Dumpster Dresser Gets a Stunning Restoration

Trash To Treasure
3 followers
Literally pulled from a dumpster, this mid century chest of drawers was about to be scrapped permanently. I did what I could to keep this out of the landfill.
#furnitureflip #refinishing #furniturerestoration #midcenturyfurniture #vintagefurniture #restoration #diyhome #furniturerepair #furnituremakeover #transcendfurnituregallery
AI Generated·May contain errors
Video Summary
AI GeneratedAngie, a furniture refinisher, restores a discarded mid-century walnut veneer chest of drawers. The piece was found in a dumpster, plagued by missing finish, broken hardware, and an excessive buildup of candle wax used to combat sticking drawers. Through deep cleaning, structural repairs, and a natural oil finish, she saves the piece from a landfill.
Welcome back everybody. Today I'm back at Best Bins. I was given a call about a piece that was
pulled from a dumpster and this is it. This is a four drawer mid-century style chest of drawers,
walnut veneer, Canadian made. At first glance the obvious issues are with the finish. There's areas
where it's missing, scratched, the hardware is broken and incomplete, but inside the piece is
where it really gets interesting. All of this white stuff, it's not powder, this is wax, as in
candle wax. We've got some mouse poop in here as well. Something that's important to keep in mind
because you know a lot of us like pulling things out of the trash, keeping it out of landfills,
but sometimes there is a reason that something is thrown away. Looking at this back crack here,
how it's all dirty and a little bit stained, this is often where bed bugs like to hide and you'll
sometimes see their excrement there. No worry of that here, it's just mouse poop, but just something
to keep in mind. Make sure you check pieces that you pull out of the dumpster really, really well.
Let's get into this flip. My name is Angie and I refinish furniture. Sometimes I paint and sometimes
I don't, but I always do what I can to save old pieces from the trash. Welcome to my workroom.
Now almost everybody knows that old trick for dealing with a piece of furniture with the sticky
drawers and that is to rub a little bit of either bar soap or candle wax along the rails and it's
supposed to in theory help it slide better. When you get to a point where you need this much wax,
you need a repair. You don't need to add more wax. This is the most I've ever seen on a piece and
it's probably why this ended up in the dump. This piece has solid wood drawers except for the back
panel which is plywood and the two side panels of the carcass itself are solid wood with veneer
What seems to have happened here because we live in Nova Scotia where there's wild swings in
humidity throughout the seasons, my guess is that these would get super stiff in the summer
and you know work normally in the winter, but it clearly got to a point where they just weren't
sliding at all so someone's last resort was all of this wax and clearly it didn't work so it got
stuck in the shed or a basement which is where the most poop happened and then finally someone said
just throw it out. I did notice something a little odd with the drawer guides. There's three holes
here at the back and normally with these mid-century pieces, especially Canadian made,
I see it all the time, they would have had those plastic guides on the back so it's kind of odd
to see a wooden guide with a plastic guide. I don't know if the wooden ones were added later
on to try to mitigate some shift in the drawer. I don't know. This is a bit of a mystery.
The majority of the time spent on this project was simply cleaning it and it's tricky for a
I didn't want to use something that would dissolve the wax because there was the risk of spreading
it even further, but sanding it off is a bit of a risk as well. It heats up and can melt the wax
so it was a bit tricky to kind of get all this done. It did work out pretty well though with
the sanding. I just had to change my sanding pads a lot more often than normal. Going back for a
second to what I said earlier about bed bugs loving to hide in cracks and being able to see
their excrement. It looks a lot like this but this is actually from rust but that same sort of
blackish stain that tends to be what it looks like. Since bed bugs feed on blood it kind of
makes sense that it would look similar to rust stains. Again no box on this one I just wanted
to point that out. So a lot of these staples were rusty as I mentioned so any that were loose or
rusted I pulled out because I am going to be re-stapling the bottom to make it more secure.
I'm not sure yet what I want to do regarding these drawer slides now. I was considering
remaking them but seeing as this piece already tends to be prone to a lot of swelling with the
humidity I may just stick to the plastic guides that this would have come with originally. The
plastic guides keep it on the track but they allow for a little bit of movement left and right so
unless you're dealing with something that is really well made and properly fitted, which is probably
not the case with these mass-produced ones, wooden guides aren't always the best in places
with a lot of humidity. Because this little section is more indent than chip I'm actually
going to add a little bit of water and use a hot solder iron to try and steam the wood fibers back
up to level. This usually works pretty well on solid wood so I'm hopeful that I can move this
up slightly. I opted to sand down the wooden handles using my surf rap mainly just to save
time. I could have done this by hand but I'm pretty good with manipulating this thing and
being able to preserve the profiling curves on things like handles. Making sure of course to
label each one so that I know exactly which drawer it belongs to. So there's something interesting
about this drawer. This one was actually on the bottom when it came to me but I know that that is
not where it belongs and the hardware is broken but I have a solution for that. I'm popping the
screws into a bath of evapo-rust just to remove any of the rust from them before I put them back
on the piece. And now that the drawers themselves are cleaned up I can move on to the main part of
this cabinet. Now initially I thought I was going to have to replace these they looked so rough but
once I took them out and started to clean them off I realized that they were actually in pretty
good shape they just really needed to be cleaned up. This bottom panel however is definitely getting
replaced and I'm actually going to be replacing the back panel as well. That is where a lot of
smell tends to infiltrate and hang on in some of these older pieces especially if they're kept in
a damp area like a shed or basement. Sometimes you clean a piece up really well or you finish it
inside and out and you still can't get rid of the smell. Often it's in those panels and a quick
replacement it's pretty cheap to do especially if you use hardboard or a thin plywood to replace
those panels. It can really make a big difference in the smell of a piece.
So I want to talk for a second about mid-century pieces and how they are finished depending on
where they're made of course. The most common finish on these is lacquer and they would have
used multiple layers, they would have used glazes, sometimes toners. The goal with using all of those
products together is to try to get a uniform color. The vast majority of these pieces are veneer and
you can have such a wide range of colors and grain patterns in veneer that these manufacturers
would try to camouflage that and try to make it look like it all came from the same tree,
the same boards. On pieces that are historically important, and let me just state right now,
not every mid-century piece is historically important. There's a whole army out there of
people who lose their marbles over people refinishing mid-century pieces not understanding
that a lot of these are department store quality mass-produced pieces, not high-end. That said,
high-end pieces I try to keep the finish true to its original look and y'all have seen videos where
I've done that. But me personally, as a lover of walnut wood grain and all of the variety in color
and tone and character, I love just a natural finish on it. So on pieces like this that aren't
super high-end and may have some interesting figure, like on this one there's a really cool
figure on the top, this is the type of piece that I like to put a natural finish on and I'm going to
be using Odie's oil on it. So now I have replaced the back panel and the bottom panel. The insides
are clean and sanded and now I'm just re-adding these wooden runners. These just have a bit of
glue at the back and a screw in the front and it looks like someone at some point added nails
in the front as well next to the screw. That wouldn't have been an original thing. I'm not
re-adding it. Someone likely did it to try to sort out whatever was going on with the drawers
unsuccessfully. So all four drawers have these three holes in the back and it fits exactly with
one of these plastic guides. These were super common on 60s and 70s pieces, not so much 50s
that tended to be more the wooden runners. But the point is they're super common, they're easy to
find if you happen to break one and they do work well. They also allow the drawer to shift slightly
left or right which is super helpful in areas like Nova Scotia where there's a ton of humidity
throughout parts of the year. I tend to save vintage hardware pieces even if they're broken
and this is exactly why. These pieces that the dresser came with were missing the little toggle
part. There's two that I needed and I had two toggles exactly from another set that was damaged.
It looks like they were painted at one point so I'm just going to strip the paint off and then
I'm going to polish these. These are solid brass so cleaned up this is what these look like. Now
the only thing to consider here is that brass is super soft and the reason these toggles are likely
broken is because the drawers were sticking and someone pulled so hard that it pulled the toggles
out of the main part. Now that the drawer is moving freely I don't see it being an issue but it's just
something to think about. This pencil trick is something I do fairly often when I'm sanding
veneer. It's just very light pencil marks across the top so you know exactly where you haven't
sanded and it can prevent someone from sanding too much. If you're doing multiple grits you
would do this in between each grit all the way up. Some of the grain patterns on these bookmatch
veneers are just phenomenal and there's actually a really cool sort of ripple effect in this
particular veneer on the top which you'll see in the reveal. I'm using the Odie Super Duper
Everlasting Oil in Dark. Now what that means it's not like a stain where it's going to immediately
turn the wood dark. It's going to turn whatever the natural color of the wood is. What the dark
does is help expedite that sort of patina aging process of the wood where it deepens in color.
I really like using this on woods like cherry, walnut, mahogany where that deep rich look is
really where it's at. One decision I had to make was what to do with these handles. I opted to
leave them their natural light color. I thought it would be just a little pop of contrast where
there's so much brown but the legs, even though they're the same wood as the handles, they're not
in as good a condition. You can see every leg has some patchwork on it and that's pretty typical
when they use things like toners over top of wood. So I'm going to be staining the legs brown
and of course adding some of the ores to that as well. Now one of the last things I have to do
is to seal the drawer boxes themselves inside and out where I sanded everything smooth. It has to
be sealed so I'm using about a half a jar of regular odies oil and adding a pretty good splash
of the safer solvent in there. What that's going to do is give me a version of this that I can
spread on with a brush and wipe back super easy. It's kind of similar to the Howard feed and wax
treatment that I do but it's an odies product so I feel like it's going to work a lot better
for sealing. The feed and wax is not really a sealant, it's more of a polish or a conditioner.
Now going back for just a second to some earlier footage, I want to talk about this
bottom section that I pried off. I don't believe I need this to keep the drawers going in and out
properly but I do think this is going to give a little bit of stability to that bottom board
which does have a little bit too much flexibility for my liking. So even though it's not in this
video, I am going to cut up some new inserts to put on the bottom just to stiffen up those drawers
a little bit. It's pretty crazy now looking back at what I started with. This poor little piece was
literally minutes away from being gone forever but big thank you to Lamont at Best Bins for
seeing the potential in this and giving me a shout. As always, thank you so much for watching,
I hope you enjoy the reveal and I will see you next time.
