PLC & HMI Wiring & Programming अब सीखना है आसान – शुरुआत करें आज से अगर आप Electrical या Automation Field में career बनाना चाहते हैं, तो ये PLC & HMI Wiring और Programming course आपके लिए perfect है! इस कोर्स में आप सीखेंगे:
✅ PLC का Basic से लेकर Practical Programming ✅ Input-Output Wiring का सही तरीका ✅ HMI (Human Machine Interface) की समझ और Connection ✅ Real-Time Examples और Simulation ✅ सभी topics आसान भाषा में, Step-by-Step समझाए गए हैं – No Prior Experience Needed!
चाहे आप एक Electrician हों, Engineer या Beginner – इस course को करने के बाद आप confidently PLC और HMI Systems से काम कर पाएंगे।
🎯 जो सीखना चाहते हैं Real Automation Work – उनके लिए ये course एकदम सही मौका है! तो अब इंतज़ार कैसा? Aaj Se Shuru Karo Apna Learning Journey!
This guide explains how to wire and program a Delta PLC to control a motor's forward and reverse directions. It covers the entire process from hardware power setup and input/output wiring to ladder logic programming in WPLsoft, simulation, and real-time troubleshooting, emphasizing that industrial automation is accessible to all skill levels.
Friends, if you feel that wiring a panel using the PLC that exists is extremely difficult.
If someone says to you, "Go ahead and program a PLC," and you feel that only supervisors, senior personnel, or engineers are capable of doing PLC programming.
They can do it, we cannot, so perhaps you are mistaken here.
Because the PLC we use has wiring and programming that are so easy
That you will start doing PLC wiring and programming right from today after watching this video.
As you can see here, I have a motor right here.
And here, the complete PLC wiring for this motor has been done.
I have written a program together with my companion.
What will be programmed here?
This motor needs me to press this button to start.
The motor will start running forward here.
Now if I have to make a motor run
So, this stop button here, I'll just press it.
The motor will turn off here.
Now, if I want to run this motor in the reverse direction
So I'll have to press just this button.
As soon as you press it
The motor道士 will change direction here.
So in today's class, I will teach you exactly this.
that finally how we
To drive a motor in the reverse forward direction
We will wire the entire PLC panel.
And how exactly will we do programming here?
As you will see
Here I have a PLC from Delta Company.
Using this PLC, these two contactors must be turned on.
To keep it running
The contactor has power wiring.
Just as we start a motor
Power wiring is done in the contactor.
reverse forward ones
You will have to do the same power wiring here.
I won't explain the power wiring to you.
We do the control wiring here.
So for control wiring
I have a DC power supply here.
In this DC power supply
Bring both positive and negative
I'll connect with MCB
MCB after receiving power
When I turn it on
So the power supply that will go through this
That power supply is for our PLC.
You must connect it to the positive terminal.
And right next to it
Here is the terminal at zero volts.
Here at this terminal
negative power supply that is to be taken away
It will have to be connected.
Now, look right next to this one.
There is also a symbol for earthing here.
So, whenever you get the symbol for earthing
Understood. The earthing you have
We have now provided the auxiliary power supply.
Now we have to deal with this.
Its control wiring
The control wiring will be done in two ways.
There will be wiring for the input.
The wiring for the output will be one.
So first of all, the wiring of the input which is
They understand him.
To wire the input as shown
Here you will have a push button.
There will be a stop button.
The second one will be forward
And the third one here will be the reverse push button.
I am not installing an overload relay here.
You can attach it to him if you want to.
The method will become clear to you right here.
Now, this push button here
We will have to supply incoming power to them.
So, the PLC we have
mostly the PLCs to which we supply power
That is our DC power.
At this moment
The positive power supply we received from the MCB
Take a wire from the same positive power supply
We will supply power to the stop button.
The same way as our forward and reverse
We will also provide a private power supply for them here.
Now, this push button of ours
They need to send a signal to the PLC.
Meaning of signal in PLC
The input terminal you will receive
A little bit of the example
If you look at the PLC
So in that PLC, you have it there
Input terminals of this type, X0, X1, X2, are available
If X is written
And if a written "Y" is found
So you understand, that is our output terminal.
What is in the input?
The one that is our push button
You need to connect them.
And the output that is obtained
Take the power supply to him.
Whoever we need to keep running
He will have to provide power.
So right now in time
We will get the input terminal right here.
X0, X1, X2, X3 of this type
So right now we have
for wiring
Three push buttons
There are three inputs.
So the first one is the stop button
I'll take it.
And take it away
Here is X0
I'll connect with him.
Now, regarding the forward push button here
Take it away
I'll connect it with X1
And take it back
Here, X2 which is
I'll connect you with him.
I mean this push button
When we press it
So, the input terminal of the PLC
You must go there to get the signal.
We have already wired it.
Now let's look at this part.
This PLC, you know
In this PLC
Here you are
Another terminal is found
Written for you
It will be obtained as S upon S
This means
sync and source
So sync and source
That is to say
that you are here
control
What type of control does it have?
Are you here?
controlling which is
positive power supply
You want to do it
Or for negative
So right now, him
Don't go to the sync source
Now in a simple way
I'll tell you
If you are using a DC power supply
Using
You are wiring it up
So in it you
even more positive
You can wire it.
even from the negative
But mostly what is there
We are here right here.
positive power supply
Using
We wire.
So right now
What do you need to do?
that your
push button
The positive wire that he has
Take him away
Need to connect on input
But on the input
Only positive power supply
Giving
What is PLC
He won't be able to read it.
It won't be able to read the signal.
To make the signal read
The positive power supply for this is
You have to complete its circuit.
In the manner of an example
You have a bulb with you.
Do you want to turn on this bulb?
So you've just installed a switch here.
And with it
I connected a battery.
Of this type
So if you press the switch
So the power supply flows from here
It will return from here and go to this place.
But if I am here
I'll remove this negative power supply.
So, what will happen in this condition?
No matter how much I press it
No matter how much power you give to the bulb,
The bulb won't glow here.
Same way, your PLC that exists
Your signal has already gone to this PLC here.
Whose positive power supply signal has gone?
But here, the common terminal for this is
I mean the sink source terminal that exists
In it, you are here
A negative power supply will be required.
Then, when its circuit is complete
To complete the circuit
The negative power supply
A wire will be taken from there.
And the terminal with the sink source
We will connect you to that place.
That's all you need to do—wire the input terminal.
How easy it is
You've seen, that's all we need to do.
This PLC requires auxiliary power.
After that, our push button
and take the power supply from the push button
We will connect at the input terminal.
After that, the power supply we have
To have his circuit completed
At the sink source terminal, we have the negative power supply.
We will take him and connect him.
Now here is our PLC
This PLC's output terminal which is
Using this
We will have to keep the in-contactor turned on.
So, the PLC we have here
In this PLC, you will find here
A terminal of this type, C0, Y0, will be available
Then here you have C1, Y1
After that, terminals of the C2, Y2 type will be seen.
So, what does C mean commonly?
Got it, common
And Y means output
So, the power to be given on this common one
I mean, if I provide the phase supply here
Thus, this phase supply will be obtained here from this output.
And I can connect with anyone using this.
I mean, we'll have to supply power at the common terminal.
We will get the same power supply at the output.
And here in the PLC, there are separate common terminals.
As much C as there is, it is a different common terminal.
We have to provide the power supply to them.
So, what do we need to do right now?
That common terminal needs power supply.
So, the power supply that we will use here will be DC only.
So, the DC power supply here
I took a positive power supply from the same location.
And the first one, the common one, at the place with the C0
I've connected this wire.
Now below this, there is also C1 here.
Because I need to take two outputs here
What will be in it
that this is my first output here
C0's output to me
Here is the output of C0 for me
It will be available at Y0, and I'll get another one
I need an output that I can use for Y1
If I do it, the common thing that occurs is
It's C1.
So at C1, I also have the power supply here.
What needs to be provided
Now that you've connected this much
The power supply here
You need to take the contactor and connect it.
But what our PLC is
The output power that comes from this PLC
Directly contacted output
We do not connect via load.
We have a glass relay in the middle
Or the use of the relay card
do so that
The power supply we have is in the middle.
become isolated
The circuit of the PLC becomes separate, and that of the RLC as well.
circuit breaks and right now
The contactor I am using here
I'm doing it too, this contactor is mine as well.
Will work on AC power supply
So, from DC, I will operate the relay card.
And at the root of the relay card
I will turn on the contactor here.
That is the proper way.
For wiring a PLC
Turn on the direct load from your output
Don't put the relay card in the middle.
Will apply this for protection
It happens now in this relay card
Add minus one and plus one to you
The terminal will be available, this terminal
It happens, it ios, relay's
Which terminal of the coil?
Done in the same way second
For the relay, you need to be here
minus two and plus two
This will be obtained from this type. This is ours.
It will be for the second relay.
Alright, so with this type of approach, you
The terminal of the coil will be available in which one
You have to give power, thenSheriff
Where will the supply go from? So this
So, what will we do for this?
Y Zero, which is the first
When I first came to WY Zero
I want to turn on the relay. For this purpose
Take Y from Y zero to this positive
the first positive terminal on the terminal
I'll connect it there
The power supply will go from the second output.
But here
The connection that was made
It has been done positively.
I mean this relay's
If given positive on common
We will receive the power supply from this one's output.
So the positive power supply has been received by this relay.
But to turn on the relay
A negative power supply is also required.
So what will we do for this?
Which is our negative power supply
Take the negative power supply from the same point to the negative terminal of this relay.
Wherever negative is required, connect it there.
Now, using this relay, we need to turn on the contactor.
And the contactor will work on AC power supply here.
So, regarding this relay, the common terminal it has
I'll have to connect the face supply here.
And whatever will be here as ano
Take the power supply to him.
I will switch on the contactor here.
But the relay here
It is a terminal; if you look at it, you will see.
So here, you have
Now understand what this means
P stands for pole.
You can say that the meaning of the poll is
What is this common terminal of ours?
What does "ano" mean?
And "C" means NC
Now speak here, oh why
What is happening for this year?
So, just understand it here
There is nc nc in the ropes.
Then cut it like this
For nc written only as c
written for ano
So this detail here
This detail is written on our reel's upload.
That's what you need to use.
I mean the first one that will be released
I will use it.
For forward
And in this, the second relay that will take place
C2 O2 and P2
I will use it.
For second reels
So, what will we do to connect this?
The AC power supply that we will have
Now in this power supply
Which phase supply is it?
I'll bring that phase supply over.
And this common reel card of the one
Which one is common?
p2 and here p1
I williser power supply to both of them.
Now the power supply has been obtained for their common terminal.
What should be done about this now?
The output of this
Because we will control everything from the PLC
In the reel, you will always have to use the anode.
So, what is the common anode in this reel?
Take a wire from that anode.
And the reverse contactor we have here
The NC point of that reverse contactor
Connected there
And after that, its NC output is this
And connect to the A1 terminal of this contactor, the forward contactor.
I mean, the first reel when it turns on
So, the forward contactor needs to be turned on.
But in the middle, we are also installing interlocking here.
How was the interlocking installed?
Let me explain it to you once through a diagram.
Look, you have two contactors here.
What is a contactor here?
The one on the forward side, and the other one here is the reverse side.
Now, Malijie, here you have
There is a start push button for forward.
Here you have for reverse
And here you have a stop button, through which you will turn off the motor.
So, the power supply coming in must provide power to both starters from that stop; power must be supplied to both starters at the start.
If you press the Prex button, you'll hold both Pooch buttons in the palm and supply power here, and you'll be pleased with this type of operation.
But if Benchans presses either of the two buttons
Here, the contactor has just turned on, both of them.
In this condition, the reverse Ford contactor, which could be 100 circuit there
We are attaching the forward contactor here.
In the Nakiying circuit, we reverse here.
Niki, all these things are going to the Bronx, pulled by Pandath forward here.
Connected to terminal A1 of this connector
Now, in the same way, you are to do this here
You need to connect this reverse connector.
For this, the secant of this reel's outport is
A wire will be taken from that outlet.
and take the power supply from the ANSIE outlet
Our reverse contactor
We will provide power supply to its coil.
I mean the A1 terminal
We will connect the wire.
Now we just need to connect one wire here.
So, what will we do for this?
What we have here is our M3
Its neutral terminal here is
We will take one wire from this place.
And take this to the forward contactor.
Where the A2 terminal is
We'll connect it.
Similarly
The reverse contactor also needs to be neutral.
So from this neutral supply,
Loop a wire
We will also provide neutral supply.
So this is our
Reverse Forward Starter
What do you think?
This wiring is very difficult.
No, bro, it's way too urgent.
You see how easily it can be done
We've already wired it here.
What was done in it?
Push button
And same voice
Marriage
For Raeyankr's sake
That's all you need to wire.
Go to wire a certain V-bhail.
There affliction occurs on the PLC.
That is the process that needs to be followed.
Here we are
PLC programming
It needs to be done. The wiring I have indicated is the same wiring I have mentioned here.
I've practically done it, and at the same time, I've also indicated this.
I'll explain briefly in programming. Now about wiring
We must understand here exactly what PLC Panel is
How to program? Watch, programming too is for you
I'll explain it in a very simple way. You just speak.
Sir, I'm having so much fun. And definitely, a hundred percent in the comment box.
You'll say when you comment that there was no better way before this
I have never learned PLC wiring and programming.
I give you this guarantee. But regarding the PLC Panel,
Before programming, I need to give you a small piece of information
I want to. If you can handle the complete wiring and programming of PLC, HMI
I want to learn. From absolutely zero level to advanced level.
As I explained to you today in class, in this way
If you want to learn it in an even better way
I have designed a course that is
You will get it for just 899 rupees, and this course here
No, after completing this course, I guarantee it.
You will start speaking on your own within a month.
Give me any panel, and I can wire it.
I can also program that panel myself.
I don't need anyone's help on this label.
You have been taught PLC programming in that course.
If you want to join the course that is available
So you just need to go to the Play Store there
An app will appear under the name Electrical Technician.
Please download this app and after logging in inside it
You will find classes on PLC and HMI programming there.
Which are only ₹899
You can learn PLC programming with good labels by joining that class with Joen.
In addition, we have the PLC programming course from Missive BC Company.
The programming of the advanced label program of CMAILS company is carried out.
The programming course is also available.
If you also want to do that, Joen
You can join through our app.
I will provide the link to all courses in the video descriptions.
I'll also pin it by commenting in the comment box.
You can also directly join the class from there
Apart from this, there is no other difficulty or problem.
You want to talk to me directly and personally
So, this WhatsApp number, on this WhatsApp number
You can contact me directly.
Now let's go to our PLC panel here
Let's start programming.
So, to program a PLC
You should have the PLC software.
And the name of the software is WPLsoft.
As you can see here, I have the WPLsoft software.
We will open this software here.
When the software opens, a corrupted program is displayed.
Which we had created, just to show a trial in it now
This is happening right here in this program itself.
So, I need to delete this program right now.
If I need to create a new program, I'll click on the file here.
And then I'll click on New here.
And here it says: What new project do you want to create here?
After clicking Yes, you will see that it is asking for the project title here.
What name would you like to give to this project here?
I'm providing the reverse forward starter here.
And after writing this, below us here
The PLC selection has to be made in the modal number.
And after that, the PLC you have here
What is the model number of this PLC?
As written here, the model number is Y12 SA.
So here we have to select sa.
Here it is, selected.
And after selecting
You will see the OK button here.
We'll just click here.
After clicking, here is our
The programming window that was open has now been opened.
Now we have to do programming
So, let's look here for programming
But I'll use a shortcut here.
So here, first of all, me
Attach the stop button
Inside the program
And the wiring of this stop button is
The X0 terminal of this PLC
It has been done there.
Therefore, I will write it here
LDI means NC
After that, leave a space.
And after that
This one has a push button
Where was the wiring done?
Which terminals?
X0, X1, X2
What was done on it?
You have to write his address.
So here we write down
X0
Because we have the wiring for it
Now I will click enter.
You'll see it right here
An NC contact has arrived.
This NC contact here
What has happened?
For our stock
After this, from here
power supply that will go
It will go to our Start Push button.
So, the Start Push button
I mean anacontact
Through this anacontact
So this push button
Where should the wiring be done?
You will have to write down his address.
And for anacontact
Whatever command you type
It happens here.
LD and then a space
And x1, you will have to write here
Because its wiring is done at x1
After that, enter
What do we need to do here next?
When we press the Start Push button
So we need to turn on this relay.
And to turn on this relay
The output of this PLC is
y0 has been used for it
So the output coil
to have operated
Here we write
out
So here I've written out y0
And we'll see, you
Here before us
An output coil has arrived, this one.
What should I do next?
This is our Start Push button
In parallel with this
Here we have
A holding circuit needs to be built.
Only then, when this relay
So to hold this
Here we will click
And after clicking
If we have to build a holding here
So here we will simply write OR
Now here we write
Whose holding do we need?
So here we have y0
Take the anode contact.
So you will see here the holding circuit
What is, has already become ours
Meaning, here a dual starter has become ours
Let's check this again later.
We will proceed with the programming ahead.
Look, right now
You won't have a PLC, will you?
You don't need a PLC requirement, do you?
Let me tell you how to check it.
After that, I will practically explain it to you right here.
How would you practically check it?
First, we check in the simulator.
You will find an icon for a simulator here.
After turning it on, you have
There is no compile button here
Please click here to compile.
Compilation is complete. Please write here.
If an arrow is showing up here
What you've written in your program is incorrect.
If the program is correct, then after this we will proceed with it
We will upload for uploading
Here is an instruction for writing to PLC Basement
It will come, the icon will come, this one
You will need to click here, and here you are
Okay, just do it. No changes should be made to this.
Just okay, okay after okaying
You will see that this program has been uploaded here.
After uploading the program, proceed with this
If you want to bring it online, then you'll check it out for that.
Here, there is an online button. Press this one.
Click here and you'll see it right here
Online has arrived, the green signal has arrived, meaning
This is our NCA, the power ahead
It's flowing, and this is anno, this
In open condition, therefore, there is no green here.
The signal is not showing up; now check about this
It says stop here, so stop
If it's written, you won't see everything here
We will have to bring this to run mode.
Here is the run icon for this.
Click and here is permission
You will see when you do it this much
Here is the Start button; I click it.
And the left button of the mouse does this
Click here to set it on now
Okay, I'll approve this. I'll approve this.
You will see here the output is on
It practically did not operate here.
Because I am here regarding the simulator
What will happen in the simulator?
What you have here as output is
You will directly see it as the current page loads
So you don't have a PLC here either
Yet you still use this simulator
You can learn the entire programming.
Now it has turned on here, turn it on again.
You must release the push button here
Then we'll click here and here
We'll set it off, then the push button
Even after leaving, our output remains active here
Now it has to be made into a cake.
We will click and here
We will set it on.
Now, as soon as you press here
Became output
Here, in this manner, you are here
Programming in the computer right now
You can check, but not during Phila's time.
We need the simulator here
I won't be using it, I won't be practicing, so I'm shutting down this simulator right here.
Now I have to establish communication with this PLC here.
We will check here for the option button to enable communication; click on this button.
And here we have to select the RS-232, after selecting this
You will get 3 dots here; you need to click on these 3 dots, and here is what you have
The cable for programming is this one; its name will appear, just like my Silicon Lab, so I'll click on it and confirm, and then after that
I will click on auto detect. The window will open automatically, which will be detected automatically. Since it's Galileo's gear detection, I will switch it off. Click the button twice to turn it off. Here it is.
It will be transferred.
Vrini increased the speed of the boat.
Wash and check these?
Then we will separate the wheat from the chaff.
And they asked him to complete it.
Alag vinyo shod dar gayi mata par
If she had come, he would have gone to the ortho clinic.
Because, you see, understanding the time required for wiring the PLC here is one thing.
The stop button here is always to be pressed.
But if you NC it, in this condition, what will this NC contract do?
As you can see here, the indicator light is glowing.
Why is it glowing? Because the signal is passing through it, and what happened to the signal?
The programming you have here has already been opened.
And as I press this, you'll see the signal has come back here again.
So, right now, due to this NC contract, if we press the star button
At this point, one thing is clear: if I actually use NC here
So in programming, you won't need to use NC here.
You will have to use Anno here for NC.
So, this contact here needs to be changed; we'll make the change online.
I will click on "online edit" and double-click here to change the name displayed here.
LDI is here, so LDI is just clicking, and I'll just confirm it here.
Now that I've pressed OK, look here—why has the green signal appeared?
Because I've practically used NC here, the signal is going through here, and Anno contact is now on.
And when it is turned on, the power supply will reach here and also reach this point, but the flow will not proceed further.
Now, after making the changes here, we need to compile the program, so let's compile it.
And now use this button to upload it to the PLC, because we are doing it online; after clicking this button, we will select Yes here, and after selecting OK here
Now, look here—if I press the start button, the motor turns on here, and even if I release the start button, the motor will not turn off. To stop it, I'll have to press the stop button, only then will the motor turn off here. So right now,
For this, I'll go offline from the online mode and come back here to the offline mode. After arriving here, if we need to insert a new row, we'll do it on the left side here and click the insert arrow, and after clicking, a new row will appear. Now, at this place, we need to
This is our Reverse Push Button; press it.
The signal will go to the X2 terminal of the PLC.
And by reading this signal, the PLC will turn on this contactor.
And this contactor should make the motor run in reverse.
We will write LD here to program it.
And after that, what is the address of this Push Button here? It is X2.
So we'll write X2 here and press Enter
After this, which cabinet will the power supply go into?
If power comes to this X2 from our output, then in this condition, our Output number 2 should be ON.
We'll do OUT Y1 here, not Y2. Y1 will be used because here this is the case
Connected via our Second Relay, so here, set Y1 and OK
Now, let's look further ahead — here, our row has already been created, but right now
There is no signal here because either we need to connect it from this Row or
You can connect via this vertical line, either from here, but here we have only one
You must use the Stop Button, the one here; in this condition, from this point, I draw a vertical line.
For this, look here; there is an option for a Vertical Line, and an icon is provided. Click on this icon.
And when you click, you'll see that the vertical line has now been connected here, along with it
Once connected, the push button to turn on the reverse contactor is also connected.
Here, we will enter LDI and Y1, and here the NC算法 has appeared.
So after doing all this programming, what happened here? Our Reverse Overstarter is now fully programmed.
Now, after making this, we will compile it here.
The compiling button, click here for this one
And it will be compiled.
There was no difficulty in compiling.
So now we upload it.
After uploading, you'll see here our
The starter will begin operating in the Reverse Forward mode.
Done it, yes. After saying yes, we do it immediately.
And they come online via the online mode
Now, watch, now I'm going to press this Start Push button right here.
What's currently happening with the mortar forward here?
You will see here that our forward indicator is going off.
Now I need to run this mortar in reverse, so first I'll turn it around.
But before that, if I forward press, look here, nothing is happening.
You will see that the bit is going high in the PLC program here.
We're going to make it so that everyone here will press the big button, mortar will be made
So, how easily we have also done the PLC wiring here
And programmed it too
Let's do one more thing in this.
Here, I have an indication light installed.
This indication light is connected via these two relays.
The one with red and green is used for this.
Right now, brother, the red indication, relay number 3
And the green indication that is there
It is connected with relay number 4 here.
I also want to turn this on together with reverse forward.
I mean, I also need an indication here.
So, we will click on this icon for online editing.
After clicking, we will insert a new row here
What will happen in this OUT
Why am I taking output
Because I need to turn on this light
We are not to provide the input signal; what do we need to do?
This circuit we have here
When this happens, along with it, I will also be here
To turn on the red light, for this purpose
This one connected to Y3, so here is OUT
And then I'll give a space and write y3.
If I want to write a comment here, which one is for whom?
For instance, here is the device comment list
It will be found, it will be awakened, and please write it down.
x0 For whom can you write here
And below, the bar is reversed, our bar
Done for y2 reverse
y3 our forward on
indicator light to forward on
Now, regarding y3, it's our reverse.
For "on" I wrote "reverse on"
I've had this type here, we've had
Write device comments for writing device comments
Let's just comment on this.
When you cut it, you'll see here
Comment has arrived, it's with us now.
Here, all the comments are written down; good, we have an address.
Wrongly entered, it should be y4 y3 for us
Because counting, which is y0
If y1, y2, y3 exist
It's starting from y0, so here it is at the end
It's supposed to be y3, but it's been mistakenly set to ender.
y4 will not happen, y3 will happen
As soon as you press y3, you'll see "reverse on" written here.
It's here, let's go, enough of this.
What do we do with it online?
Not feeling it
So we will upload this.
But the bar will not be uploaded; you will click on this instead.
And here we will just say yes.
Our change has already taken place.
Here, keep going back and forth
No, but I will definitely do it.
Right now, I'll become the talk of the town here.
The super mute motor does not cause fear.
The gate has closed.
I should reverse the car.
I have this bottle too, I'll go in reverse.
And we'll see here, the reverse indicator light has already turned on.
Okay? The indication light here is glowing backwards because
Here, the wiring we have has changes in the wiring.
Let's fix this; what can we do?
We need to change only in programming.
If I want to make changes in programming here
So what should I do? Regarding this y2, on the surface of y2
I'll give you a league in this world, y3
And here is our Y23
We'll set this to y2 here.
Of this type
Now, after doing it this way, our program has changed here.
We will have to write it before this.
we do it
And after writing, you'll see it right here
Everything with us is fine.
Now, look here, now I'm printing this
Now the red light has turned on here.
Because we've connected it with forward.
Changed in the program
I want to stop, pressed the stop button, the motor turned off
Now turn on reverse.
The reverse indication should glow with reverse.
So I'm going to print this button
I can go in reverse.
And the reverse indicator light came on.
So I didn't change the wiring
in programming, change it to
Here, everything has been completely changed.
Okay
So, friends, as you've seen
Wiring a PLC
And programming the PLC
How simple it is
If you also learn PLC programming, then
When you first time
You will create a program, small one
The one I created using reverse forward
Create the same program if you will
And the program was created.
So much motivation will arise within you
that you yourself within a month
The complete PLC programming
You'll learn well on good labels
But to learn, you need one
Classes with proper structure would be needed
I will provide you with the classes
So for him, in our electrical technician app
You will receive a course.
PLC and HMI programming
You join that class
You can learn PLC programming very well on excellent labels
You don't even need to go anywhere; you're already at home.
I've already provided the class link in the video's description.
Moreover, if you have any doubt or question in your mind
You can directly talk to him via this WhatsApp number.