a shout out to those guys.
They helped us out.
They said, hey, you know, what can we do?
Tell them the problem.
And if they didn't have the answers,
they got to their vendors.
I know the wheel at the last minute,
we couldn't find anybody to wrap the leather.
They helped us out, got the wheel wrapped.
And that was a big, big thing
because we couldn't find anybody to do it.
And we were giving this truck to my wife in July of 2025.
I think it was April when we had to call Spencer and Logan
and say, hey, we need help, right?
So we got it done, turned around and it's able to drive.
We have about 300 miles on it now.
So we didn't build it to be a trailer queen.
I think Logan said it the best or Spencer,
I can't remember, but the truck was executed.
And I think that was probably the best word, executed.
Everybody did a great job from the builder, the painter
and to our vendors and Fat Fender Man,
just once again, appreciate everything you guys do.
One thing I didn't share underneath the vehicle too
is it does have the kindigit cutout.
So when she sits at the red light
and she wants to know people that she's got something,
she cranks it open and it's pretty loud.
So I wish I could start it up here for you guys
just so you can hear it.
Cause it is, I think I saw a sticker.
It's a panty dropper.